Currently viewing: HOME > Brands > SPOD


Sort By:
Page of 1
Spod Switch Legend - Stickers to Identify Switches sPOD Generation II, Bluetooth Remote Control Power Module - RCPM 2007 - 2008 JK 6 Switch sPOD & Source System
White Vinyl Weatherproof with matte laminate coating, solid black background with white lettering. 49 labels per sheet. The ultimate upgrade for the ultimate wiring upgrade! Add wireless control to your mobile device for your sPOD unit with just the click of an icon. The Remote Control Power Module (RCPM) installs in under a minute into Generation 2 sPOD units.

Each system includes the following:
All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:

  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
Mini Bezel kit for 2007-2008 JK ONLY 2009 - 2015 Jeep JK 6 Switch sPOD & Source System 2007 - 2008 JK 6 Switch sPOD & Source System w/ Genesis Adapter
Compatible with 2007 & 2008 JK Models
Will work in River Raider Off-Road Weld in Sport Cage

Each system includes the following:
All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
Each system includes the following:
All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:

  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
This panel includes the new Genesis adapter to allow you to install the Genesis G Screen.
G Screen not included.

Each system includes the following:

All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
2009 - 2015 JK 6 Switch sPOD & Source System w/ Genesis Adapter 2003 - 2006 Jeep TJ 6 Switch sPOD & Source System 2007 - 2008 JK 6 Switch w/ Air Gauge sPOD & Source System
This panel includes the new Genesis adapter to allow you to install the Genesis G Screen.
G Screen not included.

Each system includes the following:

All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
Each system includes the following:
All required mounting brackets and hardware. System will come pre-wired ready to install.

Included:
Switch panel, header, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch (Tyco) cube style relays (SPST 30amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
Each system includes the following:
All required mounting brackets and hardware. System will come pre-wired ready to install.

Included:
Switch panel, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.
Complete Air Gauge kit 0-200 psi Air Gauge w/Quick Release Camozzi fittings and 10' of high pressure connection line.All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
2009 - 2015 JK 6 Switch w/ Air Gauge sPOD & Source System 1997 - 2002 Jeep TJ 6 Switch sPOD & Source System w/ Air Gauge 2012 - 2015 JK model 6 Switch System with double LED light Contura rocker switches & Source System
Each system includes the following:
All required mounting brackets and hardware. System will come pre-wired ready to install.

Included:
Switch panel, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.
Complete Air Gauge kit 0-200 psi Air Gauge w/Quick Release Camozzi fittings and 10' of high pressure connection line.All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
Each system includes the following:
All required mounting brackets and hardware. System will come pre-wired ready to install.

Included:
Switch panel, header, six Contura switches, 2 Red, 2 Amber and 2 Green actuators (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch (Tyco) cube style relays (SPST 30amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
Each system includes the following:
All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Double light LED Contura switches (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers

Highlights of the dual LED option:

  • Gives the operator a choice of having a night lighted switch.
  • The lower lighted portion of the switch is fully controlled by the operator.
  • Prevents from tapping into the OEM electrics.
  • Choices of switch LED colors Red, Green, Blue and Amber.
  • No extra wiring required by the installer or customer.
  • The upper light still lights up only when the switch is in the on position.
  • LED's are much dimmer and less distracting
  • LED's draw much less current
  • LED's have a much longer life span than incandescent lights.
2007 - 2008 JK model 6 Switch System with double LED light Contura rocker switches sPOD & Source System 2007 -2008 JK 6 Switch sPOD w/ 2-1/16" Dia. Gauge hole 2009 - 2015 JK 6 Switch Dual LED sPOD & Source System
Each system includes the following:
All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Double light LED Contura switches (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers

Highlights of the dual LED option:

  • Gives the operator a choice of having a night lighted switch.
  • The lower lighted portion of the switch is fully controlled by the operator.
  • Prevents from tapping into the OEM electrics.
  • Choices of switch LED colors Red, Green, Blue and Amber.
  • No extra wiring required by the installer or customer.
  • The upper light still lights up only when the switch is in the on position.
  • LED's are much dimmer and less distracting
  • LED's draw much less current
  • LED's have a much longer life span than incandescent lights.


This panel does not include the new Genesis adapter to allow you to install the Genesis G Screen.
G Screen not included.

Each system includes the following:

All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six dual 24v LED Contura rocker switches and push button to turn bottom lights on and off (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
This panel does not include the new Genesis adapter to allow you to install the Genesis G Screen.
G Screen not included.

Each system includes the following:

All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six dual 24v LED Contura rocker switches and push button to turn bottom lights on and off (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
2009 -2015 JK 6 Switch Dual LED sPOD w/2-1/16" Dia. Gauge hole - Aeroforce Gauge Not included 2007 - 2008 w/Genesis Adapter and Double LED switches sPOD & Source System 2009 - 2015 w/Genesis Adapter and Double LED switches sPOD & Source System
This panel does not include the new Genesis adapter to allow you to install the Genesis G Screen.
G Screen not included.

Each system includes the following:

All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six dual 24v LED Contura rocker switches and push button to turn bottom lights on and off (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
This panel includes the new Genesis adapter to allow you to install the Genesis G Screen.
G Screen not included.

Each system includes the following:

All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six dual 24v LED Contura rocker switches and push button to turn bottom lights on and off (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
This panel includes the new Genesis adapter to allow you to install the Genesis G Screen.
G Screen not included.

Each system includes the following:

All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six dual 24v LED Contura rocker switches and push button to turn bottom lights on and off (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers
2012 - 2015 JK 6 Switch System with air gauge with double LED light Contura rocker switches & Source System 2007 - 2008 JK 6 Switch w/ Air Gauge and Dual LED switches sPOD & Source System 2009 - 2015 JK 6 Switch w/ Air Gauge and Double LED switches sPOD & Source System
Each system includes the following:
All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Double light LED Contura switches (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers

Highlights of the dual LED option:

  • Gives the operator a choice of having a night lighted switch.
  • The lower lighted portion of the switch is fully controlled by the operator.
  • Prevents from tapping into the OEM electrics.
  • Choices of switch LED colors Red, Green, Blue and Amber.
  • No extra wiring required by the installer or customer.
  • The upper light still lights up only when the switch is in the on position.
  • LED's are much dimmer and less distracting
  • LED's draw much less current
  • LED's have a much longer life span than incandescent lights.
Each system includes the following:
All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Double light LED Contura switches (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers

Highlights of the dual LED option:

  • Gives the operator a choice of having a night lighted switch.
  • The lower lighted portion of the switch is fully controlled by the operator.
  • Prevents from tapping into the OEM electrics.
  • Choices of switch LED colors Red, Green, Blue and Amber.
  • No extra wiring required by the installer or customer.
  • The upper light still lights up only when the switch is in the on position.
  • LED's are much dimmer and less distracting
  • LED's draw much less current
  • LED's have a much longer life span than incandescent lights.
Each system includes the following:
All required mounting brackets and hardware.
System will come pre-wired ready to install.

Included:
Switch panel, six Double light LED Contura switches (installed and pre-wired), two piece Wire Harness set with 8 multi color leads utilizing 18 gauge wires. Each end has an automotive connector made by Deutsch.

All wires are wrapped in high temp abrasion resistant nylon braided sleeving.

The Source 6 Circuit power distribution system includes:
  • 12 position terminal block for accessory attachment
  • 6 Bosch style cube style relays (SPST 40amp) (plug-in style)
  • 6 ATO style automotive fuses 3 15 amp and 3 30 amp supplied
  • 6 Diodes to protect sensitive accessories such as LED lights from "field collapse"
  • Inline 50amp manual resetting circuit breaker
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit that detects the battery voltage and will cut-off at 10.6VDC and cuts-back in at 12.4VDC so there is enough juice to start your vehicle in case you left an accessory on!!!
  • Fuse for LVCO which can be removed to bypass the LVCO
  • Mounting bracket for Jeep Wranglers

Highlights of the dual LED option:

  • Gives the operator a choice of having a night lighted switch.
  • The lower lighted portion of the switch is fully controlled by the operator.
  • Prevents from tapping into the OEM electrics.
  • Choices of switch LED colors Red, Green, Blue and Amber.
  • No extra wiring required by the installer or customer.
  • The upper light still lights up only when the switch is in the on position.
  • LED's are much dimmer and less distracting
  • LED's draw much less current
  • LED's have a much longer life span than incandescent lights.
SPOD - BANTAM W/ HD SMART CONTROLLER
The Bantam will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the Bantam's small footprint, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle's electrical system. It's the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.
NOTE!!! Bantam systems are not shipping international (outside the continental US), please check back with us.

FEATURES:
-High current capabilities (30 amps per circuit) with a maximum 100 amp capacity.
-Operates on 12VDC or 24VDC.
-Small footprint: 4.0"W x 4.0"L x 1.125"T (See side by side comparison to our Original 8-circuit system).
-Programmable functions for: Dimming, Strobe, Flash & Momentary.
-Switch linking (create a master switch to control other switches within the same panel).
-Flexibility to add multiple controller types such as: Touchscreen, HD smart controller, hard rocker switches and wirelessly using the Bantam app on a smart phone, tablet or any Bluetooth LE enabled device.
-Expandable up to 32 circuits that can be controlled with single touchscreen, or infinite number of circuits with use of additional controllers, limited only by the supplied power source.
-Ethernet cable interconnect with a 25' foot distance limitation.
-Fully programmable via free Bantam app.
-Current monitoring (via touchscreen and app).
-Protection against: Over current, over heat, short, reverse polarity protection, and field collapse.
-Low voltage detection circuit that will monitor battery voltage and shut system, and all accessories attached to it, off when battery voltage drops below 11.2VDC.
-Ignition control for two circuits (switches 1 and 2).
-Safety lock-out for two circuits (switches 1 and 2).
-16-position terminal block for end user connections (both ground and power).
-Removable dust cover with spots for legends and port identifications.
-Universal mount.
-8-position input terminal block for controlling outputs (3.3VDC - 24VDC inputs).

EXTERNAL CONTROLLER OPTIONS
-Third party switches
-Computers
-Arduino
-Raspberry Pi
-Alpine Audio systems KAC-001 head unit controller
-Sensors, thermostats, pressure switches, fan controllers & more
-
Perfect system for your Jeep Wrangler JL and many other vehicle types!
-
The primary reason for the Bluetooth integrated into the HD panel is for programming purposes, and not for remote control due to the limited range.
-HD housings are precision machined billet aluminum which contribute to the distance limitations.
-Ranges may vary from 5 feet up to 15 feet depending on location of the HD, the surroundings, phone type, phone cover and many other variables.