Newsletter Signup

Sign up for our newsletter and get the lastest Rebel news!



Official PayPal Seal




Currently viewing: HOME > Wrangler JK 2007-2017 > Electrical
Battery Towing Harnesses Panels
SPOD Switches Wiring Management
Sort By:
Page of 1
Spod Switch Legend - Stickers to Identify Switches
Price: $7.49

White Vinyl Weatherproof with matte laminate coating, solid black background with white lettering. 49 labels per sheet.
Daystar Rocker Switch, Blue
MSRP: $16.99
Price: $12.99
Save $4.00!

Designed for use with Daystar's Switch Panels, these OE-quality rocker switches can handle the switching duties of most aftermarket accessories.
Daystar Rocker Switch, Green
MSRP: $16.99
Price: $12.99
Save $4.00!

Designed for use with Daystar's Switch Panels, these OE-quality rocker switches can handle the switching duties of most aftermarket accessories.
Daystar Rocker Switch, Amber
MSRP: $16.99
Price: $12.99
Save $4.00!

Designed for use with Daystar's Switch Panels, these OE-quality rocker switches can handle the switching duties of most aftermarket accessories.
Daystar Rocker Switch, Red
MSRP: $16.99
Price: $12.99
Save $4.00!

Designed for use with Daystar's Switch Panels, these OE-quality rocker switches can handle the switching duties of most aftermarket accessories.
Daystar Jeep JK Wrangler 07-10 Switch Panel
MSRP: $39.00
Price: $19.99 Guaranteed in stock!
Save $19.01!

This front lower center dash panel will directly replace the existing OE panel allowing you to install 1 to 4 Rocker Switches
Daystar Jeep JK Wrangler 11-12 Switch Panel
MSRP: $39.00
Price: $19.99
Save $19.01!

This front lower center dash panel will directly replace the existing OE panel allowing you to install 1 to 5 Rocker Switches
Daystar Jeep JK Wrangler 07-10 Upper Dash Panel
MSRP: $39.00
Price: $23.99 Guaranteed in stock!
Save $15.01!

This new dash panel will directly replace the existing OE dash panel allowing you a place to hold your cell phone, GPS unit, sunglasses, etc.
Superchips Jeep Wrangler JK 2011-14 FlashCal Programmer
MSRP: $198.75
Price: $159.99 Guaranteed in stock!
Save $38.76!

The Jeep Flashpaq uses the same technology as the best selling Flashpaq performance tuner to deliver extra power to the wheels, exclusive off-road features, and a re-calibration of the Jeep's electronics for tire, axle gear, and transfer case gear changes.
AEV ProCal Module For 07-16 Jeep Wrangler & Wrangler Unlimited JK
Price: $170.00 Guaranteed in stock!

This powerful, yet affordable tool, allows users to recalibrate their vehicle’s computer for a variety of useful benefits.
sPOD Generation II, Bluetooth Remote Control Power Module - RCPM
Price: $174.95

The ultimate upgrade for the ultimate wiring upgrade! Add wireless control to your mobile device for your sPOD unit with just the click of an icon. The Remote Control Power Module (RCPM) installs in under a minute into Generation 2 sPOD units.

Poison Spyder JK LED Tail & Reverse Lights with Wiring Harnesses Kit
Price: $199.99

This complete kit includes everything you need to install 4" round high intensity LED taillights and 2-1/2" round LED reverse lights into the Poison Spyder Crusher Corners on your Jeep JK Wrangler. AT A HUGE SAVINGS over purchasing these items separately! Poison Spyder's JK LED Taillight Harness system is the easy, plug-and-play answer to getting all of your Jeep Wrangler JK's rear LED lighting working quickly and correctly. It is designed to connect directly to your Jeep's OE wiring harness, and directly to LED taillights, back-up lights, and license plate lights sold by Poison Spyder. This kit includes:
• (1) JK LED Taillight Harness - Passenger Side (p/n 41-06-010-P)
• (1) JK LED Taillight Harness - Driver Side (p/n 41-06-010-D)
• (1) 4in LED Back-Up Light Extension Harness (Pair) (p/n 41-06-030)
• (2) 4” 24-LED Taillight Push-In with Pigtail & Grommet - Red (p/n 41-04-050)
• (2) 2-1/2” LED Back-Up Light - Clear (p/n 41-04-300)

