Currently viewing: HOME > Wrangler JK 2007-2018 > Body and Frame
Covers / Vehicle / Cab Fuel Doors Grilles
Headlight /Taillight Bezels Hoods / Hood Accessories Mirrors
Sort By:
Page of 1
Daystar 07-10 JK Wrangler Hood Latch Poison Spyder Jeep JK License Plate Delete AEV JK Heat Reduction Hood
Daystar 07-10 JK Wrangler Hood Latch
MSRP: $32.00
Price: $28.99
Save $3.01!
Poison Spyder Jeep JK License Plate Delete
MSRP: $13.20
Price: $12.99
Save $0.21!
The hood on the JK has a large amount of wiggle room so, unfortunately, when you start traveling at higher speeds the increased wind can make your hood rattle. Jeep JK Rear License Plate Delete Cover for those relocating the license plate from its stock mount. AEV all steel Heat Reduction Hood provides both fresh intake air and critical cooling for the new Wrangler. This hood's special design is not only functional, but sets your vehicle apart from the rest with aggressive styling.
JK/JKU Epic Front Bumper w/out Hoop - Offset Drum Winch JKU 4-Door Third-Row Seat Bracket Kit Jeep Wrangler JK Drake Off Road Hood Hold Downs
Jeep Wrangler JK Drake Off Road Hood Hold Downs
MSRP: $129.99
Price: $124.95
Save $5.04!
The TeraFlex RockGuard Epic front bumper for the JK Wrangler is designed to offer ultimate rock protection, and match the refined design styling of the vehicle’s body. The TeraFlex 3rd Seat Bracket Kit is an innovative seat bracket kit that allows JK Unlimited owners the ability to add a 3rd row seat for additional seating. Replace your boring rubber hood hold downs with these race inspired Drake Off Road hood hold downs, featuring a billet aluminum turnbuckle and stainless steel heim joints. Our quick release push pin gives you easy access to opening your hood and won't be lost thanks to our attached stainless steel lanyard.
JK/JKU CB Antenna Mount Kit - Boxed Off Road Antenna for Jeep Wrangler JK 1997-2018 - Black 13" Rubber Poison Spyder JK Hood Louver 2007-2012
JK/JKU CB Antenna Mount Kit - Boxed
Price: $26.99 Guaranteed in stock!
Off Road Antenna for Jeep Wrangler JK 1997-2018 - Black 13" Rubber
MSRP: $24.95
Price: $19.99 Guaranteed in stock!
Save $4.96!
Poison Spyder JK Hood Louver 2007-2012
MSRP: $141.90
Price: $137.99
Save $3.91!
Easily mount a CB antenna to your JK Wrangler. Replace your ugly factory (31 inch) metal shaft antenna with this stylish yet functional LOW PROFILE (13 inch) flexible rubber antenna that will not hit the GARAGE DOOR anymore!!! If you are unsure that it fits, try unscrewing the existing antenna mast off. If it twists right off, then this antenna WILL FIT since it COMES WITH VEHICLE SPECIFIC ADAPTERS (no two antennas are the same fit). In addition to improved cooling performance, Poison Spyder Hood Louvers add great looks to your Jeep!
Trailgater Bolt-on Tailgate Table for Jeep JK 2007-2018 JK/JKU Alpha HD Adjustable Spare Tire Mounting Kit - 5x5 JK/JKU Alpha HD Hinged Spare Tire Carrier & Alpha HD Adjustable Spare Tire Mounting Kit - Complete
The Trailgater is engineered specifically for the 2007-2018 Jeep JK Wrangler and JK Wrangler Unlimited. It is designed to be extremely functional, ergonomic and to look fantastic on your Jeep JK. The TeraFlex Heavy Duty Adjustable Tire Carrier spreads the load and weight of the tire to more than just one hinge point. Incorporating and using the factory tailgate hinge mounting points spread and separate the load as far apart as possible, resulting in maximum strength and durability. The TeraFlex Heavy Duty Adjustable Tire Carrier & Tailgate Reinforcement Kit is designed to carry up to a 37" tire over the most extreme trails and obstacles, and provide easy and immediate access to the rear cargo area with a single action.
JK/JKU 1.25" Body Lift Kit 2007-2015 Jeep Wrangler JK TOTL Innovations Heat Expulsion Hood Poison Spyder JK Hood Louver '13+ - 17-53-011
Poison Spyder JK Hood Louver '13+ - 17-53-011
MSRP: $141.90
Price: $136.00
Save $5.90!
Free Shipping for a Limited Time!

