Currently viewing: HOME > Wrangler LJ / TJ 1997-2006 > Steering
High Steer / Drag Link Pitman Arms Assisted
Stabilizers / Accessories Tie Rods / Ball Joints
Sort By:
Page of 1
TJ/LJ 9550 VSS Steering Stabilizer Mount Kit - Skin Pack TJ/LJ 9550 VSS Steering Stabilizer Mounting Kit - Boxed JK/JKU & TJ/LJ 9550 VSS Steering Stabilizer
TJ/LJ 9550 VSS Steering Stabilizer Mount Kit - Skin Pack
MSRP: $56.99
Price: $54.14
Save $2.85!
TJ/LJ 9550 VSS Steering Stabilizer Mounting Kit - Boxed
MSRP: $56.99
Price: $54.14
Save $2.85!
JK/JKU & TJ/LJ 9550 VSS Steering Stabilizer
MSRP: $60.99
Price: $57.94
Save $3.05!
The TeraFlex TJ steering stabilizer bracket kit is designed to work with our aluminum hex tie-rod & drag link tubing used in our High Steer Kit. Combine this kit with the above steering stabilizer to complete your steering system. Sold in skin packaging for retail point of sale. The TeraFlex TJ steering stabilizer bracket kit is designed to work with our aluminum hex tie-rod & drag link tubing used in our High Steer Kit. Combine this kit with the above steering stabilizer to complete your steering system. The TeraFlex oversized steering stabilizer is built for the stress that an off road Jeep® will put it through.
Rock Krawler LJ Standard 4" Drop Pitman Arm Rock Krawler TJ Standard 4" Drop Pitman Arm Dana 60 Steering Arm - Driver
Rock Krawler LJ Standard 4" Drop Pitman Arm
MSRP: $69.00
Price: $65.00
Save $4.00!
Rock Krawler TJ Standard 4" Drop Pitman Arm
MSRP: $69.00
Price: $65.00
Save $4.00!
Dana 60 Steering Arm - Driver
MSRP: $74.99
Price: $71.24
Save $3.75!
TeraFlex Dana 60 steering arms allow for multiple steering mounting points and positions for custom applications. Steering arms are available for either driver or passenger side.
Dana 60 Steering Arm - Passenger Rock Krawler Heavy Duty Tie Rod Synergy MFG '90-'06 Jeep YJ/TJ/LJ, '90-01 Jeep XJ, 93-98 Jeep ZJ Ball Joints D30/D44 (1 Upper and 1 Lower)
Dana 60 Steering Arm - Passenger
MSRP: $74.99
Price: $71.24
Save $3.75!
Rock Krawler Heavy Duty Tie Rod
MSRP: $99.00
Price: $89.00
Save $10.00!
TeraFlex Dana 60 steering arms allow for multiple steering mounting points and positions for custom applications. Steering arms are available for either driver or passenger side.