Exclusive "Plug-N-Play" Design
Poison Spyder's wiring harness system is designed to take all of the guesswork, hassle and labor out of wiring aftermarket LED taillights, back-up lights and license plate/third brake lights on your 2007 and later Jeep Wrangler JK. The two main harness components, to which the other components connect in order to accommodate your Jeep's customized rear lighting setup. The JK LED Taillight Harness - Driver Side is typically used on the driver's side and does not include provisions for the license plate light. The JK LED Taillight Harness - Passenger Side is typically used on the passenger side, and includes a 6-foot lead and weatherproof connector for our LED License Plate & 3rd Brake Light - PSC Connectors. You will need two of these JK LED Taillight Harnesses, typically one of each type, for most configurations. Each of these Taillight Harnesses plug right into your Jeep's factory wiring harness—simply unplug the stock taillight pigtail and plug the Poison Spyder taillight harness in its place. OEM quality connectors provide a positive, weather-tight connection just like the factory wiring. Weatherproof connectors are used for all other connections as well as automotive quality wires and split-loom protective sheathing. Once the Poison Spyder taillight harnesses are in place, several LED lighting products may be plugged directly into the harness or connected via jumper harnesses.

Supports 4" Round LED Taillights
Both driver and passenger side Poison Spyder taillight harnesses include the correct 3-prong connector to plug directly into the 4" Round, 24-diode LED Stop/Turn/Tail Lights sold by Poison Spyder. Each taillight harness also incorporates a load resistor to simulate the correct power load so turn signals will flash at the correct speed and to keep the vehicle's computer from throwing an error code. No longer must these load resistors be wired in separately with wire taps and butt connectors. NOTE: The LED taillight connector is designed to work with the 4" round LED Taillights sold by Poison Spyder only. It is not guaranteed to fit any other brand or model of taillight.

Supports 2-1/2" Round LED Back-Up Lamps
Both driver and passenger side Poison Spyder taillight harnesses include TWO weather-tight connectors for connecting up to two 2-1/2" Round LED Back-Up Lamps per side, for a total of four such lamps. Typical configurations using Poison Spyder JK Crusher Corners and/or bumpers may include such Back-Up Lamps directly below each LED taillight, in the recessed Back-Up Lamp buckets found on many of our rear bumpers, or both. To connect to Back-Up Lamps located directly below the LED taillights on Poison Spyder JK Crusher Corners, simply use the 4" Back-Up Light Extension Harness on each side. To connect to Back-Up Lamps located in the recessed mounts on many Poison Spyder JK Rear Bumpers, use the 24" Back-Up Light Extension Harness (NOTE: Not included in this kit, must be purchased separately) on each side. Remember, there are two Back-Up Lamp connectors on each taillight harness, in order to accomodate both a 4" and a 24" Back-Up Light Extension Harness on each side simultaneously. Both of these connectors are wired into the vehicle's back-up lamp circuit. If you wish to divert one pair of these lamps to use as manually switched load or work lights, you'll have to research and make the necessary alterations to the harness and the vehicle's wiring on your own. NOTE: The LED Back-Up Lamp Extension Harnesses are designed to work with the 2-1/2" Round LED Back-Up Lamps sold by Poison Spyder only. They are not guaranteed to fit any other brand or model of lamp.

