Newsletter Signup

Sign up for our newsletter and get the lastest Rebel news!



Official PayPal Seal




Currently viewing: HOME > Wrangler JK 2007-2017 > Armor and Protection
B-Pillar Crossmember Plated Fuel Tanks
Rear Corner Armor Rocker Armor Roll Cages / Accessories
Skid Plates Tailgate Plates
Sort By:
Page of 1
Poison Spyder Jeep JK License Plate Delete
MSRP: $13.20
Price: $13.00
Save $0.20!
Poison Spyder JK 2-Dr Rocker Knockers
MSRP: $632.50
Price: $604.00
Save $28.50!
The new JK Element Plate from Vector Off-Road replaces the OEM tire carrier. Jeep JK Rear License Plate Delete Cover for those relocating the license plate from its stock mount. Poison Spyder Rocker Knockers; protect your JK's rocker panel area while enabling you to slide over rocks and obstacles.
Poison Spyder Jeep JK 2 Door Rubber Liner
MSRP: $55.00
Price: $50.00
Save $5.00!
Poison Spyder Jeep JK 2 Body Protection Armor
MSRP: $218.90
Price: $209.00
Save $9.90!
Poison Spyder Jeep JK Tailgate Protection
MSRP: $60.50
Price: $55.00
Save $5.50!
These liners install between your Poison Spyder JK Body Armor and the Jeep's body, protecting the factory paint from scuffs and scratches. They also provide a small measure of shock absorption from rock hits, and help to quiet down and squeeks and rattles that may develop over time between the Body Armor and the Jeep sheetmetal. Precision-cut from quality rubber sheeting. Poison Spyder Jeep Wrangler body armor kits are standard equipment for JK models that are venturing into off road situations where body damage is eminent. The Poison Spyder JK Tramp Stamp perfectly fits over the raised vent area in the center of the tailgate, to complete the Poison Spyder gear surrounding your Jeep JK.
Poison Spyder Jeep JK 4 Door Sliders
MSRP: $665.50
Price: $605.00
Save $60.50!
Poison Spyder Jeep JK 4 Door Brawler Rockers
MSRP: $885.50
Price: $846.00
Save $39.50!
Poison Spyder Jeep JK 4 Door Rubber Liner
MSRP: $60.50
Price: $55.00
Save $5.50!
Poison Spyder Rocker Knockers; protect your JK's rocker panel area while enabling you to slide over rocks and obstacles. Poison Spyder Brawler Rockers; protect your JK's rocker panel area while enabling you to slide over rocks and obstacles. These liners install between your Poison Spyder JK Body Armor and the Jeep's body, protecting the factory paint from scuffs and scratches. They also provide a small measure of shock absorption from rock hits, and help to quiet down and squeeks and rattles that may develop over time between the Body Armor and the Jeep sheetmetal. Precision-cut from quality rubber sheeting.
Poison Spyder Jeep JK 4 Body Protection Armor
MSRP: $229.00
Price: $209.00
Save $20.00!
Poison Spyder Jeep JK 4-Dr B-Pillar Covers
MSRP: $93.50
Price: $85.00
Save $8.50!
Poison Spyder Jeep Wrangler body armor kits are standard equipment for JK models that are venturing into off road situations where body damage is eminent. Continue the protection of your Poison Spyder JK Body Armor, all the way up the B-Pillar of the 4-door JK! CNC laser-cut roll cage gussets for 90° tube joint, with web design.
Vector JK Element Brake Light Riser
MSRP: $19.95
Price: $14.99
Save $4.96!
CNC laser-cut roll cage gussets for curved tube joint, with web design. CNC laser-cut roll cage gussets for 110° tube joint, with web design. This plate is needed to clear RotopaX containers mounted to the element plate.
This simple kit consists of three 1 inch spacer plates and stainless hardware to relocate the factory JK subwoofer 1 inch forward to allow clearance for the MP Table to be mounted to the tailgate. Never hassle with transferring gas from gas cans again! The NEW GenRight Crawler 20 Gallon Gas Tank. This is a great upgrade for anyone looking for a "functional" rocker guard with a step on their JK.
Poison Spyder JK 2-Dr Brawler Rockers (Steel)
MSRP: $834.90
Price: $797.00
Save $37.90!
This is the NEW GenRight Crawler 20 Gallon Gas Tank to fit a Jeep JK (2007-2010). Jeep JK's, are extremely vulnerable to rocker armor damage on the trail. Poison Spyder Brawler Rockers provide the ultimate rocker armor protection while actually enhancing your Jeep's off-road capabilitynot to mention they look bad-ass! The Poison Spyder Bolt-Together Trail Cage Kit is the strongest add-on cage you can bolt in to your JK. Designed to strengthen your Jeep's existing roll bar, the Poison Spyder Trail Cage Kit fortifies the driver and passenger area by adding a robust cage fabricated from CNC laser notched, NC-bent DOM steel tubing and CNC laser cut, precision brake-formed 3/16" plate steel components. When shopping for a cage kit for your Jeep, make sure that any product you are considering uses stronger DOM, "Drawn Over Mandrel" structural tubing rather than the cheaper welded seam tubing that some manufacturers use.
Poison Spyder JK 4-Door Trail Cage C-Pillar Kit
MSRP: $163.90
Price: $149.00
Save $14.90!
ACE Engineering JK Rock Sliders (2 Door)
MSRP: $368.50
Price: $335.00
Save $33.50!
For those looking to further enhance the JK 4-Door Trail Cage installation, the Poison Spyder C-Pillar Kit ads strength to the rear passenger portion of the OE cage.  This kit must be welded in to the OE cage, but it bolts in at the lower end so the entire cage assembly may still be removed from the Jeep.  The C-Pillar kit consists of CNC laser cut lengths of 1.75" OD, .120" wall DOM tubing, and engineered foot plates that are fabricated from CNC laser cut, brake-formed 3/16" plate steel.  Convenient indexing tabs and slots are provided where the DOM tube connects with the foot plate, making assembly quick and easy. Slimline design for mounting in small spaces. Available in red or amber, with colored lens

