Currently viewing: HOME > Wrangler JL 2018+ > Armor And Protection
B-Pillar Crossmember Plated Fuel Tanks
Rear Corner Armor Rocker Armor Roll Cages
Skid Plates Tailgate Plates
Sort By:
Page of 2
POISON SPYDER - JL TRAMP STAMP GENRIGHT JEEP JL TAILGATE PLATE AND LICENSE PLATE MOUNT ROCK-SLIDE ENGINEERING STEP SLIDER LIGHT KIT - SL-LK-LED
The Poison Spyder JL Tramp Stamp cleans up the appearance of the rear of the Jeep JL Wrangler, when running without a tailgate-mounted spare tire. It conceals the cabin air vents and spare tire mount bolt holes while providing a convenient place to re-mount the license plate. The Tramp Stamp is CNC laser cut from 1/8" aluminum plate, with a brake-formed offset to allow clearance for the tailgate vents to function properly. The JL Tramp Stamp features SpyderShell Armor Coat finish in semi-gloss black. Installation is simple, using the OE spare tire mount bolts.

Clean up the way the back of your Jeep looks with this tailgate plate for your 2018 Jeep JL from GenRight Off Road.

It simply covers the factory vent and relocates the rear license plate to the center of the rear door on the Jeep JL.

LED light strip allows for illumination of the RSE Step Slider.
ARTEC INDUSTRIES -JL NIGHTHAWK: FRONT SWAYBAR SKID ROCK HARD 4X4 FRONT SEAT HARNESS BAR FOR JEEP WRANGLER JL 4DR 2018 - CURRENT [RH-90703] ROCK HARD 4X4 REAR BENCH HARNESS BAR FOR JEEP WRANGLER JL 4DR 2018 - CURRENT [RH-90704]
This Add-on skid protects the electronic sway bar disconnect under the front bumper as well as the factory frame extensions.

Made in the USA from 3/16" CNC laser cut and formed steel
Ships in bare steel to allow customizable color coordination*
Fully Welded to allow immediate bolt-on capability
Includes hardware
***Shown Painted for illustration. Items will arrive in bare Steel and may have minor imperfections which are typically covered with a textured coating. For smooth finishes extra preparation should be considered to achieve desired look***
The RH4x4 Jeep bolt-in Sport Cage is the cornerstone of Rock Hard 4x4 products. Developed first for the Jeep Wrangler TJ and proven after years and years of trail use and abuse - the RH4x4 bolt-in Sports Cage has become one of the most popular safety upgrades in the Jeep aftermarket industry.
Please Note: Test fitting is required prior to powder coating / paint. While we make every effort to insure the highest quality parts arrive for install, Rock Hard 4x4 cannot be held liable for any coating expenses on cage components.

The RH4x4 Jeep bolt-in Sport Cage is the cornerstone of Rock Hard 4x4 products. Developed first for the Jeep Wrangler TJ and proven after years and years of trail use and abuse - the RH4x4 bolt-in Sports Cage has become one of the most popular safety upgrades in the Jeep aftermarket industry.

The Why - Factory Design Complications
The Wrangler JL almost didn't come to market with solid axles. Weight was a major factor in determining if the Wrangler would sacrifice off road capability for fuel mileage standards. In the end, and what we have today, is a Wrangler attempting to both satisfy regulations and maintain its heritage. To save weight, and save solid axles, the JL engineers installed a very light weight, very thin wall (14 gauge), very body-integrated cage system.

To strengthen this lighter cage, the engineers produced an extremely hardened, odd shaped tubular design. In developing our Cage Brace System, we broke virtually every drill bit in our building. The tubing is unlike any material Jeep has ever used, certainly in the occupant safety realm. The shape requires a new way to install a Cage Brace System, and a back to the drawing board approach for us. After a fully year of research and development, we're proud to release our innovative design.

Installation
We promised we'd innovate a no-weld design, and we've done it. Our Cage Brace System strengthens the weak/vulnerable points in the OEM JL cage plus adds functionality. Our System does require some special tools, but does not require welding.

