Currently viewing: HOME > Wrangler JL 2018+ > Lift Kits and Suspension > Track Bars
Sort By:
Page of 1
Steer Smarts YETI XD JL/JLU Stabilizer Relocation Bracket (Axle Side) - 79029001 JL/JLU Front Track Bar Axle Bracket Kit (4.5” Lift) JL/JLU 2.5-4” Lift Rear Track Bar Bracket Kit - Axle End - 1953600
The YETI XD JL steering stabilizer relocation bracket was engineered to relocate your JL steering stabilizer mounting location from the tie rod to the front of the track bar mount. You will need this bracket if you are sticking with a bottom mount draglink and are upgrading to our YETI XD Tie Rod.
The TeraFlex JL/JLU 4" Lift Front Track Bar Drop Bracket Kit corrects steering geometry on JL Wrangler and JLU Wrangler Unlimited models with 4" lift kits to eliminate bump steer and other front-end issues. Bolt-on bracket mounts to the front axle.

Fits:

  • JL Wrangler (2-door)
  • JLU Wrangler Unlimited (4-door)

Specs:

  • Lift Height: 4"

Includes:

  • Front track bar bracket
  • Front track bar bracket spacer
  • All necessary hardware
The TeraFlex JL/JLU 2.5-4" Lift Rear Track Bar Bracket Kit corrects vehicle roll center, restores factory handling, and reduces body roll in lifted JL Wrangler and JLU Wrangler Unlimited models.

Multiple mounting locations allows neutral lateral alignment of the rear axle on JL/JLU models with 2.5-4" lifts. Bolt-on bracket mounts to the rear axle.

Fits:
  • JL Wrangler (2-door)
  • JLU Wrangler Unlimited (4-door)

Specs:
  • Lift Height: 2.5-4"

Includes:
  • Rear track bar bracket w/ multiple track bar mounting holes
  • Rear track bar bracket spacer
  • All necessary hardware

Note:
  • Drilling is required.
Steer Smarts YETI XD JL/JLU Track Bar Relocation Bracket - 79022001 STEER SMARTS YETI XD™ JL/JLU ADJUSTABLE FRONT TRACK BAR - 75040001 Teraflex JL/JLU: Alpine IR Front Track Bar - Adjustable (0-6" Lift) - 1753420
The YETI XD Track Bar relocation bracket is designed to correct the geometry of the track bar on Jeep Wrangler JL's that are equipped with a top-mounted draglink. This easy bolt-on solution will ensure that the track bar and top mounted dragline are proper alignment and aid in the reduction of bump steer. The YETI XD Track Bar relocation bracket is fabricated from 1/4" steel and E-coated for maximum durability. It includes all necessary hardware and installs in just minutes with basic hand tools.


TRACK BAR RELOCATION BRACKET:

  • Easy bolt-on installation.
  • E-coated for a long lasting appearance under harsh conditions.
  • Engineered for proper clearance to other chassis components to eliminate interferences.
  • Fabricated from 1/4" Steel for greater buckling, impact, and fatigue strength.
  • Designed to correct Track Bar geometry on Wrangler JL's equipped with a Top Mount Draglink.
  • Includes all necessary installation hardware.
  • MADE IN THE USA

The YETI XD Track Bar relocation bracket fits all left hand drive 2018+ JL/JLU Wrangler models equipped with a 3" or greater lift and running at least a 2.75" bump stop.

The YETI XD Adjustable Track Bar is fully adjustable on the vehicle and is designed to be the strongest track bar available for the Jeep Wrangler JL.


FEATURES
ADJUSTABLE TRACK BAR:
  • Easy bolt-on installation.
  • E-coated and powder coated for a long lasting appearance under harsh conditions.
  • Engineered for proper clearance to other chassis components to eliminate interferences.
  • Forged from 2" Steel for greater buckling, impact, and fatigue strength.
  • Designed to correct Track Bar geometry on the Jeep Wrangler JL
  • Fully adjustable on vehicle
  • Includes all necessary installation hardware.
  • MADE IN THE USA
The YETI XD Track Bar fits left hand drive 2018 to Current JL/JLU Wranglers.

The front axle experiences tremendous amounts of lateral force while turning and those effects increase exponentially during off-road driving. The TeraFlex JL/JLU: Alpine IR Front Track Bar withstands these abusive side loads to drastically improve steering response and handling. It also allows lateral adjustment of the axle for proper axle alignment as well as cycling through full suspension travel without interfering with other components.

Fits:

  • JL Wrangler (2-door)
  • JLU Wrangler Unlimited (4-door)
  • 0-6" Lift

Includes:

  • Alpine IR Front Track Bar
  • Preinstalled IR Joints - both ends

Features & Benefits:

  • Bolts into factory track bar brackets
  • Can also be used w/ a Front Track Bar Axle Bracket (2.5-3.5" Lift: # 1953250 or 4.5" Lift: 1953500) no cutting or welding required
  • Adjustable end features an improved turn-buckle design w/ built-in clamp and alignment feature for a hassle-free install and length adjustment
  • Adjustable from 0.5" shorter than stock to 1" longer than stock
  • Heat treated alloy steel fractured race spherical bearings at both ends for superior wear resistance w/ OEM-style rubber boots to maximize longevity and aid in smooth, quiet operation
  • Unique backbone/reinforced rib for additional strength and rigidity