Supports LED License Plate & Third Brake Light
(NOTE: Not included in this kit, must be purchased separately) The passenger side Poison Spyder taillight harness includes a 6-foot lead with weather-tight connector to connect to our LED License Plate & 3rd Brake Light - PSC Connectors. On most Jeep JK's on which Poison Spyder Crusher Corners and LED taillights have been installed, the license plate has been relocated from the stock position on the driver's side corner. In most cases it has been relocated either to the spare tire carrier or to the center of the tailgate on those Jeeps where the spare tire has been removed altogether. In either case, the 6-foot lead on the passenger side LED taillight harness can be routed either through the tailgate or along the tire carrier, and plugged into the LED License Plate & Third Brake Light at the relocated license plate. On those Jeeps where no license plate light is needed or it has already been addressed elsewhere, the lead for the license plate light can be simply coiled up and secured inside the Jeep body's corner cavity, secured with some zip-ties.. NOTE: The license plate lead is designed to work with the LED License Plate & 3rd Brake Light - PSC Connectors sold by Poison Spyder only. It is not guaranteed to fit any other brand or model of license plate light or third brake light.

Installation Guide

Nemesis Dual Battery Tray Optima - Jeep JK 2 / 4 Door - '12-'13
Price: $289.00

As our adventures begin to push us further, we realized the need for a dual battery solution that will not only allow us to operate additional accessories but more importantly give us the reassurance to know that our Jeep will always have the battery power to start. After listening to customers and relying on our own experience we have developed that solution and we’re proud to release it today.
Positioning the Optima batteries vertically our tray provides greater airflow thus increasing battery life and maximizing efficiency. This unique location also allows for greater access to the passenger side of the engine bay, enhancing field serviceability. As with all Nemesis products this is a complete solution. Proper reinforcement has been made to the remaining section of the factory air box and TIPM mount. The EGR valve is mounted in the factory position, and all wiring is protected from heat sources. Should you choose to use the Painless Wiring isolator kit (P/N 40120) we have included mounting provisions on the side of the tray.
The Nemesis Dual Battery Tray is a product developed from years of off-road experience and will provide piece of mind no matter what adventure you choose to take.

**This model is for '12-'13 Jeep JK 2 / 4 Door**
**If you want the dual battery tray for '07-'11 Jeep JKs Click Here**

Nemesis Dual Battery Tray Optima - Jeep JK 2 / 4 Door - '07-'11
Price: $289.00

As our adventures begin to push us further, we realized the need for a dual battery solution that will not only allow us to operate additional accessories but more importantly give us the reassurance to know that our Jeep will always have the battery power to start. After listening to customers and relying on our own experience we have developed that solution and we’re proud to release it today.
Positioning the Optima batteries vertically our tray provides greater airflow thus increasing battery life and maximizing efficiency. This unique location also allows for greater access to the passenger side of the engine bay, enhancing field serviceability. As with all Nemesis products this is a complete solution. Proper reinforcement has been made to the remaining section of the factory air box and TIPM mount. The EGR valve is mounted in the factory position, and all wiring is protected from heat sources. Should you choose to use the Painless Wiring isolator kit (P/N 40120) we have included mounting provisions on the side of the tray.
The Nemesis Dual Battery Tray is a product developed from years of off-road experience and will provide piece of mind no matter what adventure you choose to take.

**This model is for '07-'11 Jeep JK 2 / 4 Door**
**If you want the dual battery tray for '12-'13 Jeep JKs Click Here**

Jeep Wrangler (JK) (2007-2017) 3.6L V6 285 Hp Throttle Response Controller Pedal Commander
Price: $299.99

Pedal Commander Offers Best Driving Experience for Jeep Drivers

System just Controls jeeps throttle response ; System has 4 main programs you can select. And each program has adjustment for intensity 4 and 4-

Eco: Makes your response is 60% more slower than stock. And it is great for economy,and better traction off-road and heavy weather condition.
City: It is 25% better than stock response great for daily driving
Sport: It is 50% better than stock response suggested for spirited driving.
Sport : 95% more responsive than stock it is racing purpose.We do not suggest for daily driving(can cause accident and more fuel consumption)

What is Pedal Commander?

