Currently viewing: HOME > Wrangler LJ / TJ 1997-2006 > Lift Kits and Suspension > Sway Bars
Sort By:
Page of 1
Teraflex Body 4" Link QD TJ/LJ Sway Bar Quick Disconnect Link U-Bracket w/ Stud & Hardware Front Sway Bar Quick Disconnect 3/4” Lower Stud Kit (w/ Hitch Pin Clip, Lock Nut, & Washers)
Teraflex Body 4" Link QD

Product price is not filled in. This product cannot be purchased.

MSRP: $30.99
QD Link 4" long used with High Steer Kit and Sway Bar mounts The replacement TJ upper swaybar link u-bracket gives you the upper components required to replace missing or worn components. This kit includes u-bracket, tapered cone washer, flat washer, lock nut, and swaybar metal bushing sleeve. The replacement swaybar quick disconnect lower stud kit gives you the lower link components required to replace missing or worn components. This kit includes lower quick disconnect stud, hitch pin clip, large pin retainer washer, flat washer and lock nut.
Rock Krawler TJ 3.5" to 5.5" Rear Heavy Duty Sway Bar Links Rock Krawler LJ 3.5" to 5.5" Front Sway Bar Disconnects Rock Krawler TJ 3.5" to 5.5" Front Sway Bar Disconnects
Rock Krawler LJ 3.5" to 5.5" Front Sway Bar Disconnects
MSRP: $115.00
Price: $105.00
Save $10.00!
Rock Krawler TJ 3.5" to 5.5" Front Sway Bar Disconnects
MSRP: $115.00
Price: $105.00
Save $10.00!
Teraflex JK / TJ 4-6" Front Forged Swaybar Long Link Kit Teraflex JK / TJ 0-3" Front Forged Swaybar Long Link Kit TJ/LJ 3-6” Lift Front Sway Bar Quick Disconnect Kit - Skin Pack
Swaybar links for S/T Swaybars JKs and TJs 4-6" lift. Comes as a pair. Swaybar links for S/T Swaybars JKs and TJs 0-3" lift. Comes as a pair. TeraFlex Quick Disconnects are the leader in the industry. This design combines silent function with ease of use. The swaybar link uses a large polyurethane ball and pin for easy swaybar link removal. When connected for street use the link provides immediate reaction during swaybar loading to eliminate excess play. This results in improved lateral control and steering response compared to the stock rubber swaybar link bushings. When off-roading the swaybar links quickly disconnect and swing up out of the way for unrestricted axle articulation. Fits all TJ Wrangler models with 2"-6" of lift. Sold in skin packaging for retail point of sale.
TJ/LJ 0-2” Lift Front Sway Bar Quick Disconnect Kit - Skin Pack TJ/LJ 3-6” Lift Front Sway Bar Quick Disconnect Kit - Boxed TJ/LJ 0-2” Lift Front Sway Bar Quick Disconnect Kit - Boxed
TeraFlex Quick Disconnects are the leader in the industry. This design combines silent function with ease of use. The swaybar link uses a large polyurethane ball and pin for easy swaybar link removal. When connected for street use the link provides immediate reaction during swaybar loading to eliminate excess play. This results in improved lateral control and steering response compared to the stock rubber swaybar link bushings. When off-roading the swaybar links quickly disconnect and swing up out of the way for unrestricted axle articulation. Fits all TJ Wrangler models with 0"-2" of lift. Sold in skin packaging for retail point of sale. TeraFlex Quick Disconnects are the leader in the industry. This design combines silent function with ease of use. The swaybar link uses a large polyurethane ball and pin for easy swaybar link removal. When connected for street use the link provides immediate reaction during swaybar loading to eliminate excess play. This results in improved lateral control and steering response compared to the stock rubber swaybar link bushings. When off-roading the swaybar links quickly disconnect and swing up out of the way for unrestricted axle articulation. Fits all TJ Wrangler models with 2"-6" of lift. TeraFlex Quick Disconnects are the leader in the industry. This design combines silent function with ease of use. The swaybar link uses a large polyurethane ball and pin for easy swaybar link removal. When connected for street use the link provides immediate reaction during swaybar loading to eliminate excess play. This results in improved lateral control and steering response compared to the stock rubber swaybar link bushings. When off-roading the swaybar links quickly disconnect and swing up out of the way for unrestricted axle articulation. Fits all TJ Wrangler models with 0"-2" of lift.