Includes grommet and 5" pigtail
Looking for performance on and off the trail? Weve got you covered. Whether you call them rock sliders, rock rails, nerf bars or rocker protectors, there are a few features you need to have.
ACE Engineering JK B-Pillar Guard
MSRP: $148.50
Price: $135.00
Save $13.50!
Poison Spyder JK 2-Dr Brawler Rockers (Aluminum)
MSRP: $944.90
Price: $902.00
Save $42.90!
If youre serious about protection, good news - so are we. Thats why we developed the ACE B-Pillar Guards. They're the ultimate armor to keep your Jeep looking good, even when youre pushing the limits off-road. This is the main Sports Cage which includes everything from the factory bar forward to the dash and it fits hard tops or soft tops. Due to popular demand, Poison Spyder Brawler Rockers for JK are now available in light-weight aluminum.
Poison Spyder JK 2-Dr Body Armor (Aluminum)
MSRP: $302.50
Price: $289.00
Save $13.50!
Poison Spyder JK 4-Dr Brawler Rockers (Aluminum)
MSRP: $1,065.90
Price: $1,018.00
Save $47.90!
Poison Spyder JK Extreme Duty Trans-Mount Crossmember 07-11
MSRP: $229.90
Price: $209.00
Save $20.90!
Poison Spyder JK Body Armor is recommended equipment for any JK venturing into off road situations where body damage is eminent. Due to popular demand, Poison Spyder Brawler Rockers for JK are now available in light-weight aluminum. Replace your JK's weak stock transmission crossmember with Poison Spyder's Extreme Duty Crossmember!
Jeep JK XRC Fender Flare Set By Smittybilt
MSRP: $299.95
Price: $269.95
Save $30.00!

Smittybilt XRC Fender Flares

The XRC Fender Flares are 100% steel construction, for extra durability. Each XRC Fender Flare is powder coated for immediate use and durability or they can be painted to color match your ride. XRC Fenders are streamline designed to help increase suspension articulation while maintaining the street-ability look. Less is more when it comes to XRC Fender Flares, when the OE fender does not meet your needs.

  • 100% steel construction for extra durability
  • Power coated for immediate use and durability or can painted to match (Please call for powder coating options and price)
  • Stream line design to help increase suspension articulation while maintaining the street-ability look
  • Less is more when it comes to XRC Fender Flares, where the OE fender does not meet your needs
Protect your rear lower control arms with our heavy duty bolt on skid plates.  Each skid is fully boxed 3/16th inch steel and hand welded for extreme attention to detail. Special Edition of the beefiest differential armor out there!

This 65-45-12 ductile iron covers are a clean, trim shape that provies ample clearance for front or rear applications where steering or gas tank clearnace is a concern due to its slim 3 9/16" height.

Rebel Off Road  badge is laser cust stainless steel. Gasketed fill plug with dipstick, socket head allen hardware and cover gasket included.

Fits RockJock 60 & 70, all high or low pinion 60s and low pinion Dana 70s. Cover ships raw.
ACE Engineering GATE PLATE
MSRP: $44.00
Price: $40.00
Save $4.00!
The TeraFlex Heavy Duty Adjustable Tire Carrier & Tailgate Reinforcement Kit is designed to carry up to a 37" tire over the most extreme trails and obstacles, and provide easy and immediate access to the rear cargo area with a single action. For those who choose to delete or relocate their spare tire, the ACE Gate Plate is a great way to finish the rear of your JK . It comes with an 1/8" black powdercoated steel plate and mesh gasket designed to cover the vent flaps in your tailgate. The steel plate has the ACE logo cut-out, giving this Gate Plate a great look.
This is a true rocker guard for the Jeep JK. It's sleek design is perfectly contoured to the body and has been trail tested for 2 years!

This is a great upgrade for anyone looking for a "functional" rocker guard with a step on their JK.
Poison Spyder JK Trail Cage Kit '11+
MSRP: $988.90
Price: $944.00
Save $44.90!
This is a "slider" side bar kit that can be added on to the standard rocker guard on a factory Rubicon 2 door Jeep JK.