Pedal Commander is a throttle response controller. It removes response delays on your electronic accelerator pedal. Effectively, it allows your engine to respond faster. As a result, your car can accelerate faster. You paid lots of money for your car, but when you press your gas pedal, you feel like you are pressing a sponge. Have you ever noticed that old cars were more responsive?

We have a solution for you!!
Pedal Commander has 4 different control modes:Eco,City, Sport, and Sport . Each control mode has 8 different sensitivity levels which you can choose. These 36 different parameters, in total, is what makes us different than others. Pedal Commander is programmable according to your desire within your car’s specifications.


  • Easy Installation (Plug & Play)
  • OEM Factory Plugs
  • Individual Programming
  • User-Friendly and Adjustable
  • Eco,City,Sport & Sport Modes
  • Removes All Disadvantages of Electronic Gas Pedals
  • CE and TUV Certified
  • Never Voids Your Factory Warranty
  • Excellent Customer Service
  • 100% Satisfaction Guaranteed or 14 Days of Money Back. No Questions Asked!


6 Reasons to Buy Pedal Commander Throttle Controller

  1. 95% Faster Response from Your Engine
  2. 80% User-Friendly
  3. 95% Available for All Car Manufacturers
  4. 80% Individually Adjustable Performance
  5. 100% Great Customer Service
  6. 100% 2-Year Product Warranty


Jeep JK Flashpaq F5 3874 Tuner By Superchips - 3.8L and 3.6L 07-2014 Compatible!
MSRP: $369.95
Price: $349.99 Guaranteed in stock!
Save $19.96!

The Jeep Flashpaq uses the same technology as the best selling Flashpaq performance tuner to deliver extra power to the wheels, exclusive off-road features, and a re-calibration of the Jeep's electronics for tire, axle gear, and transfer case gear changes.
2007 - 2008 JK 6 Switch sPOD & Source System
MSRP: $435.00
Price: $435.00

Each system includes the following:
All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:

  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
Mini Bezel kit for 2007-2008 JK ONLY
Price: $435.00

Compatible with 2007 & 2008 JK Models
Will work in River Raider Off-Road Weld in Sport Cage

Each system includes the following:
All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
2009 - 2015 Jeep JK 6 Switch sPOD & Source System
MSRP: $435.00
Price: $435.00

Each system includes the following:
All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:

  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
2007 - 2008 JK 6 Switch sPOD & Source System w/ Genesis Adapter
MSRP: $455.00
Price: $455.00

This panel includes the new Genesis adapter to allow you to install the Genesis G Screen.
G Screen not included.

Each system includes the following:

All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
2009 - 2015 JK 6 Switch sPOD & Source System w/ Genesis Adapter
Price: $455.00

This panel includes the new Genesis adapter to allow you to install the Genesis G Screen.
G Screen not included.

Each system includes the following:

All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
2007 - 2008 JK 6 Switch w/ Air Gauge sPOD & Source System
MSRP: $460.00
Price: $460.00

Each system includes the following:
All required mounting brackets and hardware. System will come pre-wired ready to install.

Included:
Switch panel, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.
Complete Air Gauge kit 0-200 psi Air Gauge w/Quick Release Camozzi fittings and 10' of high pressure connection line.All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
2009 - 2015 JK 6 Switch w/ Air Gauge sPOD & Source System
MSRP: $460.00
Price: $460.00

Each system includes the following:
All required mounting brackets and hardware. System will come pre-wired ready to install.

Included:
Switch panel, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.
Complete Air Gauge kit 0-200 psi Air Gauge w/Quick Release Camozzi fittings and 10' of high pressure connection line.All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
Genesis Offroad JK Dual Battery Kit
Price: $479.00

This is the most complete and easiest to install dual battery system for the JK Wrangler.