The TeraFlex 1.25" body lift kit is perfect for the budget-minded enthusiast looking for a simple lift to run 33" tires, or it can be combined with a suspension lift kit to gain additional clearance. The body lift spacers are molded from UHMW polyethylene for premium longevity and corrosion resistance. Includes all needed hardware, including new large washers.

This kit was designed with ease of install in mind; no grinding, cutting, or re purposing of factory hardware is needed. Grill removal is not required.

NOTE: This kit is designed for Automatic transmissions. Manual transmission equipped JKs will require shifter boot trimming for proper installation.
This hood uses two sets of fully functional vents to expel the maximum amount of heat to reduce under hood temperatures. The two vents on the side of the hood are strategically placed to give heat being pushed back towards the firewall a way to exit the engine bay when the JK is traveling at speed while a second set of vents running the full length of the hood on each side of the cowl expel rising heat from the entire engine bay when the JK is traveling at slower speeds. In addition to improved cooling performance, Poison Spyder Hood Louvers add great looks to your Jeep!
30" C SERIES C30 LED BAR & HOOD MOUNT BRACKET KIT - JEEP JK 07-14 - KC HiLiTES LED TRUCK GRILLE - 2007-14 JEEP WRANGLER JK - KC HiLiTES 2007 - 2013 JEEP JK STEALTH FIGHTER FRONT BUMPER CENTER W/TOW HOOKS
30" C Series C30 LED Light Bar & Hood Mount Bracket Lighting Kit for Jeep JK 2007-2014. This lighting kit comes with both the 30" C Series LED Light Bar and the Hood Mount Bracket to provide a turn key lighting solution that's easy to install and ready to go.

30" C SERIES C30 LED BAR & HOOD MOUNT BRACKET KIT - JEEP JK 07-14 - KC #367
Light Bar
LED: 3w x60
Total Wattage: 180w
Output: 11,760 Lumens
Beam Pattern: 12* Spot / 30* Spread
Color Temp: 6000K
LED Life: 50,000 Hrs
Housing: Extruded Aluminum
On-Board Thermal Management
Protected Against RFI / EMC Interference
Waterproof Connecters
IP 67 Rated
KC #336 - Single Light w/ Wiring Harness
Light Bracket Kit:
Black Powder Coated Steel
Easily Mounts to Factory Bolt Locations
Made in the USA
LED Truck Grille - 2007-14 Jeep Wrangler JK - KC

KC LED Truck Grilles combine great styling with a powerful C-Series LED light bar in one convenient kit. This 2007-2014 Jeep Wrangler JK replacement grille is engineered to mount in the OEM location with supplied premium quality hardware. Please Note: Cutting and removing a portion of your original grille is required. The C-Series light bar fits precisely into the grille while allowing optimal beam aiming.