Drilling - The new factory cage material, while only 14 gauge, is hardened. It takes a very slow (300 RPM ideal, 500 RPM max) drill process and a special hardened cobalt drill bit to penetrate. Your big box store drill bits will not work. The die grinder tree will help you remove burs and finish out the holes. You aren't required to purchase, but may very well need, an additional Drill Bit Pack.
GENRIGHT OFF ROAD JEEP WRANGLER JL FENDER DELETE KIT - FRONT - TFF-10620 GENRIGHT OFF ROAD JEEP WRANGLER JL FENDER DELETE KIT - REAR - TFR-10620 ROCK HARD 4X4 3RD ROW / ACCESSORY MOUNT SPORT CAGE FOR JEEP WRANGLER JL 4DR 2018 - CURRENT [RH-90705]
This is the 0" ALUMINUM or "NO" flare option from GenRight Off Road for the all new Jeep Wrangler JL

Sold as a set of 2 (Front).

These are perfect for rock crawling through the Boulders or Trees on your favorite trail.

Want to go with bigger tires? They are perfect!

FEATURES:
  • Made of lightweight & durable 6061 Aluminum alloy.
  • Fits all 2 and 4 door JL's (2018 to Current).
  • Bolts on in same location as stock flare.
  • 0" wide flare (stock is 4" wide).
  • Bigger wheel opening (up and rearward) to prevent tire rubbing.
  • 1/8" thick laser cut and CNC bent plate.
  • Includes new hardware.
  • Retains your stock inner fender well (if you want).
  • Includes detailed installation instructions.
  • 100% made in USA!
NOTES:
  • This product is sold as a SET, 2 front plates.
  • Sold un-painted.
  • LED Side marker light kits are also available.
  • Installation requires minor drilling of the factory mounting holes.
  • Check your local laws if you intend to run these on the street before purchase.
This is the 0" ALUMINUM or "NO" flare option from GenRight Off Road for the all new Jeep Wrangler JL

Sold as a set of 2 (Rear).

These are perfect for rock crawling through the Boulders or Trees on your favorite trail.

Want to go with bigger tires? They are perfect!

FEATURES:
  • Made of lightweight & durable 6061 Aluminum alloy.
  • Fits all 2 and 4 door JL's (2018 to Current).
  • Bolts on in same location as stock flare.
  • 0" wide flare (stock is 4" wide).
  • Bigger wheel opening (up and rearward) to prevent tire rubbing.
  • 1/8" thick laser cut and CNC bent plate.
  • Includes new hardware.
  • Retains your stock inner fender well (if you want).
  • Includes detailed installation instructions.
  • 100% made in USA
NOTES:
  • This product is sold as a pair, 2 Rear plates.
  • Sold un-painted.
  • LED Side marker light kits are also available.
  • Installation requires minor drilling of the factory mounting holes.
  • Check your local laws if you intend to run these on the street before purchase.
The RH4x4 Jeep bolt-in Sport Cage is the cornerstone of Rock Hard 4x4 products. Developed first for the Jeep Wrangler TJ and proven after years and years of trail use and abuse - the RH4x4 bolt-in Sports Cage has become one of the most popular safety upgrades in the Jeep aftermarket industry.
ROUGH COUNTRY JEEP WHEEL TO WHEEL FABRICATED STEPS (2018 WRANGLER JL UNLIMITED | 4-DOOR) ROUGH COUNTRY JEEP WHEEL TO WHEEL NERF STEPS (2018 WRANGLER JL 4-DOOR) Rugged Ridge Spartan Nerf Bars, Textured Black; 18-18 Jeep Wrangler JLU, 4 Door - 11596.04
JEEP WHEEL TO WHEEL FABRICATED STEPS (2018 WRANGLER JL UNLIMITED | 4-DOOR) JEEP WHEEL TO WHEEL NERF STEPS (2018 WRANGLER JL 4-DOOR) Rugged Ridge Spartan Nerf Bars are the ideal solution for JL owners looking for a little help climbing into their lifted Jeep without sacrificing that aggressive off-road attitude. Spartan Nerf Bars feature a 3-inch OD primary tube that fits in a higher position than conventional tube steps offering a cleaner look, while patented drop-down step hoops at each door gives you firm footing for easy entry & exit. Constructed from .084 wall steel tubing and finished with a durable 3-stage textured powder coat, Rugged Ridge Spartan Nerf Bars are designed with the strength and enduring good looks that your Jeep demands. Includes all necessary installation hardware and installation instructions.
ROCK HARD 4X4 BOLT-IN ULTIMATE SPORT CAGE BRACE KIT FOR JEEP WRANGLER JL 2/4DR 2018 - CURRENT [RH-90700] ROCK HARD 4X4 - PATRIOT SERIES TUBE SLIDERS Smittybilt Stryker Front Bumper - 76730 - JK or JL
The RH4x4 Jeep bolt-in Sport Cage is the cornerstone of Rock Hard 4x4 products. Developed first for the Jeep Wrangler TJ and proven after years and years of trail use and abuse - the RH4x4 bolt-in Sports Cage has become one of the most popular safety upgrades in the Jeep aftermarket industry.

