Currently viewing: HOME > Wrangler JL 2018+ > Bumpers > Rear Bumpers
Sort By:
Page of 1
GENRIGHT LED LICENSE PLATE LIGHT W/LONG HARNESS ARTEC INDUSTRIES -JL: NIGHTHAWK REAR BUMPER LOD OFFROAD - 2018+ JL DESTROYER SHORTY REAR BUMPER
This is a universal LED License light that cleanly mounts behind your rear license plate (that is necessary tto be legal on the street).

Designed to be used when running LED tail lights which eliminate the normal license plate light (off the corner of the Jeep).
The finishing touch to our Nighthawk JL Armor Line - Our Rear Bumper has the same hard lines as our FRONT BUMPER and tucks in high and tight to keep from dragging on the Trail.



Made in the USA from 3/16" CNC laser cut and formed steel

Internally gusseted for ultimate strength

High clearance design hugs factory frame for little loss of clearance or departure angle

3/4" thick high strength alloy steel frame brackets double as shackle mounts

Allows use of OEM backup sensors

Compatible with OEM hitch

High Clearance ends ensure you don't get hung up on rocks

Available in bare steel to allow customizable color coordination

Contoured to perfectly fit the subtle curves of your Jeep

***Shown Painted for illustration. Items will arrive in bare Steel and may have minor imperfections which are typically covered with a textured coating. For smooth finishes extra preparation should be considered to achieve desired look***
New Jeep Wrangler Destroyer Shorty Bumpers are engineered to a higher level. The stealthy look and versatile functionality makes a bold statement while protecting and enhancing your off road Jeep on the trail. The increased features allow you to customize your Jeep like never before! The rear bumper has been upgraded with light bezels which allow easy light change out by removing a few screws. The Destroyer rear bumpers fit round 4" lights, Rigid D-flush mount, and Rigid D series LED lighting by switch out the bezels. Orders with no lights will receive blank bezels to fill the light housing cavity. The Destroyer rear bumper will work with the factory tire carrier and fits up to a 35" tire comfortably. Optional Tire Riser Mounts can be used to fit larger tire sizes with factory carrier. The tow hitch receiver is built into the rear bumper and is tow rated the same as the factory. (3500 Lbs.) Better look, higher quality, and more options!

Note: Tire Carriers can Not be Added to rear bumper only orders later!

New Features Include:

-New enhanced Destroyer bumper design with less catch points
-Fits 35" inch tire with factory Jeep carrier
-Riser mount available for 37" inch tires with factory carrier
-New enhanced light bezel design that prevents mud build up and easy to change lighting options
-Accommodates round or square Rigid LED lighting options
-Stronger high strength/ light weight military grade steel
-More tire clearance
-Built-in replacement tow hitch receiver (Tow rated same as stock 3500 Lbs.)

Note: Bumper is shown with upgraded attachments which are Not included in the listed base pricing. All weights are of the bumper only with no options included.
LOD OFFROAD - 2018+ JL DESTROYER FULL-WIDTH REAR BUMPER ROCK HARD 4X4 - PATRIOT SERIES MID-WIDTH FRONT BUMPER W/ RECESSED WINCH PLATE (2018 JL WRANGLER) ADDICTIVE DESERT DESIGNS | 2018 JEEP WRANGLER JL STEALTH FIGHTER REAR BUMPER
New Jeep Wrangler Destroyer Full-Width Bumpers are engineered to a higher level. The stealthy look and versatile functionality makes a bold statement while protecting and enhancing your off road Jeep on the trail. The increased features allow you to customize your Jeep like never before! The rear bumper has been upgraded with light bezels which allow easy light change out by removing a few screws. The Destroyer rear bumpers fit round 4" lights, Rigid D-flush mount, and Rigid D series LED lighting by switch out the bezels. Orders with no lights will receive blank bezels to fill the light housing cavity. The Destroyer rear bumper will work with the factory tire carrier and fits up to a 35" tire comfortably. Optional Tire Riser Mounts can be used to fit larger tire sizes with factory carrier. The tow hitch receiver is built into the rear bumper and is tow rated the same as the factory. (3500 Lbs.) Better look, higher quality, and more options!

