Currently viewing: HOME > Wrangler JL 2018+ > Armor And Protection > Rocker Armor
Sort By:
Page of 1
ROCK-SLIDE ENGINEERING STEP SLIDER LIGHT KIT - SL-LK-LED ROUGH COUNTRY JEEP WHEEL TO WHEEL FABRICATED STEPS (2018 WRANGLER JL UNLIMITED | 4-DOOR) ROUGH COUNTRY JEEP WHEEL TO WHEEL NERF STEPS (2018 WRANGLER JL 4-DOOR)
LED light strip allows for illumination of the RSE Step Slider.
JEEP WHEEL TO WHEEL FABRICATED STEPS (2018 WRANGLER JL UNLIMITED | 4-DOOR) JEEP WHEEL TO WHEEL NERF STEPS (2018 WRANGLER JL 4-DOOR)
Rugged Ridge Spartan Nerf Bars, Textured Black; 18-18 Jeep Wrangler JLU, 4 Door - 11596.04 ROCK HARD 4X4 - PATRIOT SERIES TUBE SLIDERS LOD OFFROAD - 2018+ JEEP JL SIGNATURE SERIES ROCK SLIDERS
Rugged Ridge Spartan Nerf Bars are the ideal solution for JL owners looking for a little help climbing into their lifted Jeep without sacrificing that aggressive off-road attitude. Spartan Nerf Bars feature a 3-inch OD primary tube that fits in a higher position than conventional tube steps offering a cleaner look, while patented drop-down step hoops at each door gives you firm footing for easy entry & exit. Constructed from .084 wall steel tubing and finished with a durable 3-stage textured powder coat, Rugged Ridge Spartan Nerf Bars are designed with the strength and enduring good looks that your Jeep demands. Includes all necessary installation hardware and installation instructions.

Rock Hard 4x4 is very proud to offer the heaviest duty and easiest to install bolt-on tubular rock sliders for the Jeep Wrangler JL 4DR.

The RH4x4 Jeep JL 4DR Tubular Rock Sliders are the ultimate rocker guard upgrade for wheelers of all skill levels. All the benefits of the low profile factory Rubicon rails plus a welded on tubular step that not only makes entry and exit from your Jeep easier, it also helps keep your body panels off the rocks!

Innovation and originality make these a world class body armor upgrade. 100% Made in the USA and an undisputed reputation as a game changer - meet the RH4x4 Tubular Rocker Guard set.

Functional Design
These bolt on just like your Rubicon sliders but give you much more capability both on and off the trail. Each mounting bar is 2" x 3" .120 thick steel making them indestructible rock crushers. We then set them in a jig and weld on 1 3/4" .120 tubing giving you a step you don't know how you lived without. The tube also helps keep your Jeep off the rocks by giving you a steel "cushion" that takes all the abuse the trail can throw at them.

Each slider's end cap is welded shut to prevent debris, water, and dirt from getting inside.

Ease of Installation
The secret behind our system's ease of install is precise fitment. We mount not just to your body's pinch seam like "import" versions of tubular rails, we also mount to your body bolts with tabs over 3 times the factory width plus through the floor of your JL in existing holes. This means more mounting points for a stronger, rattle free, and exact fitting rock rail. Included in every hardware pack are shims that also allow for our heavy duty hardware to perfectly align your sliders underneath your Jeep for a look that can't be beat by "one size misfits all" imports.

What comes in every kit:
Driver and Passenger side Tubular Rocker Guards
Hardware
Installation Instructions

Three Reasons Why:
Ease of installation
Thickness and strength
Unmatched quality and fitment



FAQ:
Is any welding required?
No. Our Rocker Guards are a bolt-on install.

Commonly asked dimensions:
Door outwards to top of rail: xxx" (step out distance)
Distance from bottom of door cutout to top of rail: xxx" (step down distance)
Distance from rectangular rail to top of tube: xxx" (distance tube sticks up from top of rail)

Body lift compatible?
No.

