Currently viewing: HOME > Brands > Steer Smarts
Sort By:
Page of 1
Steer Smarts YETI XD JL/JLU Draglink with Griffin XD Attenuator Steer Smarts YETI XD JL/JLU Service Parts - Knuckle Side End (2018+) Steeer Smarts YETI XD Tie Rod Adjuster Tube JL (2018+)

STEER SMARTS is proud to present our most EXTREME steering linkage "The YETI XD" Series linkage equipped with our GRIFFIN XD Attenuator. We applied our 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for the Wrangler.

The YETI XD Draglinks are a complete bolt-on draglink. The YETI XD Draglinks install in just minutes and bolts to the factory tapered knuckle hole and the factory pitman arm hole.

YETI XD DRAGLINK WITH GRIFFIN XD ASSEMBLY:
  • Easy bolt-on installation.
  • Griffin XD Attenuator for the highest level of on-road and off-road stability and performance.
  • Engineered for proper clearance to other chassis components to eliminate interferences.
  • MADE IN THE USA
BALL JOINTS:
  • 30mm 1 1/2 Ton ball joints designed specifically for the JL.
  • Cold headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage.
  • Induction heat treated ball studs provide ultimate fatigue strength and superior off-road durability.
  • Steel on steel bearings provide exceptional ball joint wear resistance and robustness.
  • High-quality seals ensure long ball joint life. Our superior seals have been rigorously tested to minimize leakage between grease service intervals which greatly improves our ball joint reliability over our competition.
  • Fully greaseable.
DRAGLINK ENDS:
  • Powder coat over E-coat for a long lasting appearance under harsh conditions.
  • External threads are e-coated for durability and long term serviceability.
  • Forged from medium carbon high harden-ability steel and heat treated for greater buckling, impact, and fatigue strength.
  • Forged from medium carbon high hardenability steel and heat treated for even greater buckling, impact, and fatigue strength.
  • Large 1 1/4 inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads.
  • Unique "Reverse Pin" technology prevents our linkage from flopping or rocking. This technology is built into the socket unlike the weak external supports on some competitor linkage.
GRIFFIN XD ATTENUATOR:
  • Reduces harsh and negative feedback to your steering wheel.
  • Draglink adjuster is manufactured from large diameter 1/4 inch thick wall high strength 4130 Chromoly steel tubing for maximum buckling strength.
  • Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.
  • Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle.
  • E-coated for a long lasting appearance under harsh conditions.
  • Internal threads and tube are also e-coated for long term serviceability.
  • Designed for the proper clearance to other chassis components to eliminate interferences.
  • Patented Design.

*Draglink fits all left-hand drive JL Wrangler models 2007 to 2017 including Rubicon and Unlimited.

Note: A 17" wheels minimum is recommended. 16" wheels with a maximum 4.5" backspacing might fit but not guaranteed.

**Jeeps equipped with Anniversary Edition Factory Skid plates will need to slightly modify skid plate for clearance with GriffinXD


JL/JLU Yeti XD Draglink Replacement End (Passenger Side Knuckle).


Bottom Mount:
Part #: 77062002

No Drill Top Mount:
Part #: 77064002


Replacement YETI XD Tie Rod Adjuster Tubes for JL/JLU. Select either Standard or Rubicon length.

Part Numbers:

Standard: 07110001
Rubicon: 07119001

Steer Smarts YETI XD JL/JLU Stabilizer Relocation Bracket (Axle Side) - 79029001 Steer Smarts YETI XD Damper Bracket - 41035001 Steer Smarts YETI XD JL/JLU Draglink Adjuster Sleeve (2018+)
The YETI XD JL steering stabilizer relocation bracket was engineered to relocate your JL steering stabilizer mounting location from the tie rod to the front of the track bar mount. You will need this bracket if you are sticking with a bottom mount draglink and are upgrading to our YETI XD Tie Rod. The YETI XD Series steering damper bracket was engineered to be the most robust damper bracket available for the Jeep Wrangler. It was designed to fit our YETI XD Tie Rod and will also fit most aftermarket 1 5/8" Tie Rods. The Yeti XD damper bracket was designed to be the most versatile damper bracket available for the JK. This one bracket will fit a standard steering stabilizer or a hydro assist ram without any modification.

