Currently viewing: HOME > Cherokee XJ 1984-2001
Sort By:
Page of 4
Spod Switch Legend - Stickers to Identify Switches TJ/LJ Dana 44/60 Front Axle Shock Mount - Driver	Threaded Insert 7/8" x 18TPI For 1.125" ID Tube - Left Hand Thread
TJ/LJ Dana 44/60 Front Axle Shock Mount - Driver
MSRP: $15.99
Price: $15.19
Save $0.80!
White Vinyl Weatherproof with matte laminate coating, solid black background with white lettering. 49 labels per sheet. The TeraFlex TJ front axle bracket driver shock mount is precision laser cut from 3/16 steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one shock mount and is designed for Dana 44 or Dana 60 axles with 3" diameter axle tube. Welding is required. The TeraFlex threaded insert sleeves make custom link building simple and easy. Weldable inserts are available to fit our large (1-1/4 12 tpi.), or small (7/8 18 tpi.) Monster ends. The large inserts require a minimum of 1.5 ID tubing and the medium/small inserts require a minimum of 1-1/8 ID tubing. Sold individually.
Threaded Insert 7/8" x 18TPI For 1.125" ID Tube - Right Hand Thread TJ/LJ Dana 44/60 Front Axle Shock Mount - Passenger Front Sway Bar Quick Disconnect 3/4” Lower Stud Kit (w/ Hitch Pin Clip, Lock Nut, & Washers)
TJ/LJ Dana 44/60 Front Axle Shock Mount - Passenger
MSRP: $16.99
Price: $16.14
Save $0.85!
The TeraFlex threaded insert sleeves make custom link building simple and easy. Weldable inserts are available to fit our large (1-1/4 12 tpi.), or small (7/8 18 tpi.) Monster ends. The large inserts require a minimum of 1.5 ID tubing and the medium/small inserts require a minimum of 1-1/8 ID tubing. Sold individually. The TeraFlex TJ front axle bracket passenger shock mount is precision laser cut from 3/16 steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one shock mount and is designed for Dana 44 or Dana 60 axles with 3" diameter axle tube. Welding is required. The replacement swaybar quick disconnect lower stud kit gives you the lower link components required to replace missing or worn components. This kit includes lower quick disconnect stud, hitch pin clip, large pin retainer washer, flat washer and lock nut.
Threaded Insert 1.25" x 12TPI For 1.5" ID Tube - Left Hand Thread Threaded Insert 1.25" x 12TPI For 1.5" ID Tube - Right Hand Thread TJ/LJ | ZJ | XJ Front Lower Shock Bar Pin Eliminator Kit
TJ/LJ | ZJ | XJ Front Lower Shock Bar Pin Eliminator Kit
MSRP: $27.99
Price: $26.59
Save $1.40!
The TeraFlex threaded insert sleeves make custom link building simple and easy. Weldable inserts are available to fit our large (1-1/4 12 tpi.), or small (7/8 18 tpi.) Monster ends. The large inserts require a minimum of 1.5 ID tubing and the medium/small inserts require a minimum of 1-1/8 ID tubing. Sold individually. The TeraFlex threaded insert sleeves make custom link building simple and easy. Weldable inserts are available to fit our large (1-1/4 12 tpi.), or small (7/8 18 tpi.) Monster ends. The large inserts require a minimum of 1.5 ID tubing and the medium/small inserts require a minimum of 1-1/8 ID tubing. Sold individually. The TJ front lower shock bar pin eliminator kit increases your shock options by eliminating the need for a bar pin. Bar pins have the tendency to become loose and allow the shock eyelet to move side to side reducing shock effectiveness. The bar pin eliminator converts the shock to a traditional captured shock mount - and you can now forget about replacing broken bar pins. The eliminator kit installs in the place of the factory bar pin and includes adapter brackets, shock sleeves, and all necessary hardware. Fits all TJ Wranglers, and can also fit XJ Cherokees, and ZJ Grand Cherokees. Note: This part can change the length requirements of the shock by as much as one inch.
TJ/LJ | ZJ | XJ Rear Upper Shock Bar Pin Eliminator Kit TJ/LJ | ZJ | XJ Front Upper Shock Stem Eliminator Kit Synergy MFG Universal Weld-On 2.0" Reservoir Mount (Pair)
TJ/LJ | ZJ | XJ Rear Upper Shock Bar Pin Eliminator Kit
MSRP: $27.99
Price: $26.59
Save $1.40!
TJ/LJ | ZJ | XJ Front Upper Shock Stem Eliminator Kit
MSRP: $30.99
Price: $29.44
Save $1.55!
The TJ rear upper shock bar pin eliminator kit increases your shock options by eliminating the need for a bar pin. Bar pins have the tendency to become loose and allow the shock eyelet to move side to side reducing shock effectiveness. The bar pin eliminator converts the shock to a traditional captured shock mount - and you can now forget about replacing broken bar pins. The eliminator kit installs in the place of the factory bar pin and includes adapter brackets, shock sleeves, and all necessary hardware. Fits all TJ Wranglers, and can also fit XJ Cherokees. Note: This part can change the length requirements of the shock by as much as one inch. The TJ front upper shock stem eliminator kit converts the front upper shock mount from a stem-loop to a loop-loop shock, making possible the use of a wider range of shocks and lengths. This kit installs in the place of the factory shock stem with an adapter bracket and all necessary hardware. Fits all TJ Wranglers, XJ Cherokees, and ZJ Grand Cherokees. Note: This part can change the length requirements of the shock by as much as one inch. Synergy Suspension Universal Weld-On 2.0" Reservoir Mount (Pair)
VIAIR Illuminated Dash Panel Gauge Kit (20 Amp) XJ Cherokee 0.5” Transfer Case Spacer Lowering Kit TeraFlex Large Weld-On FlexArm Eyelet Joint
VIAIR Illuminated Dash Panel Gauge Kit (20 Amp)
MSRP: $42.00
Price: $31.50
Save $10.50!
XJ Cherokee 0.5 Transfer Case Spacer Lowering Kit
MSRP: $33.99
Price: $32.29
Save $1.70!
TeraFlex Large Weld-On FlexArm Eyelet Joint
MSRP: $38.99
Price: $37.04
Save $1.95!
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other productive harm. The TeraFlex XJ transfer case lowering kit lowers the transfer case 1/2" to reduce driveshaft vibration caused by increased ride height in excess of two inches. This is especially useful for Jeeps that have not installed a slipe yoke eliminator kit. This kit includes 6 lowering spacers and all necessary hardware. Note: shift linkage adjustment may be necessary. The TeraFlex weld-on eyelet joint provides excellent off-road capabilities with articulation and durability. It damps a fair amount of road noise and vibration. This end is designed to be used in custom control arm applications, and will require welding. Uses a 9/16 bolt.
JCR Offroad Jeep Winch Fairlead Lightbar Bracket - 10" or 12" LED Light Bar - LTMT-LE JCR Offroad Jeep Winch Fairlead Lightbar Bracket - LTMT-DL TJ/LJ Dana 44/60 - Front/Rear Axle Lower Flexarm Mount - Driver

