Currently viewing: HOME > Wrangler JK 2007-2018 > Lift Kits and Suspension > Control Arms / Control Arm Brackets and Mounts
Sort By:
Page of 1
TJ/LJ Small Joint Rebuild Kit - Frame End JK Small Rear Upper Long Adjustable FlexArm Joint Rebuild Kit - Frame End JK Small Rear Upper Adjustable FlexArm Joint Rebuild Kit - Axle End
The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring.
JK Small Front Upper Long Adjustable FlexArm Rebuild Kit - Frame End Small Joint Field Rebuild Tool Kit - Adjustable Track Bar & Adjustable Flexarm Large Joint Field Rebuild Tool Kit - Adjustable Flexarm
The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. The TeraFlex FlexArm joint field rebuild tool will make joint rebuilding in the field as simple as it gets. The repair tool is easy to use with two open end wrenches, or sockets. The use of a bench vise is extremely helpful when rebuilding FlexArm joints. This tool is for small FlexArm joints. The TeraFlex FlexArm joint field rebuild tool will make joint rebuilding in the field as simple as it gets. The repair tool is easy to use with two open end wrenches, or sockets. The use of a bench vise is extremely helpful when rebuilding FlexArm joints. This tool is for large FlexArm joints.
TJ/LJ Large Joint Rebuild Kit TeraFlex JK Front Axle Bracket  Lower FlexArm - Driver Rebel Off Road Jeep JK 2007-2011 Grade 8 Hardware Upgrade
Rebel Off Road Jeep JK 2007-2011 Grade 8 Hardware Upgrade
MSRP: $49.95
Price: $44.95 Guaranteed in stock!
Save $5.00!
The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. The TeraFlex JK front CRD60 axle bracket lower driver FlexArm mount is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one front lower FlexArm mount and is designed for Dana 60 axles with 3" diameter axle tube. Welding is required. It does not take much for your 07-11' Jeep Wrangler JK to develop steering and ride quality issues. Simple bolt on suspension upgrades like a budget boost or leveling kit have been known to cause bump steer and death wobble.  This is caused by a number of reasons, and simply adding a heavy duty steering stabilizer/dampener isn't the right solution.

The right way to fix this often difficult to troubleshoot problem can be as simple as a Grade-8 Hardware upgrade.
JK Rear CRD60 Axle Bracket Upper Flexarm Mount - Driver - 3990051 JK Rear CRD60 Axle Bracket Upper Flexarm Mount - Passenger - 3990050 Rock Krawler JK Heavy Duty Front Lower Control Arm Mounts
Rock Krawler JK Heavy Duty Front Lower Control Arm Mounts
MSRP: $79.00
Price: $79.00
Price: $75.05
Save $3.95!
The TeraFlex JK rear CRD60 axle bracket upper driver FlexArm mount is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one rear upper upper control arm mount (with integrated swaybar mount) and is designed for Dana 60 axles with 3" diameter axle tube. Welding is required. The TeraFlex JK rear CRD60 axle bracket upper passenger FlexArm mount is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one rear upper upper control arm mount (with integrated swaybar mount) and is designed for Dana 60 axles with 3" diameter axle tube. Welding is required.
The Rock Krawler heavy duty lower control arm mounts are a sure fire way to solidify the front lower control arm mounting points on your axle.
JK CRD60 Front Axle Bracket Upper Flexarm Mount - Driver - 3990753 TeraFlex JK CRD60 Front Axle Bracket Upper Flexarm Mount - Passenger JK Front Upper Adjustable FlexArm - Single
The TeraFlex JK front CRD60 axle bracket upper driver FlexArm mount is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one front lower FlexArm mount and is designed for CRD60 axles (the mount bolts to the CRD60 housing top mounting pad). Welding is required. The TeraFlex JK front CRD60 axle bracket upper passenger FlexArm mount is precision laser cut from 1/4 steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one front upper FlexArm mount and is designed for Dana 60 axles with 3" diameter axle tube. Welding is required.