Replacement Yeti XD Draglink Adjuster Sleeve Assembly.

Steer Smarts YETI XD JL/JLU Track Bar Relocation Bracket - 79022001 STEER SMARTS YETI XD™ JL/JLU ADJUSTABLE FRONT TRACK BAR - 75040001 Steer Smarts Griffin XD Steering Attenuator JL/JLU
The YETI XD Track Bar relocation bracket is designed to correct the geometry of the track bar on Jeep Wrangler JL's that are equipped with a top-mounted draglink. This easy bolt-on solution will ensure that the track bar and top mounted dragline are proper alignment and aid in the reduction of bump steer. The YETI XD Track Bar relocation bracket is fabricated from 1/4" steel and E-coated for maximum durability. It includes all necessary hardware and installs in just minutes with basic hand tools.


TRACK BAR RELOCATION BRACKET:

  • Easy bolt-on installation.
  • E-coated for a long lasting appearance under harsh conditions.
  • Engineered for proper clearance to other chassis components to eliminate interferences.
  • Fabricated from 1/4" Steel for greater buckling, impact, and fatigue strength.
  • Designed to correct Track Bar geometry on Wrangler JL's equipped with a Top Mount Draglink.
  • Includes all necessary installation hardware.
  • MADE IN THE USA

The YETI XD Track Bar relocation bracket fits all left hand drive 2018+ JL/JLU Wrangler models equipped with a 3" or greater lift and running at least a 2.75" bump stop.

The YETI XD Adjustable Track Bar is fully adjustable on the vehicle and is designed to be the strongest track bar available for the Jeep Wrangler JL.


FEATURES
ADJUSTABLE TRACK BAR:
  • Easy bolt-on installation.
  • E-coated and powder coated for a long lasting appearance under harsh conditions.
  • Engineered for proper clearance to other chassis components to eliminate interferences.
  • Forged from 2" Steel for greater buckling, impact, and fatigue strength.
  • Designed to correct Track Bar geometry on the Jeep Wrangler JL
  • Fully adjustable on vehicle
  • Includes all necessary installation hardware.
  • MADE IN THE USA
The YETI XD Track Bar fits left hand drive 2018 to Current JL/JLU Wranglers.

The Griffin XD is a highly engineered, direct swap-out for your Yeti XD draglink adjusting sleeve. It is specifically designed for the extreme stresses of off-roading and reduces the harsh road feedback inherent in the JL steering system. Simply put, it makes the Jeep safer and gives you peace of mind while improving your driving experience.

Features

  • Reduces harsh and negative feedback to your steering wheel.
  • Easy Bolt On Installation.
  • Designed for the proper clearance to other chassis components to eliminate interference.
  • E-coated for a long lasting appearance under harsh conditions.
  • Patented Design.
  • MADE IN THE USA

The Griffin XD is recommended the following applications:

  • Wranglers equipped with 35" tires or larger.
  • Compatible with JK's equipped with a YETI XD Draglink.


*Jeeps equipped with Anniversary Edition Factory Skid plates will need to slightly modify skid plate to clearance for the Griffin XD

STEER SMARTS YETI XD JEEP WRANGLER TIE ROD ASSEMBLY JL/JLU Standard (2018+) - 78076001 STEER SMARTS YETI XD JEEP WRANGLER TIE ROD ASSEMBLY JL/JLU RUBICON (2018+) - 78088001 Steer Smarts Yeti XD Jeep Wrangler JL/JLU Draglink Bottom Mount - 78075001
STEER SMARTS is proud to present our most EXTREME steering linkage "The YETI XD Series" linkage for your Jeep JL Wrangler. We applied our 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for the Wrangler.

The YETI XD Tie Rod is a direct bolt-on for any JL Wrangler. The YETI XD Installs just minutes and there is no need to modify or alter Jeep.