Rock Hard 4x4 is very proud to offer the heaviest duty and easiest to install bolt-on tubular rock sliders for the Jeep Wrangler JL 4DR.

The RH4x4 Jeep JL 4DR Tubular Rock Sliders are the ultimate rocker guard upgrade for wheelers of all skill levels. All the benefits of the low profile factory Rubicon rails plus a welded on tubular step that not only makes entry and exit from your Jeep easier, it also helps keep your body panels off the rocks!

Innovation and originality make these a world class body armor upgrade. 100% Made in the USA and an undisputed reputation as a game changer - meet the RH4x4 Tubular Rocker Guard set.

Functional Design
These bolt on just like your Rubicon sliders but give you much more capability both on and off the trail. Each mounting bar is 2" x 3" .120 thick steel making them indestructible rock crushers. We then set them in a jig and weld on 1 3/4" .120 tubing giving you a step you don't know how you lived without. The tube also helps keep your Jeep off the rocks by giving you a steel "cushion" that takes all the abuse the trail can throw at them.

Each slider's end cap is welded shut to prevent debris, water, and dirt from getting inside.

Ease of Installation
The secret behind our system's ease of install is precise fitment. We mount not just to your body's pinch seam like "import" versions of tubular rails, we also mount to your body bolts with tabs over 3 times the factory width plus through the floor of your JL in existing holes. This means more mounting points for a stronger, rattle free, and exact fitting rock rail. Included in every hardware pack are shims that also allow for our heavy duty hardware to perfectly align your sliders underneath your Jeep for a look that can't be beat by "one size misfits all" imports.

What comes in every kit:
Driver and Passenger side Tubular Rocker Guards
Hardware
Installation Instructions

Three Reasons Why:
Ease of installation
Thickness and strength
Unmatched quality and fitment



FAQ:
Is any welding required?
No. Our Rocker Guards are a bolt-on install.

Commonly asked dimensions:
Door outwards to top of rail: xxx" (step out distance)
Distance from bottom of door cutout to top of rail: xxx" (step down distance)
Distance from rectangular rail to top of tube: xxx" (distance tube sticks up from top of rail)

Body lift compatible?
No.

Why don't we simply mount "around" my OEM Rubicon rails?
To mount around your Rubicon rails we'd have to eliminate our welded in studs along the sides of our rails. This would greatly lessen their mounting strength and ability to distribute load along the rail. We choose to replace your Rubicon rail completely so we can mount in more places along your Jeep's body.

Is any trimming required to the OEM fenders prior to Tubular Rocker Guard installation?
No. You do not have to trim your OEM fenders at all for clearance. Some other competing sliders require trimming up to 5/8" of an inch off your plastic fenders.

What finish is available?
RH4x4 Rocker Guards ship powder coated black with a semi-smooth, semi-gloss finish. Raw, paintable finish available upon request.

Where is this Rocker Guard set made?
This product, like all RH4x4 parts, was designed, developed, tested, manufactured, and if applicable, powder coated, and shipped in the USA. And we don't mean the 75% legal standard to be able to say Made in USA. We are 100% Made in the United States of America!
  • 18-Current Wrangler JL, 2 & 4 Door
  • 07-Current Wrangler JK, 2 & 4 Door
  • 3mm deep drawn formed steel
  • Winch compatible up to 12k
  • Modular wings sold separately
  • Integrated d-ring and lift points
  • OE fog light provision
  • Integrated overrider with 13" lightbar provision
LOD OFFROAD - 2018+ JEEP JL SIGNATURE SERIES ROCK SLIDERS ARTEC INDUSTRIES -JL FRONT BUMPER: NIGHTHAWK ARTEC INDUSTRIES -JL: NIGHTHAWK REAR BUMPER
The ultimate bolt-on rock rails are now available for your JL! They are built to take a beating, easily supporting the weight of the vehicle. These sliders bolt directly into the frame, with additional optional drill and bolt points available on the mounts. Each rail mounts in three different locations. These feature a 1-3/4" tube running the length of the rail for extra protection or use as a small step. The main structure of the slider is constructed of 2" square tube for maximum rigidity. The top of the sliders also feature an integrated step plate with tread dimples at each door location. For more photos please click the link to view the gallery. Ordering a quantity of one will be one pair of sliders (one passenger, one driver).
Made in the USA from 1/4", 3/16" and 1/8" CNC laser cut and formed steel. Winch plate made from 1/4" thick formed steel for supreme rigidity
The finishing touch to our Nighthawk JL Armor Line - Our Rear Bumper has the same hard lines as our FRONT BUMPER and tucks in high and tight to keep from dragging on the Trail.