The TeraFlex JK front upper FlexArm can be added to any existing suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes one adjustable JK front upper FlexArm.
JK Extra Short Rear Upper Adjustable FlexArm- Single JK Rear Upper Adjustable FlexArm Kit - Single JK Rear Lower Adjustable FlexArm Kit - Single
The TeraFlex JK extra-short rear upper FlexArm can be added to any existing suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes one adjustable JK extra-short rear upper FlexArm. Note: These FlexArms are designed to be used with a 3" or less lift kit where rear pinion adjustment is needed and stock lower control arms are retained.
The TeraFlex JK rear upper long FlexArm can be added to any existing suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes one adjustable JK rear upper long FlexArm.
The TeraFlex JK rear lower FlexArm can be added to any existing suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes one adjustable JK rear lower FlexArm.
JK Front Lower Adjustable FlexArm - Single JK/JKU Sport Flexarm Kit - Front Upper Preset Control Arms (2.5-3” Lift) JK Front Upper Long Adjustable FlexArm Kit - Single
The TeraFlex JK front lower FlexArm can be added to any existing suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes one adjustable JK front lower FlexArm.
TeraFlex sport fixed-length flexarms are designed to offer maintenance free performance for 2.5" - 3" lift. Pre-adjusted length arm corrects caster and pinion angle for 2.5" - 3" lift kits. 1-5/8" x 0.156 wall DOM tube stands up to trail abuse and demands. High quality, factory style bushings provide excellent vibration damping ride quality characteristics with zero maintenance. Full range of movement will not restrict articulation or flex off-road. Premium black e-dipped coating provides superior durability and corrosion resistance. Install time: 1.5 hours.
The TeraFlex JK front upper long FlexArm can be added to any existing 2.5"-6" Elite LCG suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes one adjustable JK front upper long FlexArm.
JK Front Lower/ Rear Upper Short FlexArm Joint Rebuild Kit - 4 Arms JK Straight Rear Lower Long Adjustable FlexArm - Single JK Adjustable Rear Upper Long FlexArm- Single
The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. The TeraFlex JK rear lower long FlexArm can be added to any existing 2.5"-3" Elite LCG suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes one adjustable JK rear lower long FlexArm. The TeraFlex JK rear upper FlexArm can be added to any existing suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes one adjustable JK rear upper FlexArm.
JK/JKU Sport Flexarm Kit - Front Lower Preset Control Arms (2.5-3” Lift) JK/JKU Sport Flexarm Kit - Rear Lower Preset Control Arms (2.5-3” Lift) JK/JKU Sport Flexarm Kit - Rear Upper Preset Control Arms (2.5-3” Lift)
TeraFlex sport fixed-length flexarms are designed to offer maintenance free performance for 2.5" - 3" lift. Pre-adjusted length arm corrects caster and pinion angle for 2.5" - 3" lift kits. 1-5/8" x 0.156 wall DOM tube stands up to trail abuse and demands. High quality, factory style bushings provide excellent vibration damping ride quality characteristics with zero maintenance. Full range of movement will not restrict articulation or flex off-road. Premium black e-dipped coating provides superior durability and corrosion resistance. Install time: 1.5 hours.
TeraFlex Sport fixed-length flexarms are designed to offer maintenance free performance for 2.5" - 3" lift. Pre-adjusted length arm corrects caster and pinion angle for 2.5" - 3" lift kits. 1-5/8" x 0.156 wall DOM tube stands up to trail abuse and demands. High quality, factory style bushings provide excellent vibration damping ride quality characteristics with zero maintenance. Full range of movement will not restrict articulation or flex off-road. Premium black e-dipped coating provides superior durability and corrosion resistance. Install time: 1.5 hours.
