Currently viewing: HOME > Wrangler JK 2007-2018 > Driveline / Gears / Axles > Axle Trusses / Axle Brackets
Sort By:
Page of 1
JK Front Axle Bracket Sway Bar Mount TeraFlex JK Front Axle Bracket Shock Mount JK Rear CRD60 Axle Bracket Bumpstop Pad
The TeraFlex JK front CRD60 axle bracket swaybar mount is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one front swaybar mount and is designed for Dana 60 axles with 3" diameter axle tube. Welding is required. The TeraFlex JK front CRD60 axle bracket shock mount is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one front shock mount and is designed for Dana 60 axles with 3" diameter axle tube. Welding is required. The TeraFlex JK rear CRD60 axle bracket bumpstop pad is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one rear bumpstop pad and is designed for Dana 60 axles with 3" diameter axle tube. Welding is required.
TeraFlex JK Front Axle Bracket  Lower FlexArm - Driver JK/JKU CRD60 Rear Axle Bracket Coil Spring Pad - 3990070 JK Front Axle Bracket  Lower FlexArm - Passenger - 3990790
The TeraFlex JK front CRD60 axle bracket lower driver FlexArm mount is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one front lower FlexArm mount and is designed for Dana 60 axles with 3" diameter axle tube. Welding is required. The TeraFlex JK rear CRD60 axle bracket coil spring pad is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one rear coil spring pad and is designed for Dana 60 axles with 3" diameter axle tube. Welding is required. The TeraFlex JK front CRD60 axle bracket lower passenger FlexArm mount is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one front lower FlexArm mount and is designed for Dana 60 axles with 3" diameter axle tube. Welding is required.
JK Rear CRD60 Axle Bracket Upper Flexarm Mount - Driver - 3990051 JK Rear CRD60 Axle Bracket Upper Flexarm Mount - Passenger - 3990050 JK Front Axle Bracket Spring Pad - Driver - 3990771
The TeraFlex JK rear CRD60 axle bracket upper driver FlexArm mount is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one rear upper upper control arm mount (with integrated swaybar mount) and is designed for Dana 60 axles with 3" diameter axle tube. Welding is required. The TeraFlex JK rear CRD60 axle bracket upper passenger FlexArm mount is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one rear upper upper control arm mount (with integrated swaybar mount) and is designed for Dana 60 axles with 3" diameter axle tube. Welding is required.
The TeraFlex JK front CRD60 axle bracket driver coil spring pad is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one front driver coil spring pad and is designed for CRD60 axles (the mount bolts to the CRD60 housing top mounting pad). Welding is required.
JCR Offroad JK Dana 30 Axle Truss - Wrangler (2007-2018) - JKF-Truss-30 JCR Offroad JK Axle Gussets - Inner Knuckle Dana 30 or Dana 44 - Wrangler (2007-2018) - JKF-CG JK Front Axle Bracket Spring Pad - Passenger - 3990770

JK Axle Truss Kit Front Dana 30

JcrOffroad's Axle Truss kit allows for reinforcement of the factory axle housing.

  • CNC cut and formed from 3/16" steel.
  • Fits 07-16 Jeep Wrangler JK and JKU, equipped with Dana 30 front axle.
  • Weld on installation.
  • Includes JcrOffroad Sticker.
  • Hand built in the USA!

JK Axle Truss Kit Rear Dana 44

JcrOffroad's Axle Truss kit allows for reinforcement of the factory axle housing.

  • CNC cut and formed from 3/16" steel.
  • Fits 07-16 Jeep Wrangler JK and JKU Rubicon
  • Weld on installation.
  • Includes JcrOffroad Sticker.
  • Hand built in the USA!