Made in the USA from 3/16" CNC laser cut and formed steel

Internally gusseted for ultimate strength

High clearance design hugs factory frame for little loss of clearance or departure angle

3/4" thick high strength alloy steel frame brackets double as shackle mounts

Allows use of OEM backup sensors

Compatible with OEM hitch

High Clearance ends ensure you don't get hung up on rocks

Available in bare steel to allow customizable color coordination

Contoured to perfectly fit the subtle curves of your Jeep

***Shown Painted for illustration. Items will arrive in bare Steel and may have minor imperfections which are typically covered with a textured coating. For smooth finishes extra preparation should be considered to achieve desired look***
MOTOBILT JEEP JL FRONT BUMPER W/STINGER 18+ WRANGLER JL THE HAMMER SERIES MOTOBILT JEEP JL FRONT BUMPER W/BULL BAR CRUSHER 2018-PRESENT WRANGLER JL MOTOBILT JEEP JL FRONT BUMPER WITH SKID PLATE 18+ WRANGLER JL W/FOG LIGHT HOLES THE HAMMER SERIES
Motobilt now offers the Jeep JL Hammer Stinger front bumper with fog light holes. It features DOM steel tube stinger and built in provisions for factory style fog lights. The Motobilt Jeep JL Front Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA. The Motobilt Jeep Wrangler JL Crusher recessed winch bumper with bull bar will provide you the ultimate in protection and recovery. The bumper allows you to secure your winch down low in between the frame rails. The winch bolt pattern will accept multiple style winches up to a Warn Zeon.
Motobilt now offers the Jeep JL Hammer front bumper with skid plate and fog light holes. It features built in provisions for factory style fog lights and the skid plate is laser cut from 3/16 inch P and O steel and formed on a press brake. The Motobilt Jeep JL Front Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA. Our JL Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JL. The bumper will fit all 2018 and newer models of the Jeep JL 2 door and 4 door JL Unlimited. The front d-ring mounts are CNC cut from 3/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.

The Hammer bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JL Hammer bumper has bolt holes for a recovery winch.

Features:
  • Jeep JL Hammer 48.5 inch front bumper wth skid plate.
  • Fits 2018 and newer Jeep JL 2 door and 4 door JL Unlimited
  • Fabricated from 3/16 inch thick high strength steel plate
  • Bolt on design
  • 3/4 inch thick steel d-ring mounts
  • Pass through d-ring mounts weld to the bumper
  • Included Fog Light Holes
  • Pre-installed riv nuts for 10-24 screws for the factory fog lights
  • Made in the USA
  • Sold as each

Note:
  • If installing a winch, MB1002 fairlead mount will also need to purchased. See Related Parts.
  • Motobilt bumpers ship bare steel, paint or powdercoat needed before use.
  • No cutting required on the frame rails on your Jeep JL
  • LED fog light NOT included, but sold separately.
JCR JL Front Bumper Mauler Stubby 2018 Jeep Wrangler ARTEC INDUSTRIES -JL FRONT BUMPER: NIGHTHAWK W/ MID TUBE STINGER ARTEC INDUSTRIES -JL FRONT BUMPER: NIGHTHAWK W/ BLADE STINGER
JcrOffroad's Mauler Front Winch bumper is designed for those looking maximum clearance and an uninhibited approach angle for the Jeep Wrangler JL. Keeping in line with our new Nighthawk Armor Products this bumper has the Artec Style you expect. In addition to the style cues, this bumper is tough and built to be extreme. Keeping in line with our new Nighthawk Armor Products this bumper has the Artec Style you expect. In addition to the style cues, this bumper is tough and built to be extreme
MOTOBILT JEEP JL FRONT BUMPER W/STINGER/SKID PLATE 18+ WRANGLER JL THE HAMMER SERIES METALCLOAK - UNDERCLOAK INTEGRATED ARMOR SYSTEM FOR JL WRANGLER 4DOOR/3.6 MOTOR GenRight Off Road JEEP JL (2018) ULTRA CLEARANCE LO-PRO WINCH GUARD FRONT BUMPER - ALUMINUM - FBB-10355
Motobilt now offers the Jeep JL Hammer Stinger front bumper with skid plate and fog light holes. It's a Fact... the New Jeep JL Wranglers need underside protection - the MetalCloakUnderCloak Integrated Boat-Sided Armor & Skid Plate System is just what it needs.