TeraFlex sport fixed-length flexarms are designed to offer maintenance free performance for 2.5" - 3" lift. Pre-adjusted length arm corrects caster and pinion angle for 2.5" - 3" lift kits. 1-5/8" x 0.156 wall DOM tube stands up to trail abuse and demands. High quality, factory style bushings provide excellent vibration damping ride quality characteristics with zero maintenance. Full range of movement will not restrict articulation or flex off-road. Premium black e-dipped coating provides superior durability and corrosion resistance. Install time: 2 hours.
Rock Krawler JK Adjustable Front Upper Control Arms Rock Krawler JK Double Adjustable Rear Upper Control Arms JK Rear Lower Driver Side Long Adjustable FlexArm - Single
Rock Krawler JK Adjustable Front Upper Control Arms
MSRP: $249.00
Price: $229.00
Price: $217.55
Save $31.45!
Rock Krawler JK Double Adjustable Rear Upper Control Arms
MSRP: $249.00
Price: $229.00
Price: $217.55
Save $31.45!
Rock Krawler front upper control arms are a great way to gain adjustability and off-road performance! Rock Krawler rear upper control arms are a great way to gain adjustability and off-road performance! The TeraFlex JK rear lower driver side long FlexArm can be added to any existing suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes one adjustable JK rear lower driver side long FlexArm.
JK Rear Lower Passenger Side Long Adjustable FlexArm - Single JK Front Lower Long Adjustable FlexArm Kit - Single Rock Krawler JK High Clearance Adjustable Front Lower Control Arms
Rock Krawler JK High Clearance Adjustable Front Lower Control Arms
MSRP: $295.00
Price: $279.00
Price: $265.05
Save $29.95!
The TeraFlex JK rear lower passenger side long FlexArm can be added to any existing suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes one adjustable JK rear lower passenger side long FlexArm. The TeraFlex JK front lower long FlexArm can be added to any existing 2.5"-6" Elite LCG suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes one adjustable JK front lower long FlexArms. Rock Krawler adjustable lower control arms are bent for improved ground clearance and cross over angles!
Rock Krawler JK High Clearance Adjustable Rear Lower Control Arms Rock Krawler JK High Clearance Adjustable Rear Lower Control Arms JK/JKU Alpine Flexarm Kit - Front Upper Adjustable Control Arms (2-4” Lift)
Rock Krawler JK High Clearance Adjustable Rear Lower Control Arms
MSRP: $295.00
Price: $279.00
Price: $265.05
Save $29.95!
Rock Krawler JK High Clearance Adjustable Rear Lower Control Arms
MSRP: $295.00
Price: $279.00
Price: $265.05
Save $29.95!
Rock Krawler adjustable lower control arms are bent for improved ground clearance and cross over angles! Rock Krawler adjustable lower control arms are bent for improved ground clearance and cross over angles! The Alpine Flexarms blend the maintenance free dependability of our sport flexarms with the complete adjustability of our monster flexarms. The Alpine arms feature high quality, factory style bushings to provide excellent vibration damping rubber bushings at both ends for premium daily driving and ride quality characteristics. The arms offer full range of movement and have excellent articulation and flex off-road. Premium black e-dipped coating provides superior durability and corrosion resistance. The aluminum pinch collar locks the adjustable joint in position after proper length has been determined.
JK/JKU Alpine Flexarm Kit - Front Lower Adjustable Control Arms (2-4” Lift) JL/JLU | JK/JKU: Alpine Flexarm Kit - Rear Lower Adjustable Control Arms (0-4.5” | 2-4” Lift) JK/JKU Alpine Flexarm Kit - Rear Upper Adjustable Control Arms (2-4” Lift)
The Alpine Flexarms blend the maintenance free dependability of our sport flexarms with the complete adjustability of our monster flexarms. The Alpine arms feature high quality, factory style bushings to provide excellent vibration damping rubber bushings at both ends for premium daily driving and ride quality characteristics. The arms offer full range of movement and have excellent articulation and flex off-road. Premium black e-dipped coating provides superior durability and corrosion resistance. The aluminum pinch collar locks the adjustable joint in position after proper length has been determined.