Why don't we simply mount "around" my OEM Rubicon rails?
To mount around your Rubicon rails we'd have to eliminate our welded in studs along the sides of our rails. This would greatly lessen their mounting strength and ability to distribute load along the rail. We choose to replace your Rubicon rail completely so we can mount in more places along your Jeep's body.

Is any trimming required to the OEM fenders prior to Tubular Rocker Guard installation?
No. You do not have to trim your OEM fenders at all for clearance. Some other competing sliders require trimming up to 5/8" of an inch off your plastic fenders.

What finish is available?
RH4x4 Rocker Guards ship powder coated black with a semi-smooth, semi-gloss finish. Raw, paintable finish available upon request.

Where is this Rocker Guard set made?
This product, like all RH4x4 parts, was designed, developed, tested, manufactured, and if applicable, powder coated, and shipped in the USA. And we don't mean the 75% legal standard to be able to say Made in USA. We are 100% Made in the United States of America!
The ultimate bolt-on rock rails are now available for your JL! They are built to take a beating, easily supporting the weight of the vehicle. These sliders bolt directly into the frame, with additional optional drill and bolt points available on the mounts. Each rail mounts in three different locations. These feature a 1-3/4" tube running the length of the rail for extra protection or use as a small step. The main structure of the slider is constructed of 2" square tube for maximum rigidity. The top of the sliders also feature an integrated step plate with tread dimples at each door location. For more photos please click the link to view the gallery. Ordering a quantity of one will be one pair of sliders (one passenger, one driver).
ADDICTIVE DESERT DESIGNS | 2018 JEEP WRANGLER JL ROCK SLIDERS GENRIGHT OFF ROAD JEEP JL (2018) 4 DOOR ROCKER GUARDS - STEEL - RCG-10070 GENRIGHT OFF ROAD JEEP JL (2018) 4 DOOR STEP ROCKER GUARDS - STEEL - RCG-10060
Addictive Desert Designs' Jeep Wrangler JL Rock Slider side steps are built with function in mind. The bottom of the step is a smooth plate of 3/16" steel providing your Jeep Wrangler with protection in the most extreme conditions. Bolting directly to the vehicle's body mounts give the Jeep JL Rock Sliders extra strength over the OEM steps while also allowing our rocker guards to cover more of your underbody.
Each rock slider includes accommodations for additional lighting for your Wrangler. Five provided rock light mounts per step are universal and can mount any brand of rock light. Lights are aimed to allow the driver to brighten important parts of the trail that are otherwise hard to see. As always, these Jeep Wrangler Rock Sliders are fully bolt-on and made in America.
These are "real" rock sliders (aka: rocker guards) for the New 2018 Jeep JL.

They will protect one of the most vulnerable spots on your vehicle, and the sleek design is made to give up the minimal amount of ground clearance.

Our Rocker Guards provide the highest ground clearance and strength on the market.

This is a great upgrade for anyone looking for maximum protection on their JL.

Features:
  • Heavy Duty .250" thick wall DOM steel tubing provides superior structure and strength.
  • Angled slider bar is designed to protect the body.
  • Wraps all the way under to tie into the frame with plates to distribute the load.
  • Full coverage from front to rear (protects the flares too) .
  • Smooth "Boatside" tubing will not get hung up on trail obstacles.
  • Will work with metal tube flares or the factory plastic flares.
  • Sold in pairs (left & right).
  • Can be bolted on or welded on.
  • Includes bolt-on mounting hardware.
  • Shipped un-painted, but can be powder coated as an option.
  • Made in the USA!

Notes:
  • Installation requires drilling 12 small holes in (or welded on) the frame per side.
These are "real" rock sliders (aka: rocker guards) for the new 2018 Jeep JL.
They will protect one of the most vulnerable spots on your vehicle, and the sleek design is made to give up the minimal amount of ground clearance.
Our Rocker Guards provide the highest ground clearance and strength on the market.
This is a great upgrade for anyone looking for maximum protection on their JL.

