Currently viewing: HOME > Wrangler JL 2018+ > Brakes
Brake Calipers Brake Lines Brake Pads
Brake Rotors
Sort By:
Page of 1
Universal 1-Hole Front Brake Line Anchor Kit Teraflex JL/JLU - JK/JKU: Delta Brake Kit - Front & Rear - 8x6.5" Bolt Pattern - 4403480 Teraflex JL/JLU_JK/JKU: Delta Brake Kit - Front & Rear - 5x5" Bolt Pattern - 4403450
The Universal 1-Hole Front Brake Line Anchor Kit properly locates your front brake line for safe tire clearance during full suspension movement. The secure mounting eliminates unnecessary movement of the flexible brake line and ABS/wheel speed sensor.
FITS:
  • Universal

INCLUDES:
  • Brake line anchors - pair
  • UV resistant nylon cable ties w/ stainless steel gripper - 8 pack

FEATURES & BENEFITS:
  • Stainless-steel anchor can be bent & positioned for specific clearance & location
  • Molded rubber construction securely & safely retains brake line
  • Molded rubber also features a recessed channel for vehicle speed sensor wire
  • Utilizes lower shock mount bolt for easy installation

NOTE:
  • Universal 5-Hole Brake Line Anchor Kit (# 1101356) also available to fit most vehicles.
This item ships for free! (Continental U.S. only)
The TeraFlex JL/JLU_JK/JKU: Delta Brake Kit is the ultimate upgrade for JL/JLU and JK/JKU Wrangler models with oversized and heavier wheels/tire combos requiring increased braking performance. A must for 33-42" tires or heavy-laden overland rigs. Includes all the components required to upgrade both front and rear axles.
Modulus measures a material's resistance to elastic (recoverable) deformation under load. A stiff material has a high modulus, which means it only changes shape slightly under high elastic loads before returning to its normal shape. The Delta Brake Calipers features a high-modulus bridge.
Fits:
  • JL Wrangler (2-door)
  • JLU Wrangler Unlimited (4-door)
  • JK Wrangler (2-door)
  • JKU Wrangler Unlimited (4-door)
  • Minimum Wheel Diameter: 17"
  • Back Spacing: 4.5" or less
- MUST VERIFY FITMENT W/ DOWNLOADABLE TEMPLATE
  • Bolt Pattern: 8x6.5"

Includes:
  • High-Modulus Brake Caliper Kit w/ pads- front (# 4403401)
  • High-Modulus Brake Caliper Kit w/ pads - rear (# 4403402)
  • 14" x 1.25" vented & slotted rotors w/ 8x6.5" bolt pattern - front (# 4403485)
  • 14" x 1.25" vented & slotted rotors w/ 8x6.5" bolt pattern - rear (# 4403486)
  • All necessary hardware

Features & Benefits:
  • Significantly improved braking performance over factory brake system
  • Balanced front to rear brakes tuned specifically for lifted vehicles
  • Brake bias & piston sizes optimized for Wrangler
  • Designed to work w/ stock proportioning valve & ABS
  • 100% bolt-on upgrade for easy installation

Front & Rear Calipers:
  • Opposed 4-piston caliper design w/ 2" pistons
  • Same flow rate as factory 2-piston calipers - 4 pistons move each side half the distance instead of 2 pistons only moving one side the full distance
  • EPDM synthetic boot material keeps water & other contaminants away from piston
  • Hard-chrome coating on piston reduces friction to improve performance
  • 4-piece High-Modulus bridge caliper design combines heat-treated 4140 forged steel bridges w/ T6 6061 forged aluminum piston housings
  • Steel bridges resist bending/flex better than standard aluminum or cast iron
  • Improved stiffness = consistent brake feel/modulation during brake application & release
  • Low-profile bridge accepts 14" diameter rotors behind 17" wheels
  • 1,000-hour salt spray tested zinc-& E-dipped coating on bridges & mounts
  • 300,000 psi steel formed hardware
  • Calipers feature built-in auto bleeding check ball, valve, & spring for easy bleeding
  • Hard-coat anodized, scratch-resistant piston bores

Front & Rear Brake Rotors:
  • Massive 14" x 1.25" vented rotors for superior stopping performance
  • Larger diameter rotors offer more mechanical advantage for more stopping power
  • Heat-treated, heavy cast-iron rotors offer better heat absorption
  • Mill-balanced, vented rotors for maximum heat dissipation
  • Included slotted rotors offer better gas dissipation than smooth rotors
  • GEOMET coating on non-friction surfaces resists corrosion
  • Rotors feature 8x6.5" bolt pattern

Front & Rear Brake Pads:
  • Proprietary composite-resin, semi-metallic pads provide excellent full temperature stopping power for maximum initial speed scrub w/ increased pad life & reduce noise & dust
  • Drop-in pad design - no need to disassemble calipers to replace pads

Stock Brake Rotor Reference:
JL/JLU Sport front: 12.9" x 0.94" (330mm x 24mm) vented rotors
JL/JLU Sport rear: 12.9" x 0.47" (328mm x 12mm) solid rotors
JL/JLU Sahara/Rubicon front: 12.9" x 1.1" (330mm x 28mm) vented rotors
JL/JLU Sahara/Rubicon rear: 13.4" x 0.55" (342mm x 14mm) solid rotors
JK/JKU front: 11.9" x 1.1" (302mm x 28mm) vented rotors (U.S.-spec)
JK/JKU rear: 11.9" x 1.1" (302mm x 28mm) vented rotors (U.S.-spec)