FEATURES
  • YETI XD TIE ROD ASSEMBLY:
  • Easy bolt-on installation.
  • Engineered for proper clearance to other chassis components to eliminate interferences.
  • MADE IN THE USA
  • BALL JOINTS:
  • 30mm 1 1/2 Ton ball joints designed specifically for the JL.
  • Cold headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage.
  • Induction heat treated ball studs provide ultimate fatigue strength and superior off-road durability.
  • Steel on steel bearings provide exceptional ball joint wear resistance and robustness.
  • High quality seals ensure long ball joint life. Our superior seals have been rigorously tested to minimize leakage between grease service intervals which greatly improves our ball joint reliability over our competition.
  • Fully greaseable.

TIE ROD ENDS:
  • Powder coat over E-coat for a long lasting appearance under harsh conditions.
  • External threads are e-coated for durability and long term serviceability.
  • Forged from medium carbon high harden-ability steel and heat treated for greater buckling, impact, and fatigue strength.
  • Forged from medium carbon high hardenability steel and heat treated for even greater buckling, impact, and fatigue strength.
  • Large 1 1/4 inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads.
  • Unique “Reverse Pin” technology prevents our linkage from flopping or rocking. This technology is built into the socket unlike the weak external supports on some competitor linkages.

ADJUSTER TUBE:
  • Tie Rod adjuster is manufactured from large diameter 1/4 inch thick wall high strength 4130 Chromoly steel tubing for maximum buckling strength.
  • Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.
  • Designed with right hand and left hand threads for quick and easy adjustment when installed on the vehicle.
  • Internal threads and tube are also e-coated for long term serviceability.

* Tie Rod fits all left hand drive JL Wrangler models 2007 to 2017 including Rubicon and requires a 1 5/8" diameter damper bracket that is not included
STEER SMARTS is proud to present our most EXTREME steering linkage "The YETI XD Series" linkage for your Jeep JL Wrangler. We applied our 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for the Wrangler.

The YETI XD Tie Rod is a direct bolt-on for any JL Wrangler. The YETI XD Installs just minutes and there is no need to modify or alter Jeep.


FEATURES
  • YETI XD TIE ROD ASSEMBLY:
  • Easy bolt-on installation.
  • Engineered for proper clearance to other chassis components to eliminate interferences.
  • MADE IN THE USA
  • BALL JOINTS:
  • 30mm 1 1/2 Ton ball joints designed specifically for the JL.
  • Cold headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage.
  • Induction heat treated ball studs provide ultimate fatigue strength and superior off-road durability.
  • Steel on steel bearings provide exceptional ball joint wear resistance and robustness.
  • High quality seals ensure long ball joint life. Our superior seals have been rigorously tested to minimize leakage between grease service intervals which greatly improves our ball joint reliability over our competition.
  • Fully greaseable.

TIE ROD ENDS:
  • Powder coat over E-coat for a long lasting appearance under harsh conditions.
  • External threads are e-coated for durability and long term serviceability.
  • Forged from medium carbon high harden-ability steel and heat treated for greater buckling, impact, and fatigue strength.
  • Forged from medium carbon high hardenability steel and heat treated for even greater buckling, impact, and fatigue strength.
  • Large 1 1/4 inch rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads.
  • Unique “Reverse Pin” technology prevents our linkage from flopping or rocking. This technology is built into the socket unlike the weak external supports on some competitor linkages.

ADJUSTER TUBE:
  • Tie Rod adjuster is manufactured from large diameter 1/4 inch thick wall high strength 4130 Chromoly steel tubing for maximum buckling strength.
  • Adjuster clamps assure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts.
  • Designed with right hand and left hand threads for quick and easy adjustment when installed on the vehicle.
  • Internal threads and tube are also e-coated for long term serviceability.

* Tie Rod fits all left hand drive JL Wrangler models 2007 to 2017 including Rubicon and requires a 1 5/8" diameter damper bracket that is not included
STEER SMARTS is proud to present the most EXTREME steering linkage for your Jeep JL Wrangler, "The YETI XD Series" linkage. We applied our 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for the Wrangler.
Steer Smarts Yeti XD Jeep Wrangler JL/JLU No-Drill Top Mount - 78078001
STEER SMARTS is proud to present the most EXTREME steering linkage for your Jeep JL Wrangler, "The YETI XD Series" linkage. We applied our 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for the Wrangler.