Description:
  • Designed to replace the factory ball joints that are prone to premature wear on lifted vehicles with large off-road tires
  • Fully greasable metal on metal design
  • Machined bearing housing made from sintered graphite, bronze, and 1045 steel for a strong, smooth, bearing surface
  • Ball joint stud made from 4140 steel with an induction heat treated bearing surface for smooth operation and maximum life
  • Uses a larger stud than stock
  • Ball joint boot is made from tear/wear resistant silicone polyurethane
  • Completely eliminates the stock style nylon liner for improved performance and durability
  • Outperforms the factory ball joint assembly and includes all necessary hardware for installation
  • Single Set includes: (1) upper, (1) lower
  • Complete Set includes: 2 Single Sets
  • 12 Month Unlimited-Warranty (see warranty information)
  • Synergy High Performance Grease (4119) is the recommended grease for this product
TeraFlex Dana 60 HD Ball Joint Upper & Lower Kit - w/out knurl JK / TJ / LJ TeraFlex Dana 60 HD Ball Joint Upper & Lower Kit - w/ knurl JK / TJ / LJ Synergy MFG '90-'06 Jeep YJ/TJ/LJ, '90-01 Jeep XJ, 93-98 Jeep ZJ Ball Joints D30/D44 (2 Upper and 2 Lower)
TeraFlex Dana 60 HD Ball Joints replace the weak factory ball joints that are unable to handle the demands of repeated off road use or larger tires. The ball joint studs are made from 4140 chrome moly steel for high hardenability and are heat treated to provide excellent fatigue and abrasion resistance. The weak factory plastic cups have been eliminated. The upper ball joint has two sintered metal bearings to handle the rotational load and the lower ball stud rides in a metal cup that is threaded to provide for a precise pre-load. In-between the lower ball joint threaded cup and ball stud is a special plate spring made from high carbon tool steel for excellent wear resistance as the lower joint must bear the vehicle weight. The lower ball joint also features an oversized flanged nut for a good bearing surface against the outer knuckle. Both ball joints have grease zerks that are easy to service. The lower ball joint has a special flush needle zerk that is offset for u-joint clearance and ease of maintenance. Note: We recommend ball joints without knurls as they will not score the inner knuckle and open up the bore. We also offer ball joint with knurls for ball joints that have a loose press fit in the inner knuckle due to repeated ball joint replacement or if knurled ball joints have been installed in the past. TeraFlex Dana 60 HD Ball Joints replace the weak factory ball joints that are unable to handle the demands of repeated off road use or larger tires. The ball joint studs are made from 4140 chrome moly steel for high hardenability and are heat treated to provide excellent fatigue and abrasion resistance. The weak factory plastic cups have been eliminated. The upper ball joint has two sintered metal bearings to handle the rotational load and the lower ball stud rides in a metal cup that is threaded to provide for a precise pre-load. In-between the lower ball joint threaded cup and ball stud is a special plate spring made from high carbon tool steel for excellent wear resistance as the lower joint must bear the vehicle weight. The lower ball joint also features an oversized flanged nut for a good bearing surface against the outer knuckle. Both ball joints have grease zerks that are easy to service. The lower ball joint has a special flush needle zerk that is offset for u-joint clearance and ease of maintenance. Note: We recommend ball joints without knurls as they will not score the inner knuckle and open up the bore. We also offer ball joint with knurls for ball joints that have a loose press fit in the inner knuckle due to repeated ball joint replacement or if knurled ball joints have been installed in the past.
Description:
  • Designed to replace the factory ball joints that are prone to premature wear on lifted vehicles with large off-road tires
  • Fully greasable metal on metal design
  • Machined bearing housing made from sintered graphite, bronze, and 1045 steel for a strong, smooth, bearing surface
  • Ball joint stud made from 4140 steel with an induction heat treated bearing surface for smooth operation and maximum life
  • Uses a larger stud than stock
  • Ball joint boot is made from tear/wear resistant silicone polyurethane
  • Completely eliminates the stock style nylon liner for improved performance and durability
  • Outperforms the factory ball joint assembly and includes all necessary hardware for installation
  • Single Set includes: (1) upper, (1) lower
  • Complete Set includes: 2 Single Sets
  • 12 Month Unlimited-Warranty (see warranty information)
  • Synergy High Performance Grease (4119) is the recommended grease for this product
TeraFlex Dana 60 HD Ball Joint Upper & Lower Set of 4 - w/out knurl JK / TJ / LJ TeraFlex Dana 60 HD Ball Joint Upper & Lower Set of 4 - w/ knurl JK / TJ / LJ Currie Complete Heavy Duty Tie Rod and Drag Link System