The top cover plate has several innovative features in a simple package. All of the wiring has already been done for you, and the smart isolator comes pre-installed. The welded gussets on top have holes with grommets to route the wires directly to the correct battery post, so there's no guess work involved to make the connections. Use the extra grommets for routing your own accessory wires cleanly and neatly to the power and ground bus bars. High quality battery terminal connectors are crimped to the flexible 2 gauge wire connecting the batteries together. With all the wiring integrated into the top plate, servicing your batteries has never been easier. Simply pull the terminals off the battery posts, remove the 4 easily accessible bolts securing the lid, and all the wiring can be lifted up and out of the way to service your batteries when necessary.

The included smart isolator gives you automatic control of all the charging functions with no interaction required.

Here's how it works.

When both your batteries are fully charged at 13.2 volts, they are automatically connected and are charged at the same time.
When you park and turn off the engine, but continue to use accessories such as lights or the stereo or a CB, both batteries begin to drain down.
When your main cranking battery reaches 12.7 volts, the smart isolator separates the batteries, so that your cranking battery will have enough power to start the engine. The second battery continues to power your accessories for as long as it will last.
After you crank the vehicle, your main cranking battery will be charged up to 13.2 volts first, and then the isolator will begin charging your accessory battery. By only charging one battery at a time, your alternator is protected from excessive strain.
What if your cranking battery is somehow drained down too low to be able to start the vehicle? We have a solution for that.

Press the Start Boost button and the isolator will connect both batteries together for 1 minute, acting like built-in jumper cables to jump start your engine off your accessory battery.
As long as the combined voltage of the 2 batteries is at least 12.7 volts, you'll be able to start your vehicle instead of being stranded with a dead battery!
The alternator will charge both batteries for 1 minute, then switches back over to automatic mode to reduce the strain on your alternator.

Also includes high amp power AND ground bus bars. The bus bars are already pre-wired to the accessory battery. Now you can quickly and easily connect your winch, lights, amplifiers, and lots more while keeping the wiring neat and orderly. Your winch or other high-amp accessories go onto the large center post on the bus bars, and all your other accessories go directly to the smaller screw terminals on the bus bars.

NOTE: 2007-2011 model years require a short extention cable for the evap solenoid. The extension is made with OEM connectors and wires to ensure a perfect watertight fit for easy installation. This piece is not required on 2012+ JKs. Be sure to specify your year model when ordering.

Battery Options:
Any Group 34 battery will fit our tray
For your convenience, you can select from the Optima Red Top or Yellow Top, or the Odyssey PC1500 from the menu above to have the correct battery drop shipped to your door for less than you'll pay at the store with sales tax
NOTE: Batteries ordered through Genesis Offroad will ship seperately from the tray due to shipping regulations.
Optima Red Top is a good engine starting battery, but not recommended or warranted for use in deep cycle applications. 800 CCA, 50 Ah capacity, 100 minute reserve time
Optima Yellow Top is a good high power, dual purpose engine start and deep cycle battery. 750 CCA, 55 Ah capacity, 120 minute reserve time
Odyssey 34-PC1500T is for those who need the most capacity possible! 850 CCA, 68 Ah, and 135 reserve time
The original factory battery will not fit due to its larger size
Both batteries must be the same physical size for the top lid to securely hold them in place

Isolator Option:
Technically speaking, the isolator rating should match the alternator output rating. In real world application, the actual output of the alternator is much lower than the published rating, so the 85 amp isolator is plenty sufficient for most Jeep owners. Some Jeep owners like to do everything overkill just for peace of mind, so there's no downside to going with the upgraded version.
Standard 85 amp - suitable for most general purpose uses, including Jeeps with a winch, lights, CB, etc.
Upgraded 200 amp - highly recommended for Jeeps with multiple high amp draw accessories such as big stereo systems or lots of electrical components. Required if using an aftermarket high output alternator.