This is a great upgrade for anyone looking to add on a "functional" step to their JK. Although this kit does reinforce the factory side protection it is only good for medium duty trail protection of the body.
This is the new JK "tire carrier delete" tailgate plate from GenRight Off Road. The Poison Spyder Bolt-Together Trail Cage Kit is the strongest add-on cage you can bolt in to your JK. Designed to strengthen your Jeep's existing roll bar, the Poison Spyder Trail Cage Kit fortifies the driver and passenger area by adding a robust cage fabricated from CNC laser notched, NC-bent DOM steel tubing and CNC laser cut, precision brake-formed 3/16" plate steel components. When shopping for a cage kit for your Jeep, make sure that any product you are considering uses stronger DOM, "Drawn Over Mandrel" structural tubing rather than the cheaper welded seam tubing that some manufacturers use.
The perfect upgrade for your Jeep Wrangler JK D30 or D44 (Rubicon) front housing! Requires welding.
Rock Hard 4x4 JK Aluminum Transfer Case Skid is made from 1/4" Aluminum laser cut and CNC bent for a perfect fit. This Transfer Case Skid gives you the added protection you need for the toughest trails you can wheel on. Comes powder coated black with a slight texture. Fits 2007-2014.
Rock Hard 4x4 JK Aluminum Gas Tank Skid is made of 1/4" aluminum. Laser cut & CNC bent for a perfect fit. Solid protection for the weight conscious Jeep owner. Comes powder coated black with a slight texture. Fits Jeep JK 4 Door 2007-2014.
Rock Hard 4x4 JK Aluminum Fuel Tank EVAP canister shield is easy to install, uses factory bolt holes and protects the canister from damage on the trail. Fits 2007-2014. Rock Hard 4x4 JK *Aluminum* Oil Pan & Transmission Skid Plate fastens to the frame in front of both motor mounts and at the main crossmember in the rear for maximum protection. Also, to make oil changes easy and to minimize clean-up, this lighter weight, skid plate comes complete with a removable oil drain access plate. All bolts at the frame crossmember are replaced with tapered bolt head protectors to allow rocks to slide across them with ease and still allow you to get a socket on the bolt heads for removal. Our tests have shown stock driveline to clear this skid at 40" of flex. This aluminum skid is made of 1/4" aluminum with solid protection for the weight conscious Jeep owner. Comes powder coated black with a slight texture. Fits 2007-2014. Rock Hard 4x4 JK *Aluminum* Oil Pan & Transmission Skid Plate fastens to the frame in front of both motor mounts and at the main crossmember in the rear for maximum protection. Also, to make oil changes easy and to minimize clean-up, this lighter weight, skid plate comes complete with a removable oil drain access plate. All bolts at the frame crossmember are replaced with tapered bolt head protectors to allow rocks to slide across them with ease and still allow you to get a socket on the bolt heads for removal. Our tests have shown stock driveline to clear this skid at 40" of flex. This aluminum skid is made of 1/4" aluminum with solid protection for the weight concious Jeep owner. Comes powder coated black with a slight texture. Fits 2007-2014.
Rebel Off Road Universal 2-4lb Fire Extinguisher Holder for Jeep Wrangler JK 2007-2014
MSRP: $39.95
Price: $29.95 Guaranteed in stock!
Save $10.00!
Rebel's universal fire extinguisher holder. All metal fasteners (just like our famous grab handles) and 100% made in the USA. The three heavy duty mounting straps (most others have two straps) are adjustable for most roll cage diameters - but are PERFECT for the roll bar + padding that comes standard on all 2007-2014 Jeep Wrangler 4-door and 2-door models. Rock Hard 4x4 is very proud to introduce the first overhead sports cage section for those running 3rd row benches in their Jeep Wrangler JK Unlimiteds! These popular 3rd rows are made available by Teraflex's brackets and the rear set from a Jeep Wrangler JK 2-door. Rock Hard 4x4 Parts JK Oil Pan, Transmission and Dual Catalytic Converter Skid Plate fastens to the frame in front of both motor mounts and at the main crossover in the rear for maximum protection. An extension on the left-hand side protects the normally exposed converter which would be a very expensive fix if damaged. Also, to make oil changes easy and to minimize clean-up, this skid plate comes complete with an oil drain access plate. All bolts at the frame crossover are replaced with tapered bolt head protectors to allow rocks to slide across them with ease and still allow you to get a socket on the bolt heads for removal. Our tests have shown stock drivelines to clear this skid at 40" of flex.  Fits 2007-2014.
The Jeep JK Flexible Bumper System, allows you to create a bumper that suits your lifestyle, whether it be Rock Crawling, Mall Crawling or Desert Romping. See all of the available Top Hoops and Side Caps.
2007 - 2013 Jeep JK Stealth Fighter Front Bumper Center w/Tow Hooks and Flush Mount holes for LED Lights. Fits up to a 12k lb. winch, comes with standard flat ends and bolts directly to the frame without any interference to airbag sensors. Tow Hooks allow for ease of towing, as well as recovery.
Features:
.120" Wall Steel Tube Construction
Laser Cut Skid plates, Tabs and Plates for a Precise Fit
Direct fit No Cutting or Welding required
Stainless Steel Hardware
**2013 and Newer models require the vacuum pump to be relocated**
**Winch Plate Limit is 10,500 lbs., use only winches at or under this approved pull rate to retain Bumper Warranty.
The A.D.D. Stealth Fighter Rear Bumper is a mix of style, function and flexibility. Designed to compliment our entire line of Stealth Fighter Products, it is engineered for strength and durability, plus with the many options available it is flexible enough to make it your own!
Flexible option include Choice of Powdercoating, With or Without cutout for tow hitch and your choice of adding light mounts for Rigid Flush Mount Dual/D2's
Features:
3/16" and 1/8" Plate used to strengthen and reduce weight
Laser Cut Skid plates, Tabs and Plates for a Precise Fit
Direct fit No Cutting or Welding required
The Stealth Fighter Heavy Duty Tire Carrier is a great option for the Stealth Fighter Rear Bumper. Direct bolt on unit with one hand rear door opening action and capable of holding a 37" Rear Tire. The hinge design takes the weight off the tailgate, but still operates as easily as from the factory. Add in a mount for Daystar Cam-Cans and the unit is complete.
Poison Spyder JK Tramp Stamp II with License Plate Mount
MSRP: $64.90
Price: $59.00
Save $5.90!
The New A.D.D. Offroad Stealth Fighter Side Steps/Rock Sliders are designed with function in mind. Beefy enough to provide protection in the most extreme conditions, yet many flexible lighting options to fit all of your rock lights.
Manufactured from 3/16" plate and gusseted slong the entire body, these are the toughest sliders on the market.
These Steps come with mounts for Rigid Industries 6" SR, A-Series and KC Cyclone LED Lights. Up to 3 - 6" SR's and 3 - A-Series or Cyclones can be added per side!
Features:
3/16" Steel structure
Laser Cut Skid plates, Tabs and Plates for a Precise Fit
Direct fit No Cutting or Welding required
Stainless Steel Hardware
The Poison Spyder JK Tramp Stamp II with License Plate Mount allows you to relocate your Jeep's license plate to the center of the tailgate, for those who run without a tailgate-mounted spare tire. The Tramp StampII is CNC laser cut from 1/8" aluminum plate and features the Poison Spyder logo. The JK License Plate Mount is CNC laser cut and precision brake-formed from 14 ga. aluminum. The License Plate Mount is offset to allow proper function of the tailgate vents. Both pieces are powder coated with a textured black finish. The Tramp Stamp II and License Plate Mount are installed using the OE spare tire mount bolts. Replace your JK's weak stock transmission crossmember with Poison Spyder's Extreme Duty Crossmember! This ultra-beefy crossmember is constructed of two pieces of CNC laser cut, precision brake-formed 3/16" plate steel. Check out the damaged stock crossmember in the photos below.
6" Ultimate Sports Cage Custom Handles Rear upper 4-door cage section. 4 and 2-Door Front Tee-Section Padding Kit
Rock Hard 4X4 JK Muffler Shield
MSRP: $149.95
Price: $149.99
Rock Hard 4X4 2007-14 JK Fuel Tank Skid Plate 2-Door
MSRP: $379.95
Price: $369.95
Save $10.00!
Optional muffler skid plate that is available for the Rock Hard 4x4 rear bumper. Rock Hard 4x4 Parts JK gas tank skid is made from 3/16" steel plate laser cut and CNC bent for a perfect fit. Rock Hard 4x4 Parts JK gas tank skid is made from 3/16" steel plate laser cut and CNC bent for a perfect fit.
Rock Hard 4X4 2007-2014 JK Transfer Case Skid 2 & 4 Door
MSRP: $389.95
Price: $229.95
Save $160.00!
Rock Hard 4x4 Parts JK Transfer Case Skid Plate gives you the added protection you need for the toughest trails you can wheel on. Rock Hard 4x4 Parts JK fuel tank EVAP canister shield is easy to install, uses factory holes and bolts and protects the canister from damage on the trail. This JK Fuel Canister relocation bracket is a must have for the serious off-roader.
All new for the Jeep Wrangler JK!