TeraFlex Dana 60 HD Ball Joints replace the weak factory ball joints that are unable to handle the demands of repeated off road use or larger tires. The ball joint studs are made from 4140 chrome moly steel for high hardenability and are heat treated to provide excellent fatigue and abrasion resistance. The weak factory plastic cups have been eliminated. The upper ball joint has two sintered metal bearings to handle the rotational load and the lower ball stud rides in a metal cup that is threaded to provide for a precise pre-load. In-between the lower ball joint threaded cup and ball stud is a special plate spring made from high carbon tool steel for excellent wear resistance as the lower joint must bear the vehicle weight. The lower ball joint also features an oversized flanged nut for a good bearing surface against the outer knuckle. Both ball joints have grease zerks that are easy to service. The lower ball joint has a special flush needle zerk that is offset for u-joint clearance and ease of maintenance. Note: We recommend ball joints without knurls as they will not score the inner knuckle and open up the bore. We also offer ball joint with knurls for ball joints that have a loose press fit in the inner knuckle due to repeated ball joint replacement or if knurled ball joints have been installed in the past. TeraFlex Dana 60 HD Ball Joints replace the weak factory ball joints that are unable to handle the demands of repeated off road use or larger tires. The ball joint studs are made from 4140 chrome moly steel for high hardenability and are heat treated to provide excellent fatigue and abrasion resistance. The weak factory plastic cups have been eliminated. The upper ball joint has two sintered metal bearings to handle the rotational load and the lower ball stud rides in a metal cup that is threaded to provide for a precise pre-load. In-between the lower ball joint threaded cup and ball stud is a special plate spring made from high carbon tool steel for excellent wear resistance as the lower joint must bear the vehicle weight. The lower ball joint also features an oversized flanged nut for a good bearing surface against the outer knuckle. Both ball joints have grease zerks that are easy to service. The lower ball joint has a special flush needle zerk that is offset for u-joint clearance and ease of maintenance. Note: We recommend ball joints without knurls as they will not score the inner knuckle and open up the bore. We also offer ball joint with knurls for ball joints that have a loose press fit in the inner knuckle due to repeated ball joint replacement or if knurled ball joints have been installed in the past.
The Currie Currectlync® heavy duty tie rod and drag link system for TJ, LJ, XJ, and MJ vehicles features, a 1 ¼" diameter forged alloy drag link, and 1 ¼" solid alloy steel tie rod bar that is bored and threaded on the ends. All 7/8" thread tie rod ends with boots are included as well as the Currie heavy duty steering stabilizer bracket. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary. This unit is rated at 200% stronger than the stock components. NOTE: This unit is designed to be used on vehicles with 4" of lift. It can be used on vehicles with less lift, but the vehicle must have a minimum of a 2" bump stop (over stock). Also, on vehicles with no lift, 2 of the tie rod ends may need be trimmed to achieve proper adjustment.
TJ/LJ Dana 30 High Steer Kit TJ/LJ Dana 30 Pro LCG High Steer Kit
TJ/LJ Dana 30 High Steer Kit
MSRP: $744.99
Price: $707.74
Save $37.25!
TJ/LJ Dana 30 Pro LCG High Steer Kit
MSRP: $945.99
Price: $898.69
Save $47.30!
The TeraFlex TJ high steer system is designed to be used with 4+" of lift, and will beef up the essential steering components of your Dana 30 front axle. This kit also helps to maximize steering component ground clearance and assist in easy correction of steering geometry. Note: The high steer system is not an all inclusive kit. Additional modifications will be required that are not included in the TeraFlex high steer system. These modifications may include front swaybar links, front trackbar mounting, and offset wheels. Will work with 15” wheel with 3.5” or less backspacing. This kit will fit all TJ wrangler models including Rubicon and Unlimited and is for use with 4+" of lift. The TeraFlex TJ high steer system is designed to be used with our top of the line suspension system, the Pro LCG (4+" of lift), and will beef up the essential steering components of your Dana 30 front axle. This kit also helps to maximize steering component ground clearance and assist in easy correction of steering geometry. Note: The high steer system is not an all inclusive kit. Additional modifications will be required that are not included in the TeraFlex high steer system. These modifications may include front swaybar links, front trackbar mounting, and offset wheels. Will work with 15” wheel with 3.5” or less backspacing. This kit will fit all TJ wrangler models including Rubicon and Unlimited and is for use with 4+" of lift.