- Stylish mesh design with solid outer frame for sturdy durability
- Precision laser cut and sanded for a superior fit and finish
- Deep satin black two stage powder-coat finish with gloss black KC logo
- Secures into OEM mounting location and includes all necessary hardware
- Includes a 10" C-Series LED light bar complete with wiring harness and switch
The Jeep JK Flexible Bumper System, allows you to create a bumper that suits your lifestyle, whether it be Rock Crawling, Mall Crawling or Desert Romping. See all of the available Top Hoops and Side Caps.
2007 - 2013 Jeep JK Stealth Fighter Front Bumper Center w/Tow Hooks and Flush Mount holes for LED Lights. Fits up to a 12k lb. winch, comes with standard flat ends and bolts directly to the frame without any interference to airbag sensors. Tow Hooks allow for ease of towing, as well as recovery.
Features:
.120" Wall Steel Tube Construction
Laser Cut Skid plates, Tabs and Plates for a Precise Fit
Direct fit - No Cutting or Welding required
Stainless Steel Hardware
**2013 and Newer models require the vacuum pump to be relocated**
**Winch Plate Limit is 10,500 lbs., use only winches at or under this approved pull rate to retain Bumper Warranty.
2007 - 2018 JEEP JK STEALTH FIGHTER REAR BUMPER 2007 - 2013 JEEP TIRE CARRIER 2007 - 2013 JEEP JK STEALTH FIGHTER SIDE STEPS - 2 DOOR
The A.D.D. Stealth Fighter Rear Bumper is a mix of style, function and flexibility. Designed to compliment our entire line of Stealth Fighter Products, it is engineered for strength and durability, plus with the many options available it is flexible enough to make it your own!
Flexible option include Choice of Powdercoating, With or Without cutout for tow hitch and your choice of adding light mounts for Rigid Flush Mount Dual/D2's
Features:
  • 3/16" and 1/8" Plate used to strengthen and reduce weight
  • Laser Cut Skid plates, Tabs and Plates for a Precise Fit
  • Direct fit - No Cutting or Welding required
The Stealth Fighter Heavy Duty Tire Carrier is a great option for the Stealth Fighter Rear Bumper. Direct bolt on unit with one hand rear door opening action and capable of holding a 37" Rear Tire. The hinge design takes the weight off the tailgate, but still operates as easily as from the factory. Add in a mount for Daystar Cam-Cans and the unit is complete.
The New A.D.D. Offroad Stealth Fighter Side Steps/Rock Sliders are designed with function in mind. Beefy enough to provide protection in the most extreme conditions, yet many flexible lighting options to fit all of your rock lights.
Manufactured from 3/16" plate and gusseted slong the entire body, these are the toughest sliders on the market.
These Steps come with mounts for Rigid Industries 6" SR, A-Series and KC Cyclone LED Lights. Up to 3 - 6" SR's and 3 - A-Series or Cyclones can be added per side!
Features:
3/16" Steel structure
Laser Cut Skid plates, Tabs and Plates for a Precise Fit
Direct fit - No Cutting or Welding required
Stainless Steel Hardware
JK/JKU Stock 3rd Brake Light Extension Bracket Kit JK/JKU | TJ/LJ Spare Tire Relocation Bracket Kit - Boxed JK/JKU | TJ/LJ Spare Tire Relocation Bracket Kit - Skin Pack
This simple extension allows you to retain the factory brake light. Simply cut the factory bracket, and bolt on the extension piece.
The JK / TJ spare tire extension kit allows you to carry a larger spare tire/aftermarket wheel by extending the position of the spare tire mount away from the vehicle. This kit is not recommended for tires larger than 33 inches. The improved design features gussets for superior strength. Fits all JK and TJ Wrangler models including Rubicon and Unlimited. The JK / TJ spare tire extension kit allows you to carry a larger spare tire/aftermarket wheel by extending the position of the spare tire mount away from the vehicle. This kit is not recommended for tires larger than 33 inches. The improved design features gussets for superior strength. Fits all JK and TJ Wrangler models including Rubicon and Unlimited. Sold in skin packaging for retail point of sale.
2012-2018 JK/JKU Vacuum Pump Relocation Bracket Kit TeraFlex JK 2 Door Rock Slider Kit JKU 4-Door Aluminum Rock Slider Kit - Powder Coat
JK/JKU Explorer Front Bumper Winch Plate Kit JK/JKU Explorer Front Bumper w/out Hoop JK/JKU Epic Front Bumper w/out Hoop - Centered Drum Winch
JK/JKU Outback Rear Bumper w/out OEM Fog Light Mounts JK/JKU Outback Rear Bumper w/ OEM Fog Light Mounts JK/JKU Alpha License Plate & 3rd Brake Light Mount Kit w/ Lug Nuts
JK/JKU Alpha License Plate & 3rd Brake Light Mount Kit w/out Lug Nuts JK/JKU Alpha HD Hinged Spare Tire Carrier CB Antenna Mount - Skin Pack JK/JKU Alpha HD Adjustable Spare Tire Mounting Kit - 5x5.5"
Designed to accommodate up to a 35" tire (up to a 37" tire when used with the Alpha Heavy-Duty Hinged Spare Tire Carrier), the TeraFlex JK/JKU Alpha Heavy-Duty Adjustable Spare Tire Mounting Kit will secure your spare tire over the most extreme trails and rugged terrain.
TeraFlex JK 2 Door Rock Slider Kit - No Powdercoat JKU 4-Door Aluminum Rock Slider Kit - Raw JK/JKU CB Antenna Mount Kit - Skin Packed
JK/JKU CB Antenna Mount Kit Stainless - Skin Packed JK/JKU CB Antenna Mount Kit Stainless - Boxed JK/JKU 3rd Brake Light Extension Bracket Kit
TeraFlex JK Front Swaybar Quick Disconnect Upper Stud Bracket TeraFlex JK Rock Slider Cap - Front Driver / Rear Passenger TeraFlex JK Rock Slider Cap - Rear Driver / Front Passenger
TeraFlex JK 0"-3" Front Swaybar Quick Disconnect Link TeraFlex S/T Swaybar Crossmember Bushing - 1/5" I.D. TeraFlex JK Rock Slider Rubber Beading Seal - 1 Meter
TeraFlex JK Drag Link Stock Tapered Insert Sleeve Rock Hard 4x4 Bolt-In Ultimate Sport Cage for Jeep Wrangler JK 2/4DR 2011 - 2018 Rebel Off Road Jeep Black Grille Emblem
Rebel Off Road Jeep Black Grille Emblem
Price: $59.95 Guaranteed in stock!
The RH4x4 Jeep bolt-in Sport Cage is the cornerstone of Rock Hard 4x4 parts. Developed first for the Jeep Wrangler TJ and proven after years and years of trail use and abuse - the RH4x4 bolt-in Sports Cage has become one of the most popular safety upgrades in the Jeep aftermarket industry. Replace your chrome factory Jeep emblem with this factory Mopar black emblem.
WINDSHIELD LIGHT HINGE MOUNT BRACKET FOR JEEP WRANGLER JK (2007-2015) - BLACK - KC HiLiTES #7316 2-TAB HOOD MOUNT LIGHT BAR FOR JEEP WRANGLER JK (2007-2015) - BLACK - KC HiLiTES #7409 JEEP JK OVERHEAD MOUNT BRACKET SET FOR 50" LED 07-15 - KC HiLiTES #7323
KC HiLiTES 7316 2007-2015 Jeep Wrangler Windshield Light Mounts are black powder coated steel designed specifically for the JK Wrangler. The mounting brackets easily fastens securely to factory windshield frame hinges using existing factory holes, with no drilling required. Sold in pairs.