13.325" center between slotted mounting holes. Works with our 10" bars, may work with other 12" bars with the mounts flipped. Comes unfinished.

8.5" between light holes. Comes unfinished, works with hawse fairleads only.

Fits hawase fairleads that protrude 2.5" above their mounting hole center line. (See photos.)

The TeraFlex TJ front axle bracket driver lower FlexArm mount is precision laser cut from 3/16 steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one lower FlexArm mount and is designed for Dana 44 or Dana 60 axles with 3" diameter axle tube. Welding is required.
TJ/LJ Dana 44/60 - Front/Rear Axle Lower Flexarm Mount - Passenger TJ (LH & RH) / 1997-2001 XJ (LH) Emergency Brake Cable (41-1/2”) - Each YJ 91-95 RH / XJ 84-96 LH & RH Emergency Brake Cable
YJ 91-95 RH / XJ 84-96 LH & RH Emergency Brake Cable
MSRP: $52.99
Price: $50.34
Save $2.65!
The TeraFlex TJ front axle bracket passenger lower FlexArm mount is precision laser cut from 3/16 steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one lower FlexArm mount and is designed for Dana 44 or Dana 60 axles with 3" diameter axle tube. Welding is required.
YJ 87-90 LH Emergency Brake Cable XJ 97-01 RH Emergency Brake Cable TJ/LJ High Steer Front Driver Sway Bar Mount
YJ 87-90 LH Emergency Brake Cable
MSRP: $52.99
Price: $50.34
Save $2.65!
XJ 97-01 RH Emergency Brake Cable
MSRP: $52.99
Price: $50.34
Save $2.65!
TJ/LJ High Steer Front Driver Sway Bar Mount
MSRP: $56.99
Price: $54.14
Save $2.85!
TJ/LJ High Steer Front Passenger Sway Bar Mount 9.5" FlexArm Tube TJ/LJ Dana 44/60 Front Axle Upper Flexarm Mount - Passenger
TJ/LJ High Steer Front Passenger Sway Bar Mount
MSRP: $56.99
Price: $54.14
Save $2.85!
9.5" FlexArm Tube
MSRP: $72.99
Price: $69.34
Save $3.65!
TeraFlex offers standard lengths of FlexArm tubing pre-tapped for our large Monster ends (1.25x12tpi). These can be used for custom suspension links or torque arms. The DOM tubing is 1.75 OD and .281 wall for superior strength to meet the needs of high power and torque applications. Tube length is measured as the actual length of tube. The TeraFlex TJ front axle bracket passenger upper FlexArm mount is precision laser cut from 3/16 steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one upper FlexArm mount and is designed for Dana 44 or Dana 60 axles with 3" diameter axle tube. Welding is required.
TeraFlex 14" FlexArm Tube C SERIES C3 LED FLUSH MOUNT SPOT BEAM - KC HiLiTES Dana 30 HD Differential Cover Kit - 3990630
TeraFlex 14" FlexArm Tube
MSRP: $88.99
Price: $84.54
Save $4.45!
Dana 30 HD Differential Cover Kit - 3990630
MSRP: $99.99
Price: $94.99
Save $5.00!
TeraFlex offers standard lengths of FlexArm tubing pre-tapped for our large Monster ends (1.25x12tpi). These can be used for custom suspension links or torque arms. The DOM tubing is 1.75 OD and .281 wall for superior strength to meet the needs of high power and torque applications. Tube length is measured as the actual length of tube. 3" C3 LED flush mount light provides infinite mounting options for the C3 LED light through a mounting plate cover. Flush mount C3 LED lights are sold individually.

Flush Mount LED
LED: 3w x4 - Total 12w
Output: 1,080 Lumens
Beam Pattern: 12 Spot
Color Temp: 6000K
LED Life: 50,000 Hrs
Housing: Die-Cast Aluminum
On-Board Thermal Management
Protected Against RFI / EMC Interference
IP 67 Rated
KC #1331
TeraFlex heavy duty differential covers are designed to offer extreme protection from rocks, obstacles and other debris on the trail. The cover is cast from the same high-strength ductile-iron as our HD axle housings. The cover is over 3/8" thick to ensure protection.