Note: Tire Carriers can Not be Added to rear bumper only orders later!

New Features Include:

-New enhanced Destroyer bumper design with less catch points
-Fits 35" inch tire with factory Jeep carrier
-Riser mount available for 37" inch tires with factory carrier
-New enhanced light bezel design that prevents mud build up and easy to change lighting options
-Accommodates round or square Rigid LED lighting options
-Stronger high strength/ light weight military grade steel
-More tire clearance
-Built-in replacement tow hitch receiver (Tow rated same as stock 3500 Lbs.)

Note: Bumper is shown with upgraded attachments which are Not included in the listed base pricing. All weights are of the bumper only with no options included.
ROCK HARD 4X4 PATRIOT SERIES MID-WIDTH FRONT BUMPER W/ LOWERED WINCH PLATE 2018 JEEP WRANGLER JL STEALTH FIGHTER REAR BUMPER
ADDICTIVE DESERT DESIGNS | 2018 JEEP WRANGLER JL STEALTH FIGHTER TIRE CARRIER LOD OFFROAD - 2018+ JL DESTROYER SHORTY REAR BUMPER + TIRE CARRIER LOD OFFROAD - 2018+ JL DESTROYER SHORTY REAR BUMPER + TIRE CARRIER
2018 JEEP WRANGLER JL STEALTH FIGHTER TIRE CARRIER New Jeep Wrangler Destroyer Shorty Bumpers with Tire Carrier are engineered to a higher level. The stealthy look and versatile functionality makes a bold statement while protecting and enhancing your off road Jeep on the trail. The increased features allow you to customize your Jeep like never before! The rear bumper has been upgraded with light bezels which allow easy light change out by removing a few screws. The Destroyer rear bumpers fit round 4" lights, Rigid D-flush mount, and Rigid D series LED lighting by switch out the bezels. Orders with no lights will receive blank bezels to fill the light housing cavity. All Destroyer Carriers come with high end industrial tapered roller bearings at the hinge point to decrease friction and wear. This allows effortless carrier operation like never before. The Destroyer Carrier has way more options. Fits your Jerry cans or RotoPax gas can like previous designs, but now you can easily adjust the gas cans up and down the carrier with a full 14" inches of adjustment. Trail rack has been upgraded with more adjustment to accommodate over-sized tire setups. The new Destroyer carrier design creates a door linked and non-door linked style setup in one. The linked carrier design is equipped with a one hand quick release push button to disconnect the carrier instantly. This makes it easier then ever to access or remove your carrier accessories. With more room on the carrier, we added more options. As a result, we created several new carrier attachments from full adjustable gas cans to a universal multimounting system that allows you to attach axes, shovels, and more. Better look, higher quality, and more options!

Note: 55 Watt Halogen Light kits is required if selecting 4" round light for your rear bumper!

New Features Include:

-New enhanced carrier design, allows linked and non door linked operations in one
-Fits 40" inch tire with no Gas can mount or 37" inch tire with gas can mounts
-New enhanced carrier industrial tapered roller bearing at hinge point
-New enhanced light bezel design that prevents mud build up and easy to change lighting options
-Accommodates round or square LED lighting options
-Stronger high strength/ light weight military grade steel
-Fully adjustable gas can mounts
-Easier access and removal of carrier attachments
-More tire clearance
-New Universal Mount options
-New Vertical Hi-Lift Jack Mount options
-Enhanced rock crawling bumper design (less catch points)
-Built-in replacement tow hitch receiver (Tow rated same as stock 3500 Lbs.)

Note: Bumper is shown with upgraded attachments which are Not included in the listed base pricing. All weights are of the bumper and carrier only with no options included.