Note(s):
  • Requires a minimum wheel diameter of 17".
  • On JK/JKU models, we recommend upgrading the stock master cylinder and brake booster to the Mopar Master Cylinder & Brake Booster Kit (# P5160050). Contact your Mopar dealer for availability.
  • JL/JLU_JK/JKU: Delta Brake Kit - Front & Rear - 5x5" Bolt Pattern (# 4403450) also available.
This item ships for free! (Continental U.S. only)
The TeraFlex JL/JLU_JK/JKU: Delta Brake Kit is the ultimate upgrade for JL/JLU and JK/JKU Wrangler models with over-sized and heavier wheels/tire combos requiring increased braking performance. A must for 33-42" tires or heavy-laden overland rigs. Includes all the components required to upgrade both front and rear axles.
Modulus measures a material's resistance to elastic (recoverable) deformation under load. A stiff material has a high modulus, which means it only changes shape slightly under high elastic loads before returning to its normal shape. The Delta Brake Calipers features a high-modulus bridge.

Fits:
  • JL Wrangler (2-door)
  • JLU Wrangler Unlimited (4-door)
  • JK Wrangler (2-door)
  • JKU Wrangler Unlimited (4-door)
  • Minimum Wheel Diameter: 17"
  • Back Spacing: 4.5" or less
- MUST VERIFY FITMENT W/ DOWNLOADABLE TEMPLATE
  • Bolt Pattern: 5x5"

Includes:
  • High-Modulus Brake Caliper Kit w/ pads - front (# 4403401)
  • High-Modulus Brake Caliper Kit w/ pads - rear (# 4403402)
  • 14" x 1.25" vented & slotted rotors w/ 5x5" bolt pattern - front (# 4403455)
  • 14" x 1.25" vented & slotted rotors w/ 5x5" bolt pattern - rear (# 4403456)
  • All necessary hardware

Features & Benefits:
  • Significantly improved braking performance over factory brake system
  • Balanced front to rear brakes tuned specifically for lifted vehicles
  • Brake bias & piston sizes optimized for Wrangler
  • Designed to work w/ stock proportioning valve & ABS
  • 100% bolt-on upgrade for easy installation

Front & Rear Calipers:
  • Opposed 4-piston caliper design w/ 2" pistons
  • Same flow rate as factory 2-piston calipers - 4 pistons move each side half the distance instead of 2 pistons only moving one side the full distance
  • EPDM synthetic boot material keeps water & other contaminants away from piston
  • Hard-chrome coating on piston reduces friction to improve performance
  • 4-piece High-Modulus bridge caliper design combines heat-treated 4140 forged steel bridges w/ T6 6061 forged aluminum piston housings
  • Steel bridges resist bending/flex better than standard aluminum or cast iron
  • Improved stiffness = consistent brake feel/modulation during brake application & release
  • Low-profile bridge accepts 14" diameter rotors behind 17" wheels
  • 1,000-hour salt spray tested zinc-& E-dipped coating on bridges & mounts
  • 300,000 psi steel formed hardware
  • Calipers feature built-in auto bleeding check ball, valve, & spring for easy bleeding
  • Hard-coat anodized, scratch-resistant piston bores

Front & Rear Brake Rotors:
  • Massive 14" x 1.25" vented rotors for superior stopping performance
  • Larger diameter rotors offer more mechanical advantage for more stopping power
  • Heat-treated, heavy cast-iron rotors offer better heat absorption
  • Mill-balanced, vented rotors for maximum heat dissipation
  • Included slotted rotors offer better gas dissipation than smooth rotors
  • GEOMET coating on non-friction surfaces resists corrosion
  • Rotors feature 5x5" bolt pattern

Front & Rear Brake Pads:
  • Proprietary composite-resin, semi-metallic pads provide excellent full temperature stopping power for maximum initial speed scrub w/ increased pad life & reduce noise & dust
  • Drop-in pad design - no need to disassemble calipers to replace pads

Stock Brake Rotor Reference:
JL/JLU Sport front: 12.9" x 0.94" (330mm x 24mm) vented rotors
JL/JLU Sport rear: 12.9" x 0.47" (328mm x 12mm) solid rotors
JL/JLU Sahara/Rubicon front: 12.9" x 1.1" (330mm x 28mm) vented rotors
JL/JLU Sahara/Rubicon rear: 13.4" x 0.55" (342mm x 14mm) solid rotors
JK/JKU front: 11.9" x 1.1" (302mm x 28mm) vented rotors (U.S.-spec)
JK/JKU rear: 11.9" x 1.1" (302mm x 28mm) vented rotors (U.S.-spec)

Note(s):
  • Requires a minimum wheel diameter of 17".
  • On JK/JKU models, we recommend upgrading the stock master cylinder and brake booster to the Mopar Master Cylinder & Brake Booster Kit (# P5160050). Contact your Mopar dealer for availability.
  • JL/JLU_JK/JKU: Delta Brake Kit - Front & Rear - 8x6.5" Bolt Pattern (# 4403480) also available.