Currently viewing: HOME > Wrangler JL 2018+ > Steering > Tie Rods / Ball Joints
Sort By:
Page of 1
Steeer Smarts YETI XD Tie Rod Adjuster Tube JL (2018+) Steer Smarts YETI XD Damper Bracket - 41035001 STEER SMARTS YETI XD JEEP WRANGLER TIE ROD ASSEMBLY JL/JLU Standard (2018+) - 78076001

Replacement YETI XD Tie Rod Adjuster Tubes for JL/JLU. Select either Standard or Rubicon length.

Part Numbers:

Standard: 07110001
Rubicon: 07119001

The YETI XD Series steering damper bracket was engineered to be the most robust damper bracket available for the Jeep Wrangler. It was designed to fit our YETI XD Tie Rod and will also fit most aftermarket 1 5/8" Tie Rods. The Yeti XD damper bracket was designed to be the most versatile damper bracket available for the JK. This one bracket will fit a standard steering stabilizer or a hydro assist ram without any modification.
STEER SMARTS is proud to present our most EXTREME steering linkage "The YETI XD Series" linkage for your Jeep JL Wrangler. We applied our 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for the Wrangler.

The YETI XD Tie Rod is a direct bolt-on for any JL Wrangler. The YETI XD Installs just minutes and there is no need to modify or alter Jeep.


FEATURES
  • YETI XD TIE ROD ASSEMBLY:
  • Easy bolt-on installation.
  • Engineered for proper clearance to other chassis components to eliminate interferences.
  • MADE IN THE USA
  • BALL JOINTS:
  • 30mm 1 1/2 Ton ball joints designed specifically for the JL.
  • Cold headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage.
  • Induction heat treated ball studs provide ultimate fatigue strength and superior off-road durability.
  • Steel on steel bearings provide exceptional ball joint wear resistance and robustness.
  • High quality seals ensure long ball joint life. Our superior seals have been rigorously tested to minimize leakage between grease service intervals which greatly improves our ball joint reliability over our competition.
  • Fully greaseable.

TIE ROD ENDS:
  • Powder coat over E-coat for a long lasting appearance under harsh conditions.
  • External threads are e-coated for durability and long term serviceability.
  • Forged from medium carbon high harden-ability steel and heat treated for greater buckling, impact, and fatigue strength.
  • Forged from medium carbon high hardenability steel and heat treated for even greater buckling, impact, and fatigue strength.
  • Large 1 1/4 inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads.
  • Unique “Reverse Pin” technology prevents our linkage from flopping or rocking. This technology is built into the socket unlike the weak external supports on some competitor linkages.

ADJUSTER TUBE:
  • Tie Rod adjuster is manufactured from large diameter 1/4 inch thick wall high strength 4130 Chromoly steel tubing for maximum buckling strength.
  • Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.
  • Designed with right hand and left hand threads for quick and easy adjustment when installed on the vehicle.
  • Internal threads and tube are also e-coated for long term serviceability.

* Tie Rod fits all left hand drive JL Wrangler models 2007 to 2017 including Rubicon and requires a 1 5/8" diameter damper bracket that is not included
STEER SMARTS YETI XD JEEP WRANGLER TIE ROD ASSEMBLY JL/JLU RUBICON (2018+) - 78088001
STEER SMARTS is proud to present our most EXTREME steering linkage "The YETI XD Series" linkage for your Jeep JL Wrangler. We applied our 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for the Wrangler.

The YETI XD Tie Rod is a direct bolt-on for any JL Wrangler. The YETI XD Installs just minutes and there is no need to modify or alter Jeep.


FEATURES
  • YETI XD TIE ROD ASSEMBLY:
  • Easy bolt-on installation.
  • Engineered for proper clearance to other chassis components to eliminate interferences.
  • MADE IN THE USA
  • BALL JOINTS:
  • 30mm 1 1/2 Ton ball joints designed specifically for the JL.
  • Cold headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage.
  • Induction heat treated ball studs provide ultimate fatigue strength and superior off-road durability.
  • Steel on steel bearings provide exceptional ball joint wear resistance and robustness.
  • High quality seals ensure long ball joint life. Our superior seals have been rigorously tested to minimize leakage between grease service intervals which greatly improves our ball joint reliability over our competition.
  • Fully greaseable.

TIE ROD ENDS:
  • Powder coat over E-coat for a long lasting appearance under harsh conditions.
  • External threads are e-coated for durability and long term serviceability.
  • Forged from medium carbon high harden-ability steel and heat treated for greater buckling, impact, and fatigue strength.
  • Forged from medium carbon high hardenability steel and heat treated for even greater buckling, impact, and fatigue strength.
  • Large 1 1/4 inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads.
  • Unique “Reverse Pin” technology prevents our linkage from flopping or rocking. This technology is built into the socket unlike the weak external supports on some competitor linkages.

ADJUSTER TUBE:
  • Tie Rod adjuster is manufactured from large diameter 1/4 inch thick wall high strength 4130 Chromoly steel tubing for maximum buckling strength.
  • Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.
  • Designed with right hand and left hand threads for quick and easy adjustment when installed on the vehicle.
  • Internal threads and tube are also e-coated for long term serviceability.

* Tie Rod fits all left hand drive JL Wrangler models 2007 to 2017 including Rubicon and requires a 1 5/8" diameter damper bracket that is not included