Mounts ship raw unless otherwise requested
MOUNTS ONLY - Coilovers NOT included
PLEASE NOTE: If ordering your own coilovers special
configuration is required. Please contact a team member to ensure your
coilovers will be compatible.
The only coilover conversion for the 2007-2016 Jeep
Wrangler JK 2 and 4 door that addresses these important factors:
- Ease of install
Why Bolt On?
When our RECON system first came out, it went up
against a very popular weld-on system offered by our competition. However, it
addressed many concerns the weld on system didn't.
Time to install: RECON can be installed in one day,
by anyone. Don't have a welder? Don't have access to an installation bay? Don't
have years of suspension experience? Not a problem with our system. If you can
drill, line up bolt holes, and turn a wrench, you are 100% capable of
installing coilovers on your Jeep JK.
Reliability: Because our bracket system has zero
moving parts, there are no joints or hinges that can wear over time and fail.
Performance: Our RECON coilover conversion gives
your Jeep JK both unrivaled on road performance and off road stability and
articulation. Everything from daily driven Jeeps on 35” tires to wild builds
with 44” mud bogger tires each benefit from converting to coilovers.
Customizability: Because the brackets do not have to
endure heat from welding, your brackets can be custom powdercoated to retain a
color scheme you may have already started with your build. This is very
important to more customers than many think.
But - it's bolts...
Correct - and nothing against welding. In fact,
every single one of our brackets can be welded on if you so wish. Let's also
look at what else is bolted on your Jeep: wheels, brakes, drive shafts, engine,
seats, power steering box, etc etc etc. With the proper torque spec, bolting
suspension components on is perfectly safe.
What does bolt on gain me?
Several important factors. Installation is much less
time consuming, allowing for same day installation. Bolt on allows you to carry
the system with you. You can return a Jeep back to its original configuration
prior to sale, and reinstall the coilover kit on your next JK. A great option
for leased or rolled/damaged vehicles.
You put the rear coilovers where?
Yep, sticking out back, just begging to be beaten
up... or are they? Coilover springs are resilient. We’ve ran our R&D Jeep
JK with the original springs installed since day 1. They were powdercoated
orange prior to install, and its still the original powdercoat. Our shop JK,
more importantly its coilover springs, have survived all the trails in Moab,
the Rubicon trail, the Hammers trails, etc etc etc. Only damage so far? A few
chips on the exposed side of the spring. The coilovers still work perfectly,
have never leaked, and only have minor rashing.
Rear Coilovers Inside the Frame Rails?
Yep, and we tried outboard. Hard part is the width
of the wheel base and the frame rails relative to mounting. However, the
performance we’ve seen, and our customers get, from our RECON rear conversion
told us that we didn't need to research further moving the coilovers outboard.
What Control Arms Work?
Stock control arms, short adjustable control arms,
mid arm systems, and long arm systems are all compatible. Upgrade your
suspension around our conversion with no fear of outgrowing our kit!
Those Rear Lower Control Arm Mounts Look Like Skids…
They are! Our RECON rear lower coilover mounts also
double as control arm skids. Why Not Relocate the Mount Up? Say, 1.5”. Consider
what moving the shock/coilover up does. If installing a shock, but moving one
of it’s mounting points, your vehicle will overflex/overarticulate that shock
and cause it damage. That 1.5” of clearance has now cost you a shock. Instead,
leave it in it’s OEM location, but add a skid plate like the one included in our
lover coilover mount.
What’s My New Ride Height?
Our King Spec coilovers are adjustable from a 3.5”
lift to an 8” lift on your Jeep JK. 99% of the JKs that run our RECON
conversion utilize a 4-4.5” lift.
How Are RECON Spec Kings Coilovers Different?
We sat down with King years ago during R&D of
our conversion and discussed the very specific needs of a Jeep JK versus a race
buggy. Jeep’s need to have both extremely “street-wise” road manners as well as
off road stability, performance, and ride quality. Only our proprietary valved
King coilovers meet that criteria.
Every Jeep on the road is different. No two front or
rear ends weigh the same. Front and rear bumpers, winches, spare tires, engine
swaps all factor into the weight distribution of your Jeep. After ordering your
system online or during the process on the phone, we’ll discuss your Jeeps
modifications and send you coilovers with the proper springs already installed.
I Just Don’t Want to Use Kings
King knows coilovers. However, if you have another
brand in mind, please spec them accordingly: Raised plates 90-degree fittings.
We invite anyone to ride in a JK with our RECON
coilover conversion. On road and off road handling are unmatched. It's a smoother,
safer, and smarter ride all around. your
valuable coil overs, conversion brackets, and hardware.
Each system comes with:
- Rear upper coilover mounts
- Rear lower coilover mounts
- Grade 8 Hardware
- Full color installation instructions
- Minimum 30" brake lines
- Minimum 13" sway bar links