KC Hilites 7409 2007-2015 Jeep Wrangler Hood Mount Light Bars are black powder coated with a textured finish. Designed specifically for the JK Wrangler, this two-tab hood light bar mounts directly to the factory bolts for a quick and easy installation.

KC HiLiTES has the ultimate LED light bar mounting solutions for your Jeep Wrangler JK. This specific LED light bracket will mount one of our C50 C-Series LED off road light bars. It comes with all the hardware and protection necessary to complete this overhead LED light bar setup.

Black Textured Powder Coated Steel
Specially designed to precisely mount C-Series Light Bar
Mounts to Factory Bolt Locations (No Drilling Required) for Easy Installation
Designed in the USA

JEEP JK HOOD MOUNT BRACKET SET FOR 30" LED 07-15 - KC HiLiTES #7324 JEEP JK GRILLE LED MOUNT BRACKET SET FOR 20" LED 07-15 - KC HiLiTES #7325 STAGE 1 OFF ROAD LED LIGHT KIT - JEEP JK - #97009 - KC HiLiTES
Features:
Black Textured Powder Coated Steel
Specially designed to precisely mount C-Series Light Bar
Mounts to Factory Bolt Locations (No Drilling Required) for Easy Installation
Designed in the USA
Parts Included:
4 - M8 x 1.25 x 30mm black bolts
4 - M8 black washers
4 - Spacers

Featured:
Black Textured Powder Coated Steel
Specially designed to precisely mount C-Series Light Bar
Mounts to Factory Bolt Locations (No Drilling Required) for Easy Installation
Designed in the USA