The strongest sliders available.  Mounts to factory style bolt holes (pinch seam and 3 body bolts) for extra secure mounting.

No drilling required!

Ships powdercoated black.
All new for the Jeep Wrangler JK!

The strongest sliders available.  Mounts to factory style bolt holes (pinch seam and 3 body bolts) for extra secure mounting.

No drilling required!

Ships powdercoated black.
Synergy Suspension Universal Grab Handle
Description:

  • Synergy 2007-Present Jeep JK HD Replacement Transmission Cross Member
  • Compatible with both 3.8L and 3.6L gas engines with either automatic or manual transmissions.
  • Laser cut and CNC formed from 3/16" crush resistant Grade 50 A-572 steel plate to reduce weight without sacrificing strength
  • Fully boxed construction with internal gusseting provides maximum strength where it counts.
  • Compatible with stock and most aftermarket skid plates
  • Not compatible with diesel models
Includes:
  • (1) 5715-01 Jeep JK HD Transmission Cross member
  • (5) Gr8 1/2" flat washers
  • (5) 1/2-13 UNC hex head 1.0" long bolts
Description:
  • Synergy 2007-Present Jeep JK Diesel HD Replacement Transmission Cross Member
  • Compatible with both automatic and manual transmission equipped 2.8L CRD engine.
  • Laser cut and CNC formed from 3/16" crush resistant Grade 50 A-572 steel plate to reduce weight without sacrificing strength
  • Fully boxed construction with internal gusseting provides maximum strength where it counts.
  • Compatible with stock skid plates
Includes:

  • (1) 5716-01 Jeep JK HD Transmission Cross member
  • (5) Gr8 1/2" flat washers
  • (5) 1/2-13 UNC hex head 1.0" long bolts
Jeep JK Dana 30/35/44 Lower Control Arm Skid Plate
The Billy Rocker offers a new look along with an impact absorption zone. By using a combination of pieces we have developed the ultimate in rocker protection. The Billy Rocker offers a new look along with an impact absorption zone. By using a combination of pieces we have developed the ultimate in rocker protection. The Billy Rocker offers a new look along with an impact absorption zone. By using a combination of pieces we have developed the ultimate in rocker protection.
Nemesis Billy Rocker - JK 4 Door
MSRP: $799.99
Price: $749.00
Save $50.99!
Titan Tub Armor is an excellent first step in the journey of building a Jeep. No matter where you look even on the showroom floor you see Jeeps with some sort of rocker protection. Titan Tub Armor is an excellent first step in the journey of building a Jeep. No matter where you look even on the showroom floor you see Jeeps with some sort of rocker protection. The Billy Rocker offers a new look along with an impact absorption zone. By using a combination of pieces we have developed the ultimate in rocker protection.
Nemesis Odyssey Step Rocker - JK 4 Door
MSRP: $799.99
Price: $699.00
Save $100.99!
The Billy Rocker offers a new look along with an impact absorption zone. By using a combination of pieces we have developed the ultimate in rocker protection. The Billy Rocker offers a new look along with an impact absorption zone. By using a combination of pieces we have developed the ultimate in rocker protection. This is a slider made by Nemesis Industries for the Teraflex Long Arm Mount.
Product Overview
At Nemesis we challenge ourselves to produce new and complete solutions for everyday problems. There are two options for protecting the evap. canister, you can build a skid plate to cover it in it's factory location, or you can relocate it to a more protected area of the undercarriage. Depending on your long term build plan you may choose to relocate it which is why we developed this solution. The relocation kit comes with everything required to move the canister from its factory position to above the rear axle. Constructed of aluminum, our kit does shave a few ounces but more importantly we dramatically decreased the potential for damage due to objects on the trail and have eliminated the chance of damage from exhaust heat. Now you can have the confidence to tackle the trails knowing that your evap. canister will be protected from all hazards.
Build Specs
You can confidently install this kit knowing it has been constructed from quality materials by the craftsmen at Nemesis Industries. Using a water jet the mount is cut from 3/16" aluminum sheet. The pieces are then dried, cleaned, and sanded to remove slag leftover from the cutting process. Forming of the pieces is handled by our CNC press brake. The parts are then welded and metal finished providing a seamless finish. Upon completion the parts are inspected to ensure a precise fit.
Front Skid (Vanguard, Crusader, Mauler) - Jeep Wrangler JK

JcrOffroad's front lower skid protects the Wrangler JK-s lower crash bar as well as the Rubicon electronic sway bar from damage on the trail.