New Jeep Wrangler Destroyer Full-Width Bumpers with Tire Carrier are engineered to a higher level. The stealthy look and versatile functionality makes a bold statement while protecting and enhancing your off road Jeep on the trail. The increased features allow you to customize your Jeep like never before! The rear bumper has been upgraded with light bezels which allow easy light change out by removing a few screws. The Destroyer rear bumpers fit round 4" lights, Rigid D-flush mount, and Rigid D series LED lighting by switch out the bezels. Orders with no lights will receive blank bezels to fill the light housing cavity. All Destroyer Carriers come with high end industrial tapered roller bearings at the hinge point to decrease friction and wear. This allows effortless carrier operation like never before. The Destroyer Carrier has way more options. Fits your Jerry cans or RotoPax gas can like previous designs, but now you can easily adjust the gas cans up and down the carrier with a full 14" inches of adjustment. Trail rack has been upgraded with more adjustment to accommodate over-sized tire setups. The new Destroyer carrier design creates a door linked and non-door linked style setup in one. The linked carrier design is equipped with a one hand quick release push button to disconnect the carrier instantly. This makes it easier then ever to access or remove your carrier accessories. With more room on the carrier, we added more options. As a result, we created several new carrier attachments from full adjustable gas cans to a universal multimounting system that allows you to attach axes, shovels, and more. Better look, higher quality, and more options!

New Features Include:

-New enhanced carrier design, allows linked and non door linked operations in one
-Fits 40" inch tire with no Gas can mount or 37" inch tire with gas can mounts
-New enhanced carrier industrial tapered roller bearing at hinge point
-New enhanced light bezel design that prevents mud build up and easy to change lighting options
-Accommodates round or square LED lighting options
-Stronger high strength/ light weight military grade steel
-Fully adjustable gas can mounts
-Easier access and removal of carrier attachments
-More tire clearance
-New Universal Mount options
-New Vertical Hi-Lift Jack Mount options
-Enhanced rock crawling bumper design (less catch points)
-Built-in replacement tow hitch receiver (Tow rated same as stock 3500 Lbs.)

Note: Bumper is shown with upgraded attachments which are Not included in the listed base pricing. All weights are of the bumper and carrier only with no options included.

GENRIGHT JEEP JL (2018) SWING OUT REAR TIRE CARRIER & BUMPER PACKAGE (ALUMINUM)
Save 10% when purchased as a package!

This Aluminum Swing-Out Rear Tire Carrier and Aluminum Rear Bumper Package for the all new Jeep Wrangler JL (2018) is constructed from 6061-T6 Aluminum Alloy.

The sleek design opens and closes effortlessly, and the unique 4-point design is urethane mounted to make it completely rattle-free.


Tire Carrier Features:
  • 1-3/4" diameter x .188" thick wall 6061-T6 Aluminum Alloy tubing.
  • 4-point polyurethane mounting is rattle-free and will not open by itself.
  • Carrier independent from the rear bumper.
  • Swing out tube style carrier cage design opens effortlessly.
  • Mounts to factory rear door hinges (strong & rattle-free).
  • 100% TIG welded Aluminum .
  • Designed to hold from a 35" up to a 42" tire.
  • Fits any bolt pattern or wheel offset (stock wheels must be put in carrier backwards).
  • Corrosion-resistant materials require no paint.
  • Fits tighter to the rear tailgate than any other brand rear tire carrier.
  • Improves vehicles rear departure angle.
  • License plate is re-located to center mount on tire carrier.
  • Pre-drilled to pull license plate and 3rd brake light wiring through the tubes.
  • Can be painted, powder coated, or left raw.
  • Made in the USA.

Bumper Features:
  • 100% TIG welded (as pictured)!
  • Super light weight at only 20lbs!
  • Laser cut and CNC formed, heavy duty 3/16" Aluminum Alloy.
  • Mounts flush the rear frame (less than 3" behind the body!)
  • Includes a small integrated small entry step below rear door.
  • Improves departure angle over stock bumper.
  • Can still be used with factory 2" receiver hitch.
  • Completely independent of the rear tire carrier.
  • Made in the USA!
  • Easy to install.

Notes:
  • Sold un-painted. The finish can be left "natural", painted or powder coated.
  • Requires drilling of four 3/8" holes on drivers side to mount the two latch plates.
  • Requires that the factory rear door hinges be removed so new GenRight hinges can be installed (no new holes required).
  • Works with factory style tail lights (as pictured).
  • Stop-Lock (RTC-3890) normally an extra $120, is now included!