THIS KIT INCLUDES
A-PILLAR LIGHTS 6" Apollo Pro Halogen Pair Pack System - Black - KC #150 (Spot Beam) Qty: 1
A-PILLAR BRACKETS Windshield light hinge mount bracket for Jeep Wrangler JK (2007-2015) - Black - KC #7316 Qty: 1
FRONT BUMPER LIGHTS 6" Apollo Pro Halogen Pair Pack System - Black - KC #151 (Spread Beam) Qty: 1
LIGHT BAR 2-Tab Light Bar for Jeep Wrangler JK (2007-2015) - Black - KC #74071 Qty: 1


OVERVIEW
Jeeps and off-roading go together like bread and butter, and KC HiLiTES complete this perfect package with proven, reliable, and performance-oriented Halogen lighting systems. Our Stage 1 off-road kit provides you with proven lighting performance in the form of Apollo Pro 6" spot lights for the A-pillars of your Jeep as well as another set of Apollo Pro 6" lights, this time in spread pattern, and a 2-tab light bar to mount this setup at the front. As with all of our lighting products, the 23 year, full KC HiLiTES warranty covers these products and gives you the confidence to know that we have been standing behind all of our products for all 45 years that we have been in business!


NightHawk Light Brow GenRight JK Aluminum Front Inner Fenders (2 Door/4 Door) GenRight JEEP JK Aluminum Front Inner Fenders (2 Door & 4 Door) - Black

Easy To Install, Factory Painted, and Down-Right Mean


NightHawk Light Brow dramatically changes the attitude of your factory Jeep grille. Painted to match from our state of the art paint facility, the brow is ready for install fresh out of the box: no added expense of taking it to the shop. Installation is simple. In less than 5 minutes with no drilling required, your Light Brow can be mounted on your factory grille, instantly enhancing your Jeep's front end styling. Built from high density ABS, NightHawk is trail-tested and road proven. Sleek, low profile, and downright sexy: go from stock to not, with the NightHawk Light Brow by UnderCover.

UnderCover's team of engineers have designed the NightHawk Light Brow to precisely fit factory JK Jeep Grille's.


NightHawk Light Brow is made of ABS composite material, and comes painted straight from our state of the art paint facility.

Installation is simple and takes about 5 minutes with NO drilling required. Using factory Jeep components, take your JK from stock to not in just a few minutes.

Every Light Brow comes standard with a replacement weather strip attached to retain the factory designed weather seal.
All UnderCover products are made right here in the U.S.A.

These are the all new GenRight Aluminum Inner Fenders for 2 Door and 4 Door Jeep JK's.

The one piece design allows for flawless installation, and features a unique mesh vent with a laser cut GR logo to keep your engine compartment cool, and add that "WOW" factor to any JK.

Features:

Fits both 2 Door and 4 Door Jeep JK's
Laser Cut and CNC Bent for a precision fit
One piece design for an easy install
Mesh vent to keep engine compartment cool
Made from 6061-T6 Aluminum for maximum durability and corrosion resistance
Mounting hardware included
Made in the USA
These are the all new GenRight Aluminum Inner Fenders for 2 Door and 4 Door Jeep JK's.

The one piece design allows for flawless installation, and features a unique mesh vent with a laser cut GR logo to keep your engine compartment cool, and add that "WOW" factor to any JK.

Features:
  • Fits both 2 Door and 4 Door Jeep JK's
  • Laser Cut and CNC Bent for a precision fit
  • One piece design for an easy install
  • Removable mesh vent to keep engine compartment cool
  • Made from 6061-T6 Aluminum for maximum durability and corrosion resistance
  • Powder Coated Black
  • Mounting hardware included
  • Made in the USA
Poison Spyder JK TrailGate - 17-66-010
Poison Spyder JK TrailGate - 17-66-010
MSRP: $548.90
Price: $499.00
Save $49.90!
Tired of the limited functionality of your Jeep's swing-out tailgate? Do you yearn for the convenience and functionality of the drop-down tailgates from back in the day? Looking to shed a few pounds while gaining a smooth new look for your trail rig? The Poison Spyder TrailGate replaces your Jeep's heavy, cumbersome swing-out tailgate with a lightweight, sleek, aluminum drop-down tailgate.