CNC cut and formed from 3/16" Steel.
Fits with our Vanguard, Crusader and Mauler JK Bumpers.
Easy Bolt-on Installation.
Includes mounting hardware.
Includes JcrOffroad Sticker.
Hand built in the USA!

Front Skid (Dagger, Defender) - Jeep Wrangler JK
JcrOffroad's front lower skid protects the Wrangler JK-s lower crash bar as well as the Rubicon electronic sway bar from damage on the trail.

CNC cut and formed from 3/16" Steel.
Fits with our Dagger and Defender JK Bumpers.
Easy Bolt-on Installation.
Includes mounting hardware.
Includes JcrOffroad Sticker.
Hand built in the USA!
Wrangler Rock Sliders - JK

JcrOffroad's Crusader Rock Sliders are a triple threat all built into the same package; a trail proven rock slider, a usable step and offroad rock lights!

CNC cut and formed from 3/16" Steel.
Built in Hi-Lift Jacking points front and rear.
Built in LED Rock Lights (lights included).
Mounts using the lower body mounts and an additional 18 body attachment points.
Includes mounting hardware.
Includes JcrOffroad Sticker.
Sold in Pairs.
Hand built in the USA!


You will need a 17/32" drill bit for this installation.

Wrangler Rock Sliders - JK

JcrOffroad's Crusader Rock Sliders are a triple threat all built into the same package; a trail proven rock slider, a usable step and offroad rock lights!

CNC cut and formed from 3/16" Steel.
Built in Hi-Lift Jacking points front and rear.
Built in LED Rock Lights (lights included).
Mounts using the lower body mounts and an additional 18 body attachment points.
Includes mounting hardware.
Includes JcrOffroad Sticker.
Sold in Pairs.
Hand built in the USA!

You will need a 17/32" drill bit for this installation.

Wrangler 2 Door Rock Sliders - JK Classic

The Classic Sliders are tried and true, giving you maximum strengthen and protection for your Jeep's rocker panels.

Cut and formed from 2x2x3/16" box tubing.
1 3/4" Angled round outer tubing.
Includes mounting hardware.
Sold in pairs.
Includes JcrOffroad Sticker.
Hand built in the USA!

Not compatible with body lifts.

Wrangler 4 Door Rock Sliders - JK Classic

The Classic Sliders are tried and true, giving you maximum strengthen and protection for your Jeep's rocker panels.

Cut and formed from 2x2x3/16" box tubing.
1 3/4" Angled round outer tubing.
Includes mounting hardware.
Sold in pairs.
Includes JcrOffroad Sticker.
Hand built in the USA!
Not compatible with body lifts.

JcrOffroad's Rocker Armor Skins are designed to give you rocker protection and keep a clean look to your JK!


  • CNC cut and formed from 3/16" Steel.
  • 18 body attachment points.
  • Includes mounting hardware.
  • Wheel well to wheel well coverage.
  • Includes JcrOffroad Sticker.
  • Sold in pairs.
  • Hand built in the USA!
  • JcrOffroad's Rocker Armor Skins are designed to give you rocker protection and keep a clean look to your JK!


  • CNC cut and formed from 3/16" Steel.
  • 18 body attachment points.
  • Includes mounting hardware.
  • Wheel well to wheel well coverage.
  • Includes JcrOffroad Sticker.
  • Sold in pairs.
  • Hand built in the USA!
  • Transfer Case Skid Plate - JK Wrangler

    Protect your transfer case from taking hits on the trail by adding a JcrOffroad Transfer Case skid to your Jeep Wrangler JK!

    CNC cut and formed from 3/16" Steel.
    Fits 2007-2015 Jeep JK Wangler, Sahara and Rubicon.
    Easy Bolt-on Installation.
    Includes JcrOffroad Sticker.
    Hand built in the USA!

    Gas Tank Skid Plate - JK Wrangler

    Free yourself of worry on your next trail ride with the JcrOffroad Gas Tank Skid Plate! These hand-built skids are made from 3/16" thick plate, bend and formed for a precision fit! 100% designed and manufactured in the USA!

    JcrOffroad products are renowned for their quality and this skid is no exception! Installation is a simple bolt on application.


    Exhaust Loop Skid Plate - JK Wrangler

    The Exhaust Loop Skid works in conjunction with the JcrOffroad Engine skid to protect the 2012-2015 Jeep JK Exhaust Loop Skid.

    CNC cut and formed from 3/16" Steel.
    Easy Bolt-on Installation.
    Includes JcrOffroad Sticker.
    Hand built in the USA!

    Evap Skid Plate - JK Wrangler

    Free yourself of worry on your next trail ride with the JcrOffroad Evap Skid Plate! These handbuilt skids are made from 3/16" thick plate, bend and formed for a precision fit! 100% designed and manufactured in the USA!

    JcrOffroad products are renowned for their quality and this skid is no exception! Installation is a simple bolt on application.  

    JK Skids Transmission Crossmember

    JcrOffroad's heavy duty crossmember will replace your weak, beat and battered factory crossmember.

    CNC cut and formed from 3/16" steel.
    Fits 07-16 Jeep Wrangler JK and JKU Rubicon with 3.6L or 3.8L, Auto or Manual
    Bolt on installation.
    Black Powdercoat finish.
    Includes JcrOffroad Sticker.
    Hand built in the USA!

    Trailgate Plate - JK Wrangler - Powdercoated Textured Black

    JcrOffroad's Trailgate allows for carrying RotoPax containers and doubles up as a trick 3rd brake light!

    CNC cut and formed from 1/8" Steel.
    Carry (2) 3 Gallon containers, (2) 2 Gallon containers or double them up for more capacity! (Sold Separately)
    LED Third Brake Light Included.
    Easy bolt on installation.
    Includes mounting hardware.
    Includes JcrOffroad Sticker.
    Hand built in the USA!

    JK Lower Control Arm Skid Plates

    JcrOffroad's Lower Control Arm Skid Plates allow you to reinforce and protect your lower control arms from trail damage.