Features:
  • Heavy Duty .250" (1/4") thick wall DOM steel tubing provides superior structure and strength.
  • Angled slider bar is designed to protect the body.
  • Wraps all the way under to tie into the frame with plates to distribute the load.
  • Full coverage from front to rear (protects the flares too) .
  • Dimple Die step provides superior traction and makes entry and exit easy.
  • Will work with metal tube flares or the factory plastic flares.
  • Sold in pairs (left & right).
  • Can be bolted on or welded on.
  • Includes bolt-on mounting hardware.
  • Shipped un-painted, but can be powder coated as an option.
  • Made in the USA!

Notes:
  • Installation requires drilling and tapping 12 small holes (or they can be welded on) in the frame per side.
ROCK-SLIDE ENGINEERING JL UNLIMITED 4 DOOR STEP SLIDERS GenRight Off Road JEEP WRANGLER JL ROCKER GUARDS - ALUMINUM - RCG-10104
Our NO-DRILL FACTORY BOLT ON INSTALL is here!

Our steps have been updated to make them quicker, quieter, and stronger along with a completely factory mounting install. With an all new designed motor, a larger step, added interior gussets, and redesigned arms make this step the most functional power step on the market!

- FACTORY MOUNT INSTALL!

- NO DRILLING REQUIRED FOR STEP SLIDER INSTALL.

- NO NUTSERTS REQUIRED.

Behind the step aluminum bumpstop, which adheres with VHB double sided adhesive, disperses any forces against the entire side of your vehicle if you hit the step instead of damaging the body.

- Functional step incorporated into a functional rock slider that deploys when the door is opened.

- Trail rated to 5 and below. Trails 5 and above require additional Skid Plates (AX-SS-SP-JL4 Sold Separately)

- Step can hold up to 650 LBS and feature a 12" drop when deployed.

- CNC laser cut from 11 gauge steel.

- Full pinch seam protection.

- Made in the USA.

- Powder coated textured black.

Rocker guard sold separately. AX-SS-RG-JL4. Not required for install.
GenRight off Road's all new Aluminum Rocker Guards for the Jeep Wrangler JL.

These lightweight rocker guards incorporate a step and the sleek design is curved to match the body of the Jeep.

This Rocker Guard provides the highest ground clearance on the market, thanks to unique internal "ribs" which gusseting the entire structure for unrivaled support.

This is a great upgrade for anyone looking for maximum protection and a functional step on their JL.

Features:
  • Lightweight 3/16" 6061-T6 Aluminum is laser cut and CNC formed for a precise fit.
  • Highest ground clearance on the market (hangs no lower than the body and is tapered up).
  • 3 piece design ties into multiple points on the Jeep (including the body mounts).
  • Unique internal bracing provides superior structure and strength.
  • Contoured to fit the shape of the JL's curved body.
  • Wraps all the way under to the frame where it ties to the body mounts
  • Full coverage from front to rear (protects the flares too)
  • Smooth "Boatside" tapered style will not get hung up on trail obstacles
  • Will work with metal tube flares or the factory plastic flares
  • Shape design acts as a nice 4" wide step for the vehicle occupants
  • Sold in pairs (left & right)
  • Includes all new Stainless Steel mounting hardware
  • Shipped un-painted, but can be painted or powder coated (or left raw; the aluminum will not rust)
  • Made in the USA
  • *Don't forget to add our "Rash Guards" (RCG-8204) for extra durability in the high impact areas!

Notes:
  • Installation requires drilling of the "Kick Plate" in mounting locations.
  • We recommend adding grip tape where necessary for better foot traction during entry and exit.
  • If still running the factory plastic flares, these rockers will require trimming about 5/8" off the bottom of the factory flares.
  • Will not work with body lifts (attaches to the bottom of the body mount bolts).
  • We also offer a more heavy duty option for the guy wheeling hard (Steel version RCG-) if you're extra hard on your rig.
  • We also offer matching B-pillar protection (ACC-).