Currently viewing: HOME > Wrangler LJ / TJ 1997-2006 > Electrical > Wiring Management
Sort By:
Page of 1
Spod Switch Legend - Stickers to Identify Switches Rugged Ridge CB/AM/FM Antenna Mount Kit; 97-18 Jeep Wrangler - 17212.20 2003 - 2006 Jeep TJ 6 Switch sPOD & Source System
White Vinyl Weatherproof with matte laminate coating, solid black background with white lettering. 49 labels per sheet. The Rugged Ridge CB/AM/FM Antenna Mount Kits ingenious new design delivers crystal-clear radio reception across all bands while maintaining the benefits of the factory JK antenna location. Replacing your factory antenna with our fully welded steel antenna mount will give you a convenient location to mount your choice of CB antennas (not included). The system includes the mounting bracket and all the necessary coaxial cable, wiring, connectors and hardware to complete the install- you just supply the antenna! No more whip antennas getting in the way of your rear lift gate or having to drill unwanted holes in your JK's body. With the Rugged Ridge CB/AM/FM Antenna System, your CB antenna will maintain the look of a stock setup but give you the advantages of an aftermarket antenna. Each system includes the following:
All required mounting brackets and hardware. System will come pre-wired ready to install.

Included:
Switch panel, header, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch (Tyco) cube style relays (SPST 30amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
1997 - 2002 Jeep TJ 6 Switch sPOD & Source System w/ Air Gauge Switch Pros SP-8100 8-Switch Panel Power System
Each system includes the following:
All required mounting brackets and hardware. System will come pre-wired ready to install.

Included:
Switch panel, header, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch (Tyco) cube style relays (SPST 30amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
Product Description:

  • Eight user-programmable switches
  • User-selectable switch legends
  • Illuminated switches with user-adjustable brightness
  • Programming and control via panel or smart phone
  • Bluetooth interface
  • 100A solid state power module, engine compartment rated
  • Automatic shutdown for overcurrent and low voltage
  • Programming options are: On/Off or Momentary, Ign. or Batt., Flash and Strobe functions, Low Voltage Disconnect, and Switch Memory
  • Plug and play installation
Switch Panel Specs:
  • 4L x 2W x .5H (excluding tabs)
  • Enclosure: Anodized Aluminum
  • Orange LED switch indicators
  • Green backlighting
  • 4 interface cable
Power Module Specs:
  • 6L x 3W x .5H (excluding connectors)
  • Enclosure: Anodized aluminum
  • 8 Outputs, 7 rated @ 18A, 1 rated @ 30A
  • 100A maximum rating 125C to -40C
  • 16-pin, sealed automotive connector, wire harness w/100A fused power cable, light, and ignition input wires, and eight 3long output wires
Switches can be programmed to be: On/Off or Momentary, ignition or battery powered, flash, strobe, low voltage disconnect, and memorize previous settings. There is also a programming function to adjust the brightness of backlighting and indicator LEDs.