Completely pre-wired out of the box:
Fits 3.8L, 3.6L, Hemi 5.7L & 6.4L, and European diesel engines
Boost switch included - jump start your vehicle off your second battery
Power & Ground bus bars make it easy to connect accessories
Smart Isolator automatically handles all charging functions
NEW FEATURE! Interface port pre-wired for the G Screen monitoring system
Integrated fuse box holder and evap solenoid holder
Best quality wires, soldered and crimped connectors, sealed heat shrink tubing
Powder coated for durability
Lifetime Warranty on all components
Proudly made in the USA

GENESIS OFF-ROAD Right Hand Drive JK Dual Battery Kit
Price: $479.00

This kit fits the RIGHT HAND DRIVE (RHD) gas engine Jeep Wrangler only.

This is the most complete and easiest to install dual battery system for the JK Wrangler.

Completely pre-wired out of the box
Boost switch included - jump start your vehicle off your second battery
Power & Ground bus bars make it easy to connect accessories
Smart Isolator automatically handles all charging functions
NEW FEATURE! Interface port pre-wired for the G Screen monitoring system
Integrated fuse box holder and evap solenoid holder
Best quality wires, soldered and crimped connectors, sealed heat shrink tubing
Powder coated for durability
Lifetime Warranty on all components
Proudly made in the USA


Switch Pros SP-8100 8-Switch Panel Power System
Price: $479.00

Product Description:

  • Eight user-programmable switches
  • User-selectable switch legends
  • Illuminated switches with user-adjustable brightness
  • Programming and control via panel or smart phone
  • Bluetooth interface
  • 100A solid state power module, engine compartment rated
  • Automatic shutdown for overcurrent and low voltage
  • Programming options are: On/Off or Momentary, Ign. or Batt., Flash and Strobe functions, Low Voltage Disconnect, and Switch Memory
  • Plug and play installation
Switch Panel Specs:
  • 4”L x 2”W x .5”H (excluding tabs)
  • Enclosure: Anodized Aluminum
  • Orange LED switch indicators
  • Green backlighting
  • 4’ interface cable
Power Module Specs:
  • 6”L x 3”W x .5”H (excluding connectors)
  • Enclosure: Anodized aluminum
  • 8 Outputs, 7 rated @ 18A, 1 rated @ 30A
  • 100A maximum rating 125°C to -40°C
  • 16-pin, sealed automotive connector, wire harness w/100A fused power cable, light, and ignition input wires, and eight 3’long output wires
Switches can be programmed to be: On/Off or Momentary, ignition or battery powered, flash, strobe, low voltage disconnect, and memorize previous settings. There is also a programming function to adjust the brightness of backlighting and indicator LEDs.
2012 - 2015 JK model 6 Switch System with double LED light Contura rocker switches & Source System
Price: $520.00

Each system includes the following:
All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Double light LED Contura switches (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers

Highlights of the dual LED option:

  • Gives the operator a choice of having a night lighted switch.
  • The lower lighted portion of the switch is fully controlled by the operator.
  • Prevents from tapping into the OEM electrics.
  • Choices of switch LED colors Red, Green, Blue and Amber.
  • No extra wiring required by the installer or customer.
  • The upper light still lights up only when the switch is in the on position.
  • LED's are much dimmer and less distracting
  • LED's draw much less current
  • LED's have a much longer life span than incandescent lights.
2007 - 2008 JK model 6 Switch System with double LED light Contura rocker switches sPOD & Source System
MSRP: $520.00
Price: $520.00

Each system includes the following:
All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Double light LED Contura switches (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers

Highlights of the dual LED option:

  • Gives the operator a choice of having a night lighted switch.
  • The lower lighted portion of the switch is fully controlled by the operator.
  • Prevents from tapping into the OEM electrics.
  • Choices of switch LED colors Red, Green, Blue and Amber.
  • No extra wiring required by the installer or customer.
  • The upper light still lights up only when the switch is in the on position.
  • LED's are much dimmer and less distracting
  • LED's draw much less current
  • LED's have a much longer life span than incandescent lights.
2007 -2008 JK 6 Switch sPOD w/ 2-1/16" Dia. Gauge hole
MSRP: $520.00
Price: $520.00



This panel does not include the new Genesis adapter to allow you to install the Genesis G Screen.
G Screen not included.