The Alpine Flexarms blend the maintenance free dependability of our sport flexarms with the complete adjustability of our monster flexarms. The Alpine arms feature high quality, factory style bushings to provide excellent vibration damping rubber bushings at both ends for premium daily driving and ride quality characteristics. The arms offer full range of movement and have excellent articulation and flex off-road. Premium black e-dipped coating provides superior durability and corrosion resistance. The aluminum pinch collar locks the adjustable joint in position after proper length has been determined.
The Alpine Flexarms blend the maintenance free dependability of our sport flexarms with the complete adjustability of our monster flexarms. The Alpine arms feature high quality, factory style bushings to provide excellent vibration damping rubber bushings at both ends for premium daily driving and ride quality characteristics. The arms offer full range of movement and have excellent articulation and flex off-road. Premium black e-dipped coating provides superior durability and corrosion resistance. The aluminum pinch collar locks the adjustable joint in position after proper length has been determined.
JK Front Upper Adjustable FlexArm Kit - Pair JK Rear Upper Adjustable FlexArm Kit - Pair JK Extra Short Rear Upper Adjustable FlexArm Kit - Pair
The TeraFlex JK front upper FlexArm kit can be added to any existing suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes two adjustable JK front upper FlexArms. The TeraFlex JK rear upper FlexArm kit can be added to any existing suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes two adjustable JK rear upper FlexArms. The TeraFlex JK extra-short rear upper FlexArm kit can be added to any existing suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes two adjustable JK extra-short rear upper FlexArms. Note: These FlexArms are designed to be used with a 3" or less lift kit where rear pinion adjustment is needed and stock lower control arms are retained.
JK Rear Lower Adjustable FlexArm Kit - Pair JK Long FlexArm Joint Complete Rebuild Kit - All 8 Arms JK Short FlexArm Joint Complete Rebuild Kit - All 8 Arms
TeraFlex JK FlexArms can be added to any existing suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement.
The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring.
JK Front Lower Adjustable FlexArm Kit  -Pair Rock Krawler 3 Link Rear Conversion (Mid Arm/Short Arm) JK/JKU Sport Flexarm Kit - 4-Arm Preset Control Arms - Front Lower & Rear Upper (2.5-3” Lift)
TeraFlex JK FlexArms can be added to any existing suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement.
Our independent 3 link rear mid arm conversion:
  • Works well with most short arm and mid arm kits on the market
  • Allows for awesome rear axle articulation
  • Provides Adjustable Anti-Squat for better tuning
  • Provides a weld-in rear cradle to strengthen the rear axle housing
  • Comes with Rock Krawler's Abuse Proof Lifetime Warranty on all Hard Parts
TeraFlex sport fixed-length flexarms are designed to offer maintenance free performance for 2.5" - 3" lifts. Pre-adjusted length arm corrects caster and pinion angles for 2.5" - 3" lift kits. 1-5/8" x 0.156 wall DOM tube stands up to trail abuse and demands. High quality, factory style bushings provide excellent vibration damping ride quality characteristics with zero maintenance. Full range of movement will not restrict articulation or flex off-road. Premium black e-dipped coating provides superior durability and corrosion resistance. This kit includes front lower, and rear upper sport flexarms. Install time: 2.5 hours.
JK Rear Upper Long Adjustable FlexArm Kit - Pair JK Straight Rear Lower Long Adjustable FlexArm Kit - Pair JK Front Lower Long Adjustable FlexArm Kit - Pair
The TeraFlex JK rear upper long FlexArm kit can be added to any existing 2.5"-6" Elite LCG suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes two adjustable JK rear upper long FlexArm. The TeraFlex JK rear lower long FlexArm kit can be added to any existing 2.5"-3" Elite LCG suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes two adjustable JK rear lower long FlexArms. The TeraFlex JK front lower long FlexArm kit can be added to any existing 2.5"-6" Elite LCG suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes two adjustable JK front lower long FlexArm.