The TeraFlex JK front CRD60 axle bracket passenger coil spring pad is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one front passenger coil spring pad and is designed for CRD60 axles (the mount bolts to the CRD60 housing top mounting pad). Welding is required.
TJ/LJ Dana 44/60 Rear Axle Track Bar Mount - 3990220 TeraFlex JK Rear CRD60 Axle Bracket Lower FlexArm & Shock Mount - Passenger - 3990090 JCR Offroad JK Dana 44 Axle Truss - Wrangler (2007-2018) - JKF-Truss-44
The TeraFlex TJ rear axle bracket trackbar mount is precision laser cut from 3/16" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one trackbar mount and is designed for Dana 44 or Dana 60 axles with 3" diameter axle tube. Welding is required. The TeraFlex JK rear CRD60 axle bracket lower passenger FlexArm mount is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one rear lower FlexArm mount and is designed for Dana 60 axles with 3" diameter axle tube. Welding is required.

JK Axle Truss Kit Front Dana 44

JcrOffroad's Axle Truss kit allows for reinforcement of the factory axle housing.

  • CNC cut and formed from 3/16" steel.
  • Fits 07-16 Jeep Wrangler JK and JKU Rubicon, equipped with Dana 44 front axle.
  • Weld on installation.
  • Includes JcrOffroad Sticker.
  • Hand built in the USA!

JK Rear CRD60 Axle Bracket  Lower FlexArm & Shock Mount- Driver - 3990091 JK CRD60 Front Axle Bracket Upper Flexarm Mount - Driver - 3990753 JCR Offroad JK Rear Dana 44 Axle Truss - Wrangler (2007-2018) - JKR-Truss-44
The TeraFlex JK rear CRD60 axle bracket lower driver FlexArm mount is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one rear lower FlexArm mount and is designed for Dana 60 axles with 3" diameter axle tube. Welding is required. The TeraFlex JK front CRD60 axle bracket upper driver FlexArm mount is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one front lower FlexArm mount and is designed for CRD60 axles (the mount bolts to the CRD60 housing top mounting pad). Welding is required.
JK Axle Truss Kit Rear Dana 44

JcrOffroad's Axle Truss kit allows for reinforcement of the factory axle housing.

  • CNC cut and formed from 3/16" steel.
  • Fits 07-16 Jeep Wrangler JK and JKU Rubicon
  • Weld on installation.
  • Includes JcrOffroad Sticker.
  • Hand built in the USA!
Teraflex JK Rear CRD60 Axle Bracket Track Bar Mount - 3990080 TeraFlex JK Front Axle Bracket Trackbar Mount TeraFlex JK CRD60 Front Axle Bracket Upper Flexarm Mount - Passenger
The TeraFlex JK rear CRD60 axle bracket trackbar mount is precision laser cut from 1/4" steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one rear trackbar mount and is designed for Dana 60 axles with 3" diameter axle tube. Welding is required. The TeraFlex JK front CRD60 axle bracket trackbar mount is precision laser cut from 1/4 steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one front trackbar mount and is designed for Dana 60 axles with 3" diameter axle tube. Welding is required. The TeraFlex JK front CRD60 axle bracket upper passenger FlexArm mount is precision laser cut from 1/4 steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one front upper FlexArm mount and is designed for Dana 60 axles with 3" diameter axle tube. Welding is required.
JK/JKU CRD60 Rear Axle Bracket Kit JK/JKU Tera60 Front Axle Bracket Kit
The TeraFlex JK rear CRD60 axle bracket kit includes all axle brackets necessary for a complete JK rear end. The brackets are precision laser cut from 1/4 steel and accurately formed to ensure proper positioning for correct suspension geometry. Sold as a complete kit, raw steel is ready for welding and paint or powder coating. This kit includes two lower coil spring pads, two lower control mounts, two upper control arm mounts (with integrated swaybar mounts), two shock mounts, and a trackbar mount. This axle kit is designed for Dana 60 axles with 3" diameter axle tube. Welding is required. The TeraFlex JK front CRD60 axle bracket kit includes all axle brackets necessary for a complete JK front end. The brackets are precision laser cut from 1/4 steel and accurately formed to ensure proper positioning for correct suspension geometry. Sold as a complete kit, raw steel is ready for welding and paint or powder coating. This kit includes two lower coil spring pads, two lower control mounts, two upper control arm mounts, two shock mounts, two swaybar link mounts, and a trackbar mount. This axle kit is designed for TeraFlex CR60 axles with 3" diameter axle tube. Welding is required.