Each system includes the following:

All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six dual 24v LED Contura rocker switches and push button to turn bottom lights on and off (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
2009 - 2015 JK 6 Switch Dual LED sPOD & Source System
MSRP: $520.00
Price: $520.00

This panel does not include the new Genesis adapter to allow you to install the Genesis G Screen.
G Screen not included.

Each system includes the following:

All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six dual 24v LED Contura rocker switches and push button to turn bottom lights on and off (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
2009 -2015 JK 6 Switch Dual LED sPOD w/2-1/16" Dia. Gauge hole - Aeroforce Gauge Not included
MSRP: $520.00
Price: $520.00

This panel does not include the new Genesis adapter to allow you to install the Genesis G Screen.
G Screen not included.

Each system includes the following:

All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six dual 24v LED Contura rocker switches and push button to turn bottom lights on and off (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
2007 - 2008 w/Genesis Adapter and Double LED switches sPOD & Source System
MSRP: $535.00
Price: $535.00

This panel includes the new Genesis adapter to allow you to install the Genesis G Screen.
G Screen not included.

Each system includes the following:

All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six dual 24v LED Contura rocker switches and push button to turn bottom lights on and off (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
2009 - 2015 w/Genesis Adapter and Double LED switches sPOD & Source System
MSRP: $535.00
Price: $535.00

This panel includes the new Genesis adapter to allow you to install the Genesis G Screen.
G Screen not included.

Each system includes the following:

All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six dual 24v LED Contura rocker switches and push button to turn bottom lights on and off (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
2012 - 2015 JK 6 Switch System with air gauge with double LED light Contura rocker switches & Source System
Price: $545.00

Each system includes the following:
All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Double light LED Contura switches (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers

Highlights of the dual LED option:

  • Gives the operator a choice of having a night lighted switch.
  • The lower lighted portion of the switch is fully controlled by the operator.
  • Prevents from tapping into the OEM electrics.
  • Choices of switch LED colors Red, Green, Blue and Amber.
  • No extra wiring required by the installer or customer.
  • The upper light still lights up only when the switch is in the on position.
  • LED's are much dimmer and less distracting
  • LED's draw much less current
  • LED's have a much longer life span than incandescent lights.
2007 - 2008 JK 6 Switch w/ Air Gauge and Dual LED switches sPOD & Source System
MSRP: $545.00
Price: $545.00

Each system includes the following:
All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Double light LED Contura switches (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers

Highlights of the dual LED option:

  • Gives the operator a choice of having a night lighted switch.
  • The lower lighted portion of the switch is fully controlled by the operator.
  • Prevents from tapping into the OEM electrics.
  • Choices of switch LED colors Red, Green, Blue and Amber.
  • No extra wiring required by the installer or customer.
  • The upper light still lights up only when the switch is in the on position.
  • LED's are much dimmer and less distracting
  • LED's draw much less current
  • LED's have a much longer life span than incandescent lights.
2009 - 2015 JK 6 Switch w/ Air Gauge and Double LED switches sPOD & Source System
MSRP: $545.00
Price: $545.00

Each system includes the following:
All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Double light LED Contura switches (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers

Highlights of the dual LED option:

  • Gives the operator a choice of having a night lighted switch.
  • The lower lighted portion of the switch is fully controlled by the operator.
  • Prevents from tapping into the OEM electrics.
  • Choices of switch LED colors Red, Green, Blue and Amber.
  • No extra wiring required by the installer or customer.
  • The upper light still lights up only when the switch is in the on position.
  • LED's are much dimmer and less distracting
  • LED's draw much less current
  • LED's have a much longer life span than incandescent lights.