TJ/LJ | ZJ | XJ Adjustable Front Track Bar Kit TJ/LJ 0-3” Lift Trail-rated Forged S/T Front Sway Bar System TJ/LJ 4-6” Lift Trail-Rate Forged S/T Front Sway Bar System
The TeraFlex TJ front adjustable trackbar will allow you to fine tune the front suspension to eliminate bump steer. The trackbar bushing is designed to reduce the effects of front wheel shimmy, improve durability and tunability. Fits TJs, XJs, and ZJs. This product will not work on stock vehicles, a minimum of 3” lift is required. The TeraFlex TJ Trail S/T Swaybar System is a trail only version of our S/T swaybar system. The trail tuned torsion bar provides balanced vehicle control reducing body sway and lean in sidehill and off camber situations while simultaneously allowing the suspension to fully cycle and articulate. The swaybar arm features several link mounting points to fine tune the torsion rate. The trail S/T swaybar system is designed as a constant use swaybar and does not have any disconnect or release features. Fits all TJ Wrangler models with 0"-3" of lift. Note: Wheels must have 4.5” or less backspacing. Note: The Trail S/T Swaybar is NOT recommended for street use, and is intended for trail use only (this swaybar does not provide adequate highway anti-roll characteristics). The TeraFlex TJ Trail S/T Swaybar System is a trail only version of our S/T swaybar system. The trail tuned torsion bar provides balanced vehicle control reducing body sway and lean in sidehill and off camber situations while simultaneously allowing the suspension to fully cycle and articulate. The swaybar arm features several link mounting points to fine tune the torsion rate. The trail S/T swaybar system is designed as a constant use swaybar and does not have any disconnect or release features. Fits all TJ Wrangler models with 4"-6" of lift. Note: Wheels must have 4.5” or less backspacing. Note: The Trail S/T Swaybar is NOT recommended for street use, and is intended for trail use only (this swaybar does not provide adequate highway anti-roll characteristics).
TJ/LJ 0-3” Lift Trail-rated Forged S/T Rear Sway Bar System TJ/LJ 4-6” Lift Trail-Rate Forged S/T Rear Sway Bar System Currie Enterprises Universal AntiRock Kit - 45 Inch Bar - W/ 18 Inch Steel Arms
The TeraFlex TJ Trail S/T Swaybar System is a trail only version of our S/T swaybar system. The trail tuned torsion bar provides balanced vehicle control reducing body sway and lean in sidehill and off camber situations while simultaneously allowing the suspension to fully cycle and articulate. The swaybar arm features several link mounting points to fine tune the torsion rate. The trail S/T swaybar system is designed as a constant use swaybar and does not have any disconnect or release features. Fits all TJ Wrangler models with 0"-3" of lift. Note: Wheels must have 4.5” or less backspacing. Note: The Trail S/T Swaybar is NOT recommended for street use, and is intended for trail use only (this swaybar does not provide adequate highway anti-roll characteristics). The TeraFlex TJ Trail S/T Swaybar System is a trail only version of our S/T swaybar system. The trail tuned torsion bar provides balanced vehicle control reducing body sway and lean in sidehill and off camber situations while simultaneously allowing the suspension to fully cycle and articulate. The swaybar arm features several link mounting points to fine tune the torsion rate. The trail S/T swaybar system is designed as a constant use swaybar and does not have any disconnect or release features. Fits all TJ Wrangler models with 4"-6" of lift. Note: Wheels must have 4.5” or less backspacing. Note: The Trail S/T Swaybar is NOT recommended for street use, and is intended for trail use only (this swaybar does not provide adequate highway anti-roll characteristics).
Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 45" torsion bar length and 18" long steel arms. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 45" bar is a .800" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
Currie Enterprises Universal AntiRock Kit - 45 Inch Bar - W/ 20 Inch Steel Arms Currie Enterprises Universal AntiRock Kit - 45 Inch Bar - W/ 17 Inch Steel Arms Currie Enterprises Universal AntiRock Kit - 32.0 Inch Bar - W/17 Inch Steel Arms
Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 45" torsion bar length and 20" long steel arms. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 45" bar is a .800" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 45" torsion bar length and 17" long steel arms. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 45" bar is a .800" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 32" torsion bar length and 17" long steel arms. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 32" bar is a .700" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
Currie Enterprises Universal AntiRock Kit - 32.0 Inch Bar - W/18 Inch Steel Arms Currie Enterprises Universal AntiRock Kit - 32.0 Inch Bar - W/20 Inch Steel Arms Currie Enterprises Universal AntiRock Kit - 32.0 Inch Bar - W/20 Inch Bent Steel Arms
Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 32" torsion bar length and 18" long steel arms. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 32" bar is a .700" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 32" torsion bar length and 20" long steel arms. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 32" bar is a .700" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 32" torsion bar length and 20" long steel arms with a 2" offset bend in them. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 32" bar is a .700" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
Currie Enterprises AntiRock Sway Bar Kit - With Modified 18 Inch Aluminum Arms - For TJ Front Currie Enterprises AntiRock Swaybar Kit - TJ Rear - Steel Arms - Bolt On Frame Bracket - Weld on Axle Mount Currie Enterprises Universal AntiRock Kit - 45 Inch Bar - W/20 Inch Bent Steel Arms
For 1997-2006 Jeep TJ's and Unlimited's. The Currie Antirock® Sway Bar Kit with aluminum arm option provides balanced performance of front and rear suspension for rugged off-road conditions as well as a light weight, trick looking aluminum arms. It gives the driver increased traction by balancing and distributing the weight and traction over all four tires. The Antirock® Off Road Sway Bar is designed to directly replace the stock Jeep sway bar and is an easy bolt on installation. The sway bar is made of SAE 4130 Heat-treated steel for ultimate strength. This is the same quality used in professional off-road competition sway bars. The Currie Antirock® Sway Bar does not need to be disconnected for off-road use. CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock setup.
This is the complete TJ/LJ bolt on rear Antirock sway bar kit. Kit is completely bolt on and includes all necessary hardware with the exception of the housing tabs which require welding to affix them to the housing. Kit includes the 45" sway bar, semi-gloss black powder coated bolt on frame brackets, sway bar bushings, adjustable heim jointed sway bar links, weld on housing tabs, and all necessary hardware. Detailed instructions included. Requires the minor welding of the housing tabs, and trimming of the rear inner wheel wells for sway bar arm travel.
Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 45" torsion bar length and 20" long steel arms that are bent for use in a Jeep TJ Wrangler or LJ Unlimited rear application. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 45" bar is a .800" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
Currie Enterprises universal AntiRock Kit - 36 Inch Bar - W/18 Inch Aluminum Arms Currie Enterprises universal AntiRock Kit - 36 Inch Bar - W/20 Inch Aluminum Arms Currie Enterprises universal AntiRock Kit - 36 Inch Bar - W/20 Inch Bent Aluminum Arms - For TJ Rear
Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 36" torsion bar length and 18" long aluminum arms. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 35.75" bar is a .750" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 36" torsion bar length and 20" long aluminum arms. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 36" bar is a .750" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 36" torsion bar length and 20" long aluminum arms with a 2" offset bend in them. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 36" bar is a .750" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
Currie Enterprises Universal AntiRock Kit - 45 Inch Bar - W/ 18 Inch Aluminum Arms Currie Enterprises Universal AntiRock Kit - 32.0 Inch Bar - W/18 Inch Aluminum Arms Currie Enterprises Universal AntiRock Kit - 45 Inch Bar - W/20 Inch Aluminum Arms
Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 45" torsion bar length and 18" long aluminum arms. Vertical links us0e a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 45" bar is a .800" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 32" torsion bar length and 18" long aluminum arms. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 32" bar is a .700" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 45" torsion bar length and 20" long aluminum arms. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 45" bar is a .800" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
Currie Enterprises Universal AntiRock Kit - 32.0 Inch Bar - W/20 Inch Aluminum Arms Currie Enterprises AntiRock Swaybar Kit - TJ Rear - Aluminum Arms - Bolt on Frame Bracket - Weld on Axle Mount Currie Enterprises Universal AntiRock Kit - 45 Inch Bar - W/20 Inch Bent Aluminum Arms
Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 32" torsion bar length and 20" long aluminum arms. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 32" bar is a .700" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.
This is the complete TJ/LJ bolt on rear Antirock sway bar kit. Kit is completely bolt on and includes all necessary hardware with the exception of the housing tabs which require welding to affix them to the housing. Kit includes the 45" sway bar, billaet aluminum arms, semi-gloss black powder coated bolt on frame brackets, sway bar bushings, adjustable heim jointed sway bar links, weld on housing tabs, and all necessary hardware. Detailed instructions included. Requires the minor welding of the housing tabs, and trimming of the rear inner wheel wells for sway bar arm travel.
Currie now offers Antirock® sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 45" torsion bar length and 20" long aluminum arms that are bent for use in a Jeep TJ Wrangler or LJ Unlimited rear application. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 45" bar is .800" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits
Currie Enterprises Universal AntiRock Kit - 45 Inch Bar - W/JK Front Aluminum Arms TJ/LJ 4-6” Lift Single-Rate Forged S/T Front Sway Bar System TJ/LJ 0-3” Lift Single-Rate Forged S/T Front Sway Bar System
This universal Antirock® sway bar kit. for those building their own custom rigs and rock buggies, features a 45" torsion bar length and 16" long bent aluminum arms. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 45" bar is .800" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits
The TeraFlex TJ S/T Swaybar System is the most advanced manual swaybar disconnect system available. With the easy engagement knob you can go from street to trail in seconds! The S/T swaybar gives you a heavy duty torsion bar for highway handling. When engaged in the "street" position it provides an extremely stable highway ride, and when disconnected the front axle is allowed unrestricted movement. The swaybar arm features several link mounting points to fine tune the torsion rate. Engagement and disengagement of the swaybar is simple as a twist of the knob - and you are on your way. Fits all TJ Wrangler models with 4"-6" of lift. Note: Wheels must have 4.5” or less backspacing.
The TeraFlex TJ S/T Swaybar System is the most advanced manual swaybar disconnect system available. With the easy engagement knob you can go from street to trail in seconds! The S/T swaybar gives you a heavy duty torsion bar for highway handling. When engaged in the "street" position it provides an extremely stable highway ride, and when disconnected the front axle is allowed unrestricted movement. The swaybar arm features several link mounting points to fine tune the torsion rate. Engagement and disengagement of the swaybar is simple as a twist of the knob - and you are on your way. Fits all TJ Wrangler models with 0"-3" of lift. Note: Wheels must have 4.5” or less backspacing.
TJ/LJ 4-6” Lift Dual-Rate Forged S/T Front Sway Bar System
The TeraFlex TJ Dual Rate S/T Swaybar System is the most advanced manual swaybar disconnect system available. With the easy engagement knob you can go from street to trail in seconds! The dual rate S/T swaybar gives you the best of both worlds with two integrated torsion bars, one for heavy duty highway handling and one tuned for off-road articulation. When engaged in the "street" position it provides an extremely stable highway ride, and when disconnected the "trail" mode provides balanced vehicle control reducing body sway and lean in sidehill and off camber situations while simultaneously allowing the suspension to fully cycle and articulate. The swaybar arm features several link mounting points to fine tune the torsion rate. Engagement and disengagement of the swaybar is simple as a twist of the knob - and you are on your way. Fits all TJ Wrangler models with 4"-6" of lift. Note: Wheels must have 4.5” or less backspacing. 2012+ JKs - Need the vacuum pump relocation kit Part #4403100