Currently viewing: HOME > Brands > Motobilt
Sort By:
Page of 1
MOTOBILT JEEP JL SPARE TIRE TAG RELOCATION KIT WITH CAMERA MOUNT MOTOBILT JEEP JL SPARE TIRE TAG RELOCATION KIT WITH CAMERA MOUNT

The Motobilt Jeep JL Spare Tire Relocation Bracket Kit With Camera Mount is used to relocate your license plate and back up camera to the center of your spare tire. The Jeep JL factory tag mount is located on the bumper and is subject to damange and has to be relocated if your running an aftermarket bumper. The kit is laser cut from 1/8" steel and consists of 3 main pieces. The first part slips over the studs on your tire carrier with the spare tire removed. Then place your spare tire back on and secure the lug nuts holding the inner bracket in place. Next simply attach the outer part of the tag relocation bracket with the one bolt provided in the kit. The outer bracket is slotted so you can adjust for different wheel widths. The third piece is the camera mount which mounts underneath the tag. We changed the angle of the mount so that your view from the camera is unchanged from the factory. The bracket kit ships bare metal. You can simply spray paint with a rattle can to the color of your choice or have it powdercoated.
Features:
  • Jeep JL Spare Tire Tag Relocation Bracket Kit With Camera Mount
  • Includes mount for factory back up camera.
  • CNC cut from 1/8" high strength steel plate
  • Adjustable for different size wheels and off sets.
  • Sold as kit

Note:
Ships bare metal. Paint or powdercoat the color of your choice

Price: $149.00
MOTOBILT JEEP JL FRONT BUMPER 18+ WRANGLER JL W/FOG LIGHT HOLES THE HAMMER SERIES MOTOBILT JEEP JL FRONT BUMPER 18+ WRANGLER JL W/FOG LIGHT HOLES THE HAMMER SERIES

Motobilt now offers the Jeep JL Hammer front bumper with Fog Light Holes. It features built in provisions for factory style fog lights. The Motobilt Jeep JL Front Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA. Our JL Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JL. The bumper will fit all 2018 and newer models of the Jeep JL 2 door and 4 door JL Unlimited. The front d-ring mounts are CNC cut from 3/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.

The Hammer bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The Hammer bumper can be run with or without the optional skid plate. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JK The Hammer Bumper has bolt holes for a recovery winch.
Features:
  • Jeep JK The Hammer 48.5 inch front bumper
  • Fits 2018 and newer Jeep JL 2 door and 4 door JL Unlimited
  • Fabricated from 3/16 inch thick high strength steel plate
  • Bolt on design
  • 3/4 inch thick steel d-ring mounts
  • Pass through d-ring mounts weld to the bumper
  • Included Fog Light Holes
  • Pre-installed riv nuts for 10-24 screws for the factory fog lights
  • Made in the USA
  • Sold as each

Note:
  • If installing a winch, MB1002 fairlead mount will also need to purchased. See Related Parts.
  • Motobilt bumpers ship bare steel, paint or powdercoat needed before use.
  • No cutting required on the frame rails on your Jeep JL
  • Skid plate sold separately. See Related Parts.
  • LED fog light NOT included, but sold separately. See Related Parts

Price: $549.00
MOTOBILT JEEP JL TIRE CARRIER 18 + WRANGLER JL UP TO 40 INCH TIRE MOTOBILT JEEP JL TIRE CARRIER 18 + WRANGLER JL UP TO 40 INCH TIRE

Motobilt introduces the Jeep JL 2018 + spare tire carrier. This heavy duty tire carrier is a must have if you are running larger tires on your Jeep. The stock setup is not equipped to handle the extra weight of a larger tire and wheel setup. Our design takes all of the stress off of the factory tail gate and transfers it to our heavy duty steel carrier. The new JL tire carrier was designed using cutting edge computer modeling software. We laser cut, cnc form, and hand weld each unit to ensure it is perfect. We also engineered it to install easily with basic hand tools.