    CNC cut and formed from 3/16" steel.
    Fits 07-16 Jeep Wrangler JK and JKU.
    Works with Dana 44 or Dana 30 front axles.
    Weld on installation.
    Includes JcrOffroad Sticker.
    Hand built in the USA!

    Poison Spyder Crusher Corners for the JK provide ultimate protection for the vulnerable rear corners of your Jeep JK. These Crusher Corners have no taillight provisions whatsoever. They are designed for Do-It-Yourselfers who would like to make up their own taillight configuration, using the taillight style of their own choosing.
    These Crusher Corners are designed to work with high intensity, low-profile, 4" round LED taillights [p/n 41-04-050 (red) or 41-04-051 (clear/red), sold separately] . These LED lights are brighter with less power draw than the OE taillights, and will last longer than the incandescent bulbs. Best of all, they are flush-mounted, barely protruding from the surface of the Crusher Corner, to better survive close encounters with rocks, trees and canyon walls that may knock off the bulky stock taillight housings. These Crusher Corners are designed to work with high intensity, low-profile, 4" round LED taillights Shorty, Steel w/ Recess for LED
    Shorty, Steel w/ Recess for LED
    This is the NEW lightweight rocker guard for the 4 door Jeep JK. It's sleek design is molded to fit the JK's body's shape!
    This is the NEW lightweight rocker guard for the 2 door Jeep JK. It's sleek design is molded to fit the JK's curved body's shape!

    This is a great upgrade for anyone looking for a "functional" step on their JK.
    Poison Spyder JK Evap Skid
    MSRP: $115.50
    Price: $111.00
    Save $4.50!
    The Poison Spyder JK Evap Skid is CNC laser cut and brake-formed from 3/16" plate steel. It completely envelopes the evap canister to protect it from the bottom, front, sides and rear.
    JK Generation II Front and Rear Fenders, OE width, OE-style black texture finish, fits 2007-2016 vehicles

    MADE IN THE USA. Our fenders blend the aggressive, true flatty fender look of the original Jeep to todays JK. Our JK fenders also provide 2inches of extra tire clearance, allowing a larger tire to be installed on the vehicle. (Up to a 35inch tire with no suspension lift) The MCE-spec TPO plastic will not sag or crack, is UV-stable, and flexible enough to absorb an impact on the trail and save your Jeeps body. (A common problem with rigid metal fenders is transferring energy to the Jeeps body, and denting the panel the flare is attached to) Our material is so strong, our fenders have a no fine print LIFETIME warranty to the original buyer against cracking. Cold weather, off-road use, etc. does not affect this warranty. Gen II fenders are black in color with an OE-like surface texture, while the Gen III flares are glossy smooth with a realistic carbon fiber look Flexible Carbon Fiber). The OE inner splash guard/liner is also retained on the front fenders. MCE fenders are easy and painless to install, and all stainless hardware is included.

    NEW All JK Fenders now come with DOT approved LED side marker/clearance lights installed in the side of the fender.
    JK Generation II Front Fenders, OE width, OE-style black OE-style texture finish, fits 2007-2016 vehicles

    MADE IN THE USA. Our fenders blend the aggressive, true flatty fender look of the original Jeep to todays JK. Our JK fenders also provide 2inches of extra tire clearance, allowing a larger tire to be installed on the vehicle. (Up to a 35inch tire with no suspension lift) The MCE-spec TPO plastic will not sag or crack, is UV-stable, and flexible enough to absorb an impact on the trail and save your Jeeps body. (A common problem with rigid metal fenders is transferring energy to the Jeeps body, and denting the panel the flare is attached to) Our material is so strong, our fenders have a no fine print LIFETIME warranty to the original buyer against cracking. Cold weather, off-road use, etc. does not affect this warranty. Gen II fenders are black in color with an OE-like surface texture, while the Gen III flares are glossy smooth with a realistic carbon fiber look Flexible Carbon Fiber). The OE inner splash guard/liner is also retained on the front fenders. MCE fenders are easy and painless to install, and all stainless hardware is included.

    NEW All JK Fenders now come with DOT approved LED side marker/clearance lights installed in the side of the fender.
    JK Generation II Rear Fenders, OE width, OE-style black OE-style texture finish, fits 2007-2016 vehicles

    MADE IN THE USA. Our fenders blend the aggressive, true flatty fender look of the original Jeep to todays JK. Our JK fenders also provide 2inches of extra tire clearance, allowing a larger tire to be installed on the vehicle. (Up to a 35inch tire with no suspension lift) The MCE-spec TPO plastic will not sag or crack, is UV-stable, and flexible enough to absorb an impact on the trail and save your Jeeps body. (A common problem with rigid metal fenders is transferring energy to the Jeeps body, and denting the panel the flare is attached to) Our material is so strong, our fenders have a no fine print LIFETIME warranty to the original buyer against cracking. Cold weather, off-road use, etc. does not affect this warranty. Gen II fenders are black in color with an OE-like surface texture, while the Gen III flares are glossy smooth with a realistic carbon fiber look Flexible Carbon Fiber). The OE inner splash guard/liner is also retained on the front fenders. MCE fenders are easy and painless to install, and all stainless hardware is included.

    NEW All JK Fenders now come with DOT approved LED side marker/clearance lights installed in the side of the fender.

    JcrOffroad is proud to offer an engine skid for your 2007 - 2016, 2 or 4 door JK. Whether you are a rock crawler, mud bogger or just a two-tracker this skid is for you! The skid is designed for maximum coverage, but also is easy on the eyes. These skids are CNC cut and CNC formed in house, here in the US of A! Built from 3/16" plate, our skid is a must have for all JK owners. This skid will fit both the old 3.8L V6 or the new 3.6L Pentastar VVT engines; Rubicon included.

    JcrOffroad products have become renowned for their quality and this skid is no exception! Installation is a simple bolt on application.

    These are the all new GenRight Aluminum Inner Fenders for 2 Door and 4 Door Jeep JK's.