Not just a couple of cut pieces of steel bolted to the bottom of a Jeep, the GOLD zinc platedUnderCloak Armor is a complete formed system that covers from front to back and includes...

  • Boat-Sided Gas Tank Skid Plate
  • Maximum Approach Oil Pan Skid Plate
  • Boat-Sided Transfer Case Skid Plate
The CAD designed, CNC formed, laser cut 7 gauge steel sets the benchmark for strength and the GOLD zinc plating not only looks great, but it forms a molecular bond to the steel protecting your UnderCloak from the elements.

Note: Currently only test fitted for 3.6 engine configuration


GOLD ZINC & BOAT-SIDED? YEP!

Boat Sided For Clearance...

Every edge of the UnderCloak Armor System is designed for maximum approach and departure angles leaving the possibility of hanging up on obstacles on the trail a thing of the past.

GOLD Zinc For Durability...

By treating the UnderCloak Armor System with a GOLD Zinc finish, you are protected from the elements when you do scratch it up. And the surface is paintable if you want to go custom.

But why not recessed bolt holes?

When products are new they fit just fine... now go bash them on the trail and see how they line up, they don't!

In critical areas for attachment that can get misaligned we have encapsulated the head of the bolts with skid guard washers for the bolt head that protects and affords slotted holes to ease re-installation when servicing your Jeep.



Dividing Line
FULLY INTEGRATED ARMOR...
The UnderCloak Armor System Combines multiple 7 gauge steel pieces to protect the underside of your Jeep JL Wrangler .This product provides protection for:

  1. Oil Pan & Motor Skid
  2. Transmission & Transfer Case
  3. Gas Tank
Cross Member
This is the all new GenRight Off Road Ultra Hi-clearance front bumper for the Jeep Wrangler JL (2018)
ARTEC INDUSTRIES - JL BELLYPAN: 4DOOR 3.6L STEEL ROCK HARD 4X4 - COMPLETE BELLYPAN SKID PLATE SYSTEM WITH DUAL CROSSMEMBERS FOR JEEP WRANGLER JL 4DR 3.6L 2018 - CURRENT RH-90509 ADDICTIVE DESERT DESIGNS | 2018 JEEP WRANGLER JL ROCK SLIDERS
HEAVY DUTY STEEL SKID PLATES FOR ULTIMATE AND COMPLETE PROTECTION.

Artec Industries' NEW JL Bellypan is designed to give your 2018+ Jeep JLU Wrangler full protection underneath the vehicle. Designed using CAD files directly from the manufacturer, this belly pan skid plate ensures that you have a great fit with factory components. Made from 3/16" thick bare Steel skids and 3/16" zinc plated Steel brackets, and CNC cut and formed, the Artec JL Bellypan Kit offers the ultimate heavy strength solution for your new Jeep JLU.