Price: $649.00
MOTOBILT JEEP JL FRONT BUMPER W/STINGER 18+ WRANGLER JL THE HAMMER SERIES MOTOBILT JEEP JL FRONT BUMPER W/STINGER 18+ WRANGLER JL THE HAMMER SERIES

Motobilt now offers the Jeep JL Hammer Stinger front bumper with fog light holes. It features DOM steel tube stinger and built in provisions for factory style fog lights. The Motobilt Jeep JL Front Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA.

Price: $668.00
MOTOBILT JEEP JL FRONT BUMPER W/BULL BAR CRUSHER 2018-PRESENT WRANGLER JL MOTOBILT JEEP JL FRONT BUMPER W/BULL BAR CRUSHER 2018-PRESENT WRANGLER JL

The Motobilt Jeep Wrangler JL Crusher recessed winch bumper with bull bar will provide you the ultimate in protection and recovery. The bumper allows you to secure your winch down low in between the frame rails. The winch bolt pattern will accept multiple style winches up to a Warn Zeon.

Price: $668.00
MOTOBILT JEEP JL FRONT BUMPER WITH SKID PLATE 18+ WRANGLER JL W/FOG LIGHT HOLES THE HAMMER SERIES MOTOBILT JEEP JL FRONT BUMPER WITH SKID PLATE 18+ WRANGLER JL W/FOG LIGHT HOLES THE HAMMER SERIES

Motobilt now offers the Jeep JL Hammer front bumper with skid plate and fog light holes. It features built in provisions for factory style fog lights and the skid plate is laser cut from 3/16 inch P and O steel and formed on a press brake. The Motobilt Jeep JL Front Hammer Bumper is a 48.5 inch wide, sleek, tight-fitting design proudly made in the USA. Our JL Hammer Bumper is 3D CAD designed to ensure the best possible fit to your Jeep JL. The bumper will fit all 2018 and newer models of the Jeep JL 2 door and 4 door JL Unlimited. The front d-ring mounts are CNC cut from 3/4 inch thick steel plate and pass through the bumper where they weld to the bumper mounting plates in addition to the bumper body. This was done for added strength to the recovery point.

The Hammer bumper has provisions to mount the factory fog lights or aftermarket LED fog lights. We have pre-installed riv nuts for 10-24 screws in the factory bolt pattern. The ends of the Hammer bumper taper up for tire clearance. Each cut in the bumper was intentional to keep it tight to the frame rail for a better approach angle. The main construction of the bumper is fabricated from 3/16 inch thick high strength steel plate. The bumper also serves as a winch mount. The top side of the JL Hammer bumper has bolt holes for a recovery winch.

Features:
  • Jeep JL Hammer 48.5 inch front bumper wth skid plate.
  • Fits 2018 and newer Jeep JL 2 door and 4 door JL Unlimited
  • Fabricated from 3/16 inch thick high strength steel plate
  • Bolt on design
  • 3/4 inch thick steel d-ring mounts
  • Pass through d-ring mounts weld to the bumper
  • Included Fog Light Holes
  • Pre-installed riv nuts for 10-24 screws for the factory fog lights
  • Made in the USA
  • Sold as each

Note:
  • If installing a winch, MB1002 fairlead mount will also need to purchased. See Related Parts.
  • Motobilt bumpers ship bare steel, paint or powdercoat needed before use.
  • No cutting required on the frame rails on your Jeep JL
  • LED fog light NOT included, but sold separately.

Price: $698.00
MOTOBILT JEEP JL FRONT BUMPER W/STINGER/SKID PLATE 18+ WRANGLER JL THE HAMMER SERIES MOTOBILT JEEP JL FRONT BUMPER W/STINGER/SKID PLATE 18+ WRANGLER JL THE HAMMER SERIES

Motobilt now offers the Jeep JL Hammer Stinger front bumper with skid plate and fog light holes.

Price: $817.00