JK Rear Lower Long Adjustable FlexArm Kit - Pair Rock Krawler 3 Link Rear Conversion (Long Arm) JK/JKU Alpine Long Flexarm Bracket Kit (3-6” Lift)
The TeraFlex JK rear lower long FlexArm kit can be added to any existing 4"-6" Elite LCG suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes two adjustable JK rear lower long FlexArms.
Our independent 3 link rear long arm conversion:
  • Works well with most long arm kits on the market
  • Allows for awesome rear axle articulation
  • Provides Adjustable Anti-Squat for better tuning
  • Provides a weld-in rear cradle to strengthen the rear axle housing
  • Comes with our Abuse Proof Lifetime Warranty on all Hard Parts
The TeraFlex Elite LCG bracket kit with long FlexArms features CAD designed bracketry that has been specifically engineered to provide maximum strength. Streamlined mounting points incorporate both upper and lower mounts in one bracket for simplified installation and seamless factory styling. This kit includes all Elite LCG frame brackets, and all necessary hardware. Removal of the factory control arm bracketry and welding is required. Fits all JK Wrangler models including Rubicon and Unlimited.
TJ Rear Upper: Adjustable Pro LCG 4-Link Long Flexarm Kit (3-6” Lift) JK/JKU Sport Flexarm Kit - 8-Arm Preset Control Arms (2.5-3” Lift) JK/JKU Alpine Flexarm Kit - 8-Arm Adjustable Control Arms (2-4” Lift)
The TeraFlex TJ rear upper long flexarm kit is designed to work with the TeraFlex Pro LCG suspension system. These arms can also be used in custom link suspensions. This kit includes 2 adjustable rear upper long FlexArms. Fits TJ Wrangler models including Rubicon (Does not fit TJ Unlimited). TeraFlex Sport fixed-length flexarms are designed to offer maintenance free performance for 2.5" or 3" TeraFlex Elite LCG suspension system owners.
The Alpine Flexarms blend the maintenance free dependability of our sport flexarms with the complete adjustability of our monster flexarms. The Alpine arms feature high quality, factory style bushings to provide excellent vibration damping rubber bushings at both ends for premium daily driving and ride quality characteristics. The arms offer full range of movement and have excellent articulation and flex off-road. Premium black e-dipped coating provides superior durability and corrosion resistance. The aluminum pinch collar locks the adjustable joint in position after proper length has been determined.
JK Complete 8 Adjustable FlexArm Kit Rock Krawler X Factor Plus Long Arm Upgrade - 2 Door Rock Krawler X Factor Plus Long Arm Upgrade - 4 Door
Rock Krawler X Factor Plus Long Arm Upgrade - 2 Door
MSRP: $1,799.00
Price: $1,699.00
Save $100.00!
Rock Krawler X Factor Plus Long Arm Upgrade - 4 Door
MSRP: $1,799.00
Price: $1,699.00
Save $100.00!
The TeraFlex JK complete 8 FlexArm kit can be added to any existing suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes all 8 adjustable front and rear lower and upper FlexArms.
JK Complete 8 Long Adjustable FlexArm Kit for 4"-6" Lift Rock Krawler Triple Threat Long Arm Upgrade - 2 Door Rock Krawler Triple Threat Long Arm Upgrade - 4 Door
Rock Krawler Triple Threat Long Arm Upgrade - 2 Door
MSRP: $1,999.00
Price: $1,899.00
Save $100.00!
Rock Krawler Triple Threat Long Arm Upgrade - 4 Door
MSRP: $1,999.00
Price: $1,899.00
Save $100.00!
The TeraFlex JK complete 8 long FlexArm kit can be added to any existing TeraFlex Elite LCG suspension lift,or can be used for custom applications. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes all 8 adjustable front and rear lower and upper long FlexArms.