At a total of 172 lbs, the total net weight is 96 lbs more than factory skids but much heavier duty and more complete coverage
Increases ground clearance of 3/4" from factory skids and even more compared to other aftermarket skid plates
3/16" bare Steel for skid plates (finishing required) and 3/16" zinc plated steel brackets*
Skid Plates are bare unfinished steel so you can choose your best finishing whether its powdercoating for a great look, truck bed liner for durability, or rattle can for easy touch ups*
Designed from factory CAD files for great and ultra precise fit.
CNC laser cut and CNC formed using custom rolled dies for high strength, unique look, and perfect contour fitment to OEM components.
All bolts under skid plate are countersunk for absolutely smooth bottom
All nuts are pressed into steel brackets for easy, one tool removal
Bolts directly to OEM T-case crossmember and frame using heavy duty flat head bolts that match OEM thread
No need for an aftermarket T-case crossmember for completely flat surface
Modular design lets you take off only one section for vehicle servicing
Protects Oil Pan, Transmission Pan, Gas Tank, Front Exhaust and Transfer Case
OEM gas tank skid is replaced for reduced weight and 3/4" higher clearance**
Artec Gas tank skid can be removed without dropping entire tank thanks to new additional cross-member and tank strap.
Clearance near rear drive yoke shaft to prevent rubbing
For a 44% reduction in weight, see our ALUMINUM BELLYPAN. 152 lbs (steel) vs 86 lbs (aluminum)
*SKID PLATES ARE BARE STEEL AND WILL RUST IF NOT FINISHED. DO NOT LEAVE UNFINISHED...PAINT IT AT LEAST. ARTEC IS NOT RESPONSIBLE FOR RUSTED PARTS. SOME SMALL MINOR SURFACE RUST MAY BE PRESENT WHEN RECEIVED.
**OEM gas tank skid removal required. For easiest install, remove skid when tank is near empty. See instructions for simple ideas on removing OEM gas tank skid.

NOTE: This product requires general mechanics skills and should only be installed by someone capable of using basic tools. Artec Industries is not responsible for incorrect installation. By purchasing, the customer agrees that they are fully responsible for correct installation.
Fits 2018 - Current Jeep Wrangler JL models.

JL Skid Plates
The Jeep Wrangler JL brings many upgrades over the best-selling 2007 - 2018 JK, but also has it's own unique undercarriage short-comings. It lacks any skid plates! A selling feature of the JL is also a hint at a major flaw: the suspension capabilities and increase fender flare clearance require less lift to increase tire size. This means wheelers can install larger tires and tackle tougher trails without having to install a traditional suspension lift kit. Less lift means more dragging your undercarriage and drivetrain all over the rocks.

Belly-Pan Design
To help you make it to the end of the trail, we're offering our most comprehensive and largest skid plate system we've ever designed. This is a true "belly pan" system that protects all your vital drivetrain components. The new JL 8-speed transmission drives fantastic, but is very long and pushes your drivetrain further back underneath your rig. To protect your transmission and transfer case, we had to increase the size of our skid plates. This is where our "belly pan" design gets to work. From frame rail to frame rail and oil pan to exhaust resonator, our design is comprehensive and complete.

Dual Crossmembers
Jeep had a brilliant idea to make the JL frame rails out of a new harder material, but trail testing has exposed a major flaw: thinner walls but stronger material twists! Early in 2018's Easter Jeep Safari exposed major flexing and twisting in rigs coming back off their day's runs. To prevent this plus strengthen our larger skid plates, we include 2 new 1" by 2" thick steel crossmembers. These CNC machined crossmembers extend from driver to passenger side frame rails and not only give our skid plates the foundation they need to protect your drivetrain, but also take twist and flex out of your frame.

Complete Skid Plate System
Oil Pan / Transmission Skid Plate
Transfer Case Skid Plate
Resonator Skid Plate
Fuel Tank Skid Plate
Dual 1" x 2" Steel Crossmembers
Tapered Washers
Hardware

Features
3/16" thick plate steel
100% bolt-on design
Dual 1" thick x 2" wide steel crossmembers
Powder coat included
All hardware included
Exclusive tapered bolt head protecting washers
Exclusive oil change access door

Specifications
Steel Skid System Weight: xx lbs.

Components
Laser cut oil change access door.


NOT LONG ARM SUSPENSION COMPATIBLE

Addictive Desert Designs' Jeep Wrangler JL Rock Slider side steps are built with function in mind. The bottom of the step is a smooth plate of 3/16" steel providing your Jeep Wrangler with protection in the most extreme conditions. Bolting directly to the vehicle's body mounts give the Jeep JL Rock Sliders extra strength over the OEM steps while also allowing our rocker guards to cover more of your underbody.
Each rock slider includes accommodations for additional lighting for your Wrangler. Five provided rock light mounts per step are universal and can mount any brand of rock light. Lights are aimed to allow the driver to brighten important parts of the trail that are otherwise hard to see. As always, these Jeep Wrangler Rock Sliders are fully bolt-on and made in America.