Currently viewing: HOME > Brands > ARTEC Industries
Mission statement:

Our mission is to provide world class aftermarket automotive parts to off-road enthusiasts. To break the mold on what has been done in our industry, redefine what performance is and add a level of design never before seen. We tirelessly exceed our customers’ expectations through every process, and win their trust though exceptional service.
Sort By:
Page of 1
Artec Industries JK Front Axle Truss ARTEC INDUSTRIES -JL NIGHTHAWK: FRONT SWAYBAR SKID Artec Industries JK Rear Axle Truss
This heavy duty and light weight truss system and armor is designed to take serious abuse and reinforce your front Dana 30 or Dana 44 JK axle. The 1/4" thick truss top and 10Ga. gusseting incorporates a unique design to strengthen both axle tubes, not just the long tube (commonly found in "other" designs). The precision cut and formed components of this setup ensure a hassle-free installation.

NOTE: This kit requires general welding and fabrication skills including welding to the cast center section. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is not liable for improper installation.
*Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required.
This Add-on skid protects the electronic sway bar disconnect under the front bumper as well as the factory frame extensions.

Made in the USA from 3/16" CNC laser cut and formed steel
Ships in bare steel to allow customizable color coordination*
Fully Welded to allow immediate bolt-on capability
Includes hardware
***Shown Painted for illustration. Items will arrive in bare Steel and may have minor imperfections which are typically covered with a textured coating. For smooth finishes extra preparation should be considered to achieve desired look***
Artec Industries is excited to announce the NEW Dana 44 JK Rear Axle Truss. This heavy duty truss system is designed to take serious abuse and reinforce your axle while also providing a flat surface to mount your upper control arms in a 4-link set up. The 1/4" thick truss top incorporates a unique design to strengthen both the axle and provide a low profile link mounting surface. The base truss itself spans about 26.5 inches across the center of your axle.
Artec Industries JK Front Axle ARMOR KIT ARTEC INDUSTRIES -JL FRONT BUMPER: NIGHTHAWK ARTEC INDUSTRIES -JL: NIGHTHAWK REAR BUMPER
This heavy duty and light weight truss system and armor is designed to take serious abuse and reinforce your front Dana 30 or Dana 44 JK axle. The 1/4" thick truss top and 10Ga. gusseting incorporates a unique design to strengthen both axle tubes, not just the long tube (commonly found in "other" designs).  The precision cut and formed components of this setup ensure a hassle-free installation. Made in the USA from 1/4", 3/16" and 1/8" CNC laser cut and formed steel. Winch plate made from 1/4" thick formed steel for supreme rigidity
The finishing touch to our Nighthawk JL Armor Line - Our Rear Bumper has the same hard lines as our FRONT BUMPER and tucks in high and tight to keep from dragging on the Trail.



Made in the USA from 3/16" CNC laser cut and formed steel

Internally gusseted for ultimate strength

High clearance design hugs factory frame for little loss of clearance or departure angle

3/4" thick high strength alloy steel frame brackets double as shackle mounts

Allows use of OEM backup sensors

Compatible with OEM hitch

High Clearance ends ensure you don't get hung up on rocks

Available in bare steel to allow customizable color coordination

Contoured to perfectly fit the subtle curves of your Jeep

***Shown Painted for illustration. Items will arrive in bare Steel and may have minor imperfections which are typically covered with a textured coating. For smooth finishes extra preparation should be considered to achieve desired look***
ARTEC INDUSTRIES -JL FRONT BUMPER: NIGHTHAWK W/ MID TUBE STINGER ARTEC INDUSTRIES -JL FRONT BUMPER: NIGHTHAWK W/ BLADE STINGER ARTEC INDUSTRIES - JL BELLYPAN: 4DOOR 3.6L STEEL
Keeping in line with our new Nighthawk Armor Products this bumper has the Artec Style you expect. In addition to the style cues, this bumper is tough and built to be extreme. Keeping in line with our new Nighthawk Armor Products this bumper has the Artec Style you expect. In addition to the style cues, this bumper is tough and built to be extreme
HEAVY DUTY STEEL SKID PLATES FOR ULTIMATE AND COMPLETE PROTECTION.

Artec Industries' NEW JL Bellypan is designed to give your 2018+ Jeep JLU Wrangler full protection underneath the vehicle. Designed using CAD files directly from the manufacturer, this belly pan skid plate ensures that you have a great fit with factory components. Made from 3/16" thick bare Steel skids and 3/16" zinc plated Steel brackets, and CNC cut and formed, the Artec JL Bellypan Kit offers the ultimate heavy strength solution for your new Jeep JLU.