    The one piece design allows for flawless installation, and features a unique mesh vent with a laser cut GR logo to keep your engine compartment cool, and add that "WOW" factor to any JK.

    Features:

    Fits both 2 Door and 4 Door Jeep JK's
    Laser Cut and CNC Bent for a precision fit
    One piece design for an easy install
    Mesh vent to keep engine compartment cool
    Made from 6061-T6 Aluminum for maximum durability and corrosion resistance
    Mounting hardware included
    Made in the USA
    Poison Spyder JK Front Inner Fender Kit - Vented
    MSRP: $350.00
    Price: $320.00
    Save $30.00!
    Poison Spyder JK Front Inner Fender Kit - Vented - Black
    MSRP: $394.90
    Price: $377.00
    Save $17.90!
    Poison Spyder Vented Inner Fenders are the best looking, best functioning aftermarket front inner fenders for your Jeep Wrangler JK.  Poison Spyder JK Vented Inner Fenders dress up the look of your front wheel wells with beautiful CNC laser cut, bead-rolled and brake-formed aluminum panels with stainless steel mesh vented inserts.  The main panels are made of 16 gauge 5052 aluminum, while the vent panels are heavy duty stainless steel wire mesh.  The CNC bead-rolled features look great and give the product a distinctive motorsports flare, but the beads actually help stiffen the product for further strength.  The vented feature helps promote airflow through the engine bay, helping your Jeep run cooler.  These look great with Poison Spyder Crusher Flares, but they're a great addition to any Jeep JK Wrangler, whether it still has the stock flares, aftermarket plastic flares or other manufacturers' metal flares. Poison Spyder Vented Inner Fenders are the best looking, best functioning aftermarket front inner fenders for your Jeep Wrangler JK. Poison Spyder JK Vented Inner Fenders dress up the look of your front wheel wells with beautiful CNC laser cut, bead-rolled and brake-formed aluminum panels with stainless steel mesh vented inserts. The main panels are made of 16 gauge 5052 aluminum, while the vent panels are heavy duty stainless steel wire mesh. The CNC bead-rolled features look great and give the product a distinctive motorsports flare, but the beads actually help stiffen the product for further strength. The vented feature helps promote airflow through the engine bay, helping your Jeep run cooler. These look great with Poison Spyder Crusher Flares, but they're a great addition to any Jeep JK Wrangler, whether it still has the stock flares, aftermarket plastic flares or other manufacturers' metal flares.

    SpyderShell Armor Coat
    These JK Inner Fenders come with Poison Spyder's SpyderShell finish (on the main panels, not the stainless steel mesh vent inserts). SpyderShell is more than just powder coatingit's a complete system that includes the state of the art in preparation, application, materials and packaging to ensure that your SpyderShell products stay looking great for years. The SpyderShell process has been engineered to provide your Poison Spyder product with years of unmatched great looks, corrosion protection and weather-resistance. Our proprietary 6-stage system starts with media blasting the entire part, to remove contaminents and prep the metal surface for the best possible adhesion. Next, any seams are sealed with 3M Scotch-Weld to block moisture from entering and causing corrosion where the powder can not reach. The first coat to be applied is a zinc-rich powdered black primer, which is baked on to form an impenetrable bond between the metal product and the coating. The primer is black--rather than traditional gray--so that any rock chips or trail damage are less conspicuous. The final top coat is an industrial grade, "super-durable" architectural finish in semi-gloss black, which is engineered to retain its appearance through years of exposure to sun and weather. SpyderShell is a coating process unmatched by any other Jeep armor aftermarket manufacturer, for which we are confident in offering a 5-year warranty on materials and workmanship.
    These are the all new GenRight Aluminum Inner Fenders for 2 Door and 4 Door Jeep JK's.

    The one piece design allows for flawless installation, and features a unique mesh vent with a laser cut GR logo to keep your engine compartment cool, and add that "WOW" factor to any JK.

    Features:
    • Fits both 2 Door and 4 Door Jeep JK's
    • Laser Cut and CNC Bent for a precision fit
    • One piece design for an easy install
    • Removable mesh vent to keep engine compartment cool
    • Made from 6061-T6 Aluminum for maximum durability and corrosion resistance
    • Powder Coated Black
    • Mounting hardware included
    • Made in the USA
    Poison Spyder JK TrailGate
    MSRP: $548.90
    Price: $499.00
    Save $49.90!
    Poison Spyder Trail Corners for the JK are a simple addition to protect and enhance one of your Jeep's most vulnerable areas from rock damage. Trail Corners extend from the rear tailgate, around the side, to the top of the wheel opening. They're made of rugged 1/8" steel, die-formed and 5-axis laser cut for a perfect fit to the curves and contours of your JK's body sheet metal, They are finished in our exclusive SpyderShell semi-gloss black coating. JK Trail Corners may be used with the stock JK fender flares or with Poison Spyder's JK Rear Crusher Flares for added rear corner protection. JK Trail Corners come in a complete kit with stainless steel button head hardware. Drilling is required, as is installation of threaded "nut-serts".



    JK UNDER ARMOR 4 Door Bellypan KIT

    Artec Industries' NEW JK UNDER ARMOR is designed to give your 2007 - 2017 Jeep JK Wrangler full protection underneath the vehicle. Designed using CAD files directly from the manufacturer, this belly pan skid plate ensures that you have a great fit with factory components. Made from 1/4" thick 6061 Aluminum and 3/16" Zinc-plated Steel, and CNC cut and formed, the Artec JK Under Armor Kit offers both a strong and lightweight solution for the heavy Jeep JK.

    • 1/4" 6061 Aluminum for skid plates, 3/16" zinc plated steel for bracketry
    • Designed from factory CAD files for great and precise fit.
    • CNC laser cut and CNC formed using custom rolled dies for high strength and a unique look.
    • All bolts under skid plate are countersunk for absolutely smooth bottom*
    • All nuts are pressed into steel brackets for easy, one tool removal
    • Modular design lets you take off only one section for vehicle servicing
    • Protects Oil Pan, Transmission Pan, Gas Tank, Front Exhaust and Transfer Case
    • No removal of gas tank needed, simply bolt in place
    • Works best with Artec JK Heavy Duty Crossmembers*
    • Clearanced near rear drive yoke shaft to prevent rubbing

    Tired of the limited functionality of your Jeep's swing-out tailgate? Do you yearn for the convenience and functionality of the drop-down tailgates from back in the day? Looking to shed a few pounds while gaining a smooth new look for your trail rig? The Poison Spyder TrailGate replaces your Jeep's heavy, cumbersome swing-out tailgate with a lightweight, sleek, aluminum drop-down tailgate.

    The drop-down TrailGate restores classic tailgating functionality to your Jeep. Use it as a convenient seat at outdoor events, or as a lunch prep table for those stops along the trail. It even works great as a temporary work bench for performing those on-site trail repairs. The TrailGates smooth exterior surface gives the back of your Jeep a smooth, clean appearance, which looks great by itself and even better when used in conjunction with a set of Poison Spyder Crusher Corners.

    The gate panel is CNC laser-cut and precision brake-formed from 3/16 inch aluminum plate. The complete TrailGate kit includes CNC machined billet aluminum heavy duty hinges, locking flush-mount latches, limiting cables, brackets, weatherstrips and hardware. The high quality latches are lockable (keys are included) and sit flush when closed to maintain the sleek profile of the TrailGate

    IMPORTANT: The TrailGate does not include provisions for mounting your license plate. In some cases, your license plate may be mounted to your spare tire, if you are running a non-tailgate mounted spare tire carrier. But you can mount the license plate to the TrailGate, by drilling a couple of holes and routing the license plate light wiring (not included but we recommend our LED License Plate & Third Brake Light, sold separately). Another important factor to consider is that the TrailGate eliminates the cabin vent that was located in the stock tailgate. This is inconsequential for topless Jeeps, but if running a full top, it will be necessary to vent the cabin somehow for proper interior climate control. There are a number of DIY solutions to this, including drilling several small vent holes behind the license plate (if it is mounted directly to the TrailGate).

    This all new Laser cut and Puzzled Roll Cage Kit (un-welded) from GenRight Off Road.

    We use the latest Laser Cutting and CNC Tube Bending technology to build this cage from heavy duty 2" diameter DOM tubing and features solid 8-point mounting for maximum protection (unlike other cages on the market).

    This is the best most protective, complete replacement, weld-in (not bolt in) cage available making it the safest cage on the market for a Jeep Wrangler JK.

    All the tubes are cut to length and notched to fit together like a "puzzle." You just need a welder to put it all together.

    Features:
    • Made from 2" diameter heavy duty x .120" wall D.O.M. (Drawn Over Mandrel) seamless tubing.
    • Laser Cut and notched CNC bent tubes, with additional Keying for fool-proof assembly and a precision fit
    • Solid 8-point mounting for maximum safety by adding an additional pillar behind rear seats to protect passengers
    • Designed for maximum visibility with an ultra low profile dash bar
    • Only minor trimming of plastic dash end caps is needed and is not visible when cage is installed
    • Fits under factory hard or soft tops, soft top adapter kit is optional.
    • Can be used with hard (full or half) doors or soft doors.
    • Heavy duty cage to tub mounting brackets are laser cut and formed.
    • Includes bracket mounting kit to accept all the factory seat belts.
    • Includes all necessary mounting hardware (Grade 8)
    • Includes very detailed step by step installation instructions.


    Notes:
    • This kit was designed to be used with all the options (X-bar and V-bar). We strongly urge you to install these bars for the cage to provide it's best protection.
    • This kit is sold un-welded, requiring welding by the end user in the vehicle.
    • This kit requires complete removal of the stock roll bar (and most of the interior for install).
    • After welding the cage, the cage can be removed for powder coating.
    • It is possible to re-fit most of the stock interior plastic (including the sound bar), but it will take some work to trim the plastic nicely.
    • Some trimming of the rear door panel (on factory hard doors) will be necessary to clear B-pillar tubes.
    • Adding a roll cage to a Jeep is not a guarantee of safety. However, this is a substantial upgrade from the factory cage.
    This is the new Laser cut and CNC Mandrel bent cage for the 2 Door JK! GenRight Off Road has a "Puzzled" Roll Cage Kit for the 2 door Jeep Wrangler JK (2007 - Current)!

    This is the best most protective, complete replacement, weld-in cage offered on the market.

    All the tubes are cut to length and notched to fit together like a "puzzle." You just need a MIG or TIG welder to put it all together!

    Features:
    • Designed for maximum visibility with an ultra low profile dash bar
    • Works with factory hard or soft tops.
    • Can be used with hard (full or half) doors or soft doors.
    • Made from 2" diameter heavy wall D.O.M. (Drawn Over Mandrel) seamless tubing.
    • Laser Cut and notched tubes (as pictured)
    • Laser Cut and CNC formed heavy duty cage to tub mounting brackets.
    • Requires minor cutting of the plastic dash end caps.
    • Kit can be shipped to you in three boxes.
    • All the tubes are cut to size and notched to fit together.
    • 6 point mounting for secure protection.
    • Includes everything, as pictured.
    • Optional re-enforcement bars are available (at the dash and behind the seats) for more protection.
    • Includes bracket mounting kit to accept all the factory seat belts.
    • Includes detailed step by step installation instructions.

    Notes:
    • This kit is sold un-welded, requiring welding by the end user.
    • This KIT requires complete removal of the stock roll bar (and most of the interior).
    • After welding, the cage it is possible to remove the cage for powder coating.
    Now taking Pre-Order! 6 weeks until product is available.


    • Recessed Winch Mount
    • Grille-Width For Best Tire Clearance And Articulation
    • Brawler Bar With Tube Gussets
    • Recessed Light Mounts Accept LED Cube Lights
    • Semi-Gloss Black SpyderShell Finish!