At a total of 172 lbs, the total net weight is 96 lbs more than factory skids but much heavier duty and more complete coverage
Increases ground clearance of 3/4" from factory skids and even more compared to other aftermarket skid plates
3/16" bare Steel for skid plates (finishing required) and 3/16" zinc plated steel brackets*
Skid Plates are bare unfinished steel so you can choose your best finishing whether its powdercoating for a great look, truck bed liner for durability, or rattle can for easy touch ups*
Designed from factory CAD files for great and ultra precise fit.
CNC laser cut and CNC formed using custom rolled dies for high strength, unique look, and perfect contour fitment to OEM components.
All bolts under skid plate are countersunk for absolutely smooth bottom
All nuts are pressed into steel brackets for easy, one tool removal
Bolts directly to OEM T-case crossmember and frame using heavy duty flat head bolts that match OEM thread
No need for an aftermarket T-case crossmember for completely flat surface
Modular design lets you take off only one section for vehicle servicing
Protects Oil Pan, Transmission Pan, Gas Tank, Front Exhaust and Transfer Case
OEM gas tank skid is replaced for reduced weight and 3/4" higher clearance**
Artec Gas tank skid can be removed without dropping entire tank thanks to new additional cross-member and tank strap.
Clearance near rear drive yoke shaft to prevent rubbing
For a 44% reduction in weight, see our ALUMINUM BELLYPAN. 152 lbs (steel) vs 86 lbs (aluminum)
*SKID PLATES ARE BARE STEEL AND WILL RUST IF NOT FINISHED. DO NOT LEAVE UNFINISHED...PAINT IT AT LEAST. ARTEC IS NOT RESPONSIBLE FOR RUSTED PARTS. SOME SMALL MINOR SURFACE RUST MAY BE PRESENT WHEN RECEIVED.
**OEM gas tank skid removal required. For easiest install, remove skid when tank is near empty. See instructions for simple ideas on removing OEM gas tank skid.

NOTE: This product requires general mechanics skills and should only be installed by someone capable of using basic tools. Artec Industries is not responsible for incorrect installation. By purchasing, the customer agrees that they are fully responsible for correct installation.
Artec Industries JK Under Armor - Four door Bellypan Kit - JK1010 ARTEC INDUSTRIES - JL BELLYPAN: 4DOOR 3.6L ALUMINUM
JK UNDER ARMOR 4 Door Bellypan KIT

Artec Industries' NEW JK UNDER ARMOR is designed to give your 2007 - 2017 Jeep JK Wrangler full protection underneath the vehicle. Designed using CAD files directly from the manufacturer, this belly pan skid plate ensures that you have a great fit with factory components. Made from 1/4" thick 6061 Aluminum and 3/16" Zinc-plated Steel, and CNC cut and formed, the Artec JK Under Armor Kit offers both a strong and lightweight solution for the heavy Jeep JK.

  • 1/4" 6061 Aluminum for skid plates, 3/16" zinc plated steel for bracketry
  • Designed from factory CAD files for great and precise fit.
  • CNC laser cut and CNC formed using custom rolled dies for high strength and a unique look.
  • All bolts under skid plate are countersunk for absolutely smooth bottom*
  • All nuts are pressed into steel brackets for easy, one tool removal
  • Modular design lets you take off only one section for vehicle servicing
  • Protects Oil Pan, Transmission Pan, Gas Tank, Front Exhaust and Transfer Case
  • No removal of gas tank needed, simply bolt in place
  • Works best with Artec JK Heavy Duty Crossmembers*
  • Clearanced near rear drive yoke shaft to prevent rubbing

ALUMINUM SKID PLATES FOR HEAVY DUTY YET LIGHTWEIGHT PROTECTION.
At a total of 86 lbs, the total net weight is only 10 lbs more than factory skids but much heavier duty and more complete coverage.

Artec Industries' NEW JL Bellypan is designed to give your 2018+ Jeep JLU Wrangler full protection underneath the vehicle. Designed using CAD files directly from the manufacturer, this belly pan skid plate ensures that you have a great fit with factory components. Made from 1/4" thick 6061 Aluminum and 3/16" zinc plated Steel, and CNC cut and formed, the Artec JL Bellypan Kit offers both a strong and lightweight solution for your new Jeep JL.

Adds only 10 lbs to net weight of vehicle yet covers far more and is heavier duty than factory skids
86 lbs total weight compared to the Steel version at 153 lbs...a 44% weight savings
Increases ground clearance of 3/4" from factory skids and even more compared to other aftermarket skid plates
1/4" 6061 Aluminum for skid plates, 3/16" zinc plated steel brackets
Designed from factory CAD files for great and ultra precise fit.
CNC laser cut and CNC formed using custom rolled dies for high strength, unique look, and perfect contour fitment to OEM components.
All bolts under skid plate are countersunk for absolutely smooth bottom
All nuts are pressed into steel brackets for easy, one tool removal
Bolts directly to OEM T-case crossmember and frame using heavy duty flat head bolts that match OEM thread
No need for an aftermarket T-case crossmember for completely flat surface
Modular design lets you take off only one section for vehicle servicing
Protects Oil Pan, Transmission Pan, Gas Tank, Front Exhaust and Transfer Case
OEM gas tank skid is replaced for reduced weight and 3/4" higher clearance*
Artec Gas tank skid can be removed without dropping entire tank thanks to new additional cross-member and tank strap.
Clearance near rear drive yoke shaft to prevent rubbing
*OEM gas tank skid removal required. For easiest install, remove skid when tank is near empty. See instructions for simple ideas on removing OEM gas tank skid.

NOTE: This product requires general mechanics skills and should only be installed by someone capable of using basic tools. Artec Industries is not responsible for incorrect installation. By purchasing, the customer agrees that